iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60068-2-6:1995

(Main)

Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)

Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)

Gives a method of test which provides a standard procedure to determine the ability of components, equipment and other articles to withstand specified severities of sinusoidal vibration. Has the status of a basic safety publication in accordance with IEC Guide 104.

Umweltprüfungen - Teil 2: Prüfungen - Prüfung Fc: Schwingen, sinusförmig

Essais d'environnement - Partie 2: Essais - Essai Fc: Vibrations (sinusoïdales)

Fournit une méthode d'essai qui donne des règles d'exécution normalisées pour déterminer l'aptitude des composants, matériels et autres articles, à résister à des sévérités spécifiées de vibrations sinusoïdales. A le statut d'une publication fondamentale de sécurité conformément au Guide 104.

Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)

General Information

Status
Withdrawn
Publication Date
13-Apr-1995
Withdrawal Date
29-Feb-1996
ICS
19.040 - Environmental testing
Technical Committee
CLC/SR 104 - Environmental conditions, classification and methods of test
Drafting Committee
IEC/TC 104 - IEC_TC_104
Parallel Committee
IEC/TC 104 - IEC_TC_104
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Feb-2011
Completion Date
01-Feb-2011
Ref Project
SIST EN 60068-2-6:2001 - Environmental testing -- Part 2: Tests - Test Fc: Vibration (sinusoidal)

Relations

Replaced By
EN 60068-2-6:2008 - Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
Effective Date
28-Jan-2023

Buy Standard

EN 60068-2-6:2001EN 60068-2-6:2001
PreviousNext
Standard
EN 60068-2-6:2001
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60068-2-6:2001
01-september-2001
Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)
Environmental testing -- Part 2: Tests - Test Fc: Vibration (sinusoidal)
Umweltprüfungen -- Teil 2: Prüfungen - Prüfung Fc: Schwingen, sinusförmig
Essais d'environnement -- Partie 2: Essais - Essai Fc: Vibrations (sinusoïdales)
Ta slovenski standard je istoveten z: EN 60068-2-6:1995
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
SIST EN 60068-2-6:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 2 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 3 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 4 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 5 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 6 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 7 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 8 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 9 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 10 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 11 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 12 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 13 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 14 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 15 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 16 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 17 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 18 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 19 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 20 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 21 ----------------------

SIST EN 60068-2-6:2001

---------------------- Page: 22 ----------------------

SI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60068-2-86:2024(Main)
Environmental testing - Part 2-86: Tests - Test Fx: Vibration - Multi-exciter and multi-axis method
SIST EN IEC 60068-2-86:2024

IEC 60068-2-86:2024 provides a test procedure for use with multi-exciter and multi-axis vibration test systems. The vibration test is intended for general application to components, equipment, and other products, hereinafter referred to as "specimens", subjected to dynamic environments that could arise during an equipment life cycle. Although this document is mainly intended for vibration testing, the procedure is also applied to certain types of shock and transient tests.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60721-2-6:2023/AC:2023-12(Corrigendum)
Classification of environmental conditions - Part 2-6: Environmental conditions appearing in nature - Earthquake vibration and shock
SIST EN IEC 60721-2-6:2023/AC:2024
  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-2-14:2023(Main)
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
SIST EN IEC 60068-2-14:2024

IEC 60068-2-14:2023 is available as IEC 60068-2-14:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-2-14:2023 provides tests with specified ambient temperature changes to analyse their impacts on specimens. This seventh edition cancels and replaces the sixth edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) updating of the figures for clarification purposes; b) updating of specimen temperature(s) and severities as well as tolerances for change of temperature tests; c) revision of standardized requirements for test reports for Tests Na and Nb.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-2-17:2023(Main)
Environmental testing - Part 2-17: Tests - Test Q: Sealing
SIST EN IEC 60068-2-17:2024

IEC 60068-2-17:2023 deals with seal tests applicable to the external and internal detection in container sealing of gross leaks and fine leaks to determine the effectiveness of seals of specimens. For further tests to verify the ability of enclosures, covers and seals to maintain components and equipment in good working order, IEC 60068‑2‑18 can be helpful. This fifth edition cancels and replaces the fourth edition published in 1994. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) "Survey of sealing tests" has been deleted and the relevant content moved to a new Clause 4 "General"; b) the Scope has been revised; c) the figures have been updated for clarification purposes; d) all non-SI units have been removed; e) the information to be given in the relevant specification has been revised.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-3-1:2023(Main)
Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
SIST EN IEC 60068-3-1:2024

IEC 60068-3-1:2023 is available as IEC 60068-3-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-3-1:2023 provides guidance regarding the performance of cold and dry heat tests. This third edition cancels and replaces the second edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) information relating to specimen temperatures has been revised; b) information relating to tests of multiple specimens has been revised; c) the effect of air density has been added; d) a recommendation for corrective actions regarding IR radiation has been added; e) the requirements for the mounting and supports of the specimen have been revised.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-3-4:2023(Main)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
SIST EN IEC 60068-3-4:2024

IEC 60068-3-4:2023 is available as IEC 60068-3-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-3-4:2023 provides the necessary information and the basic principles of the effect of humidity in the context of environmental testing to assist in preparing relevant specifications, such as standards for components or equipment. Furthermore, information is provided on operating climatic test chambers. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the requirements for distilled and deionized water have been revised; b) recommendations for the cleaning procedure of test chambers have been included; c) humidification systems (ultrasonic humidifiers and atomizers) have been added; d) the description of water penetration mechanisms has been refined.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60721-3-4:2019/AC:2023-08(Corrigendum)
Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations
SIST EN IEC 60721-3-4:2019/AC:2023
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60721-2-6:2023(Main)
Classification of environmental conditions - Part 2-6: Environmental conditions appearing in nature - Earthquake vibration and shock
SIST EN IEC 60721-2-6:2023

This part of IEC 60721 deals with environmental conditions appearing in nature related to earthquake vibrations and shocks. Its object is to define some fundamental properties and quantities for characterization of earthquakes as background material for the severities to which products are liable to be exposed during storage and use. Accelerations given are for ground surface conditions only. Conditions related to structures are referred to but restricted to general case descriptions.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60721-3-2:2018/AC:2022-07(Corrigendum)
Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and handling
SIST EN IEC 60721-3-2:2018/AC:2022

IEC Corrected version

  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60068-3-3:2019/AC:2021-10(Corrigendum)
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment
SIST EN IEC 60068-3-3:2019/AC:2021

20211015 - IEC Corrected version.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day