EN 61753-057-2:2013

Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment

IEC 61753-057-2:2012(E) contains the minimum initial test and measurement requirements and severities which a fibre optical fuse satisfies in order to be categorised as meeting the requirements of single mode fibre plug-receptacle style optical fuse used in controlled environments. Optical performance specified in this document relate to plug-receptacle style configuration fuses only. Keywords: initial test and measurement requirements, single mode fibre plug-receptacle style optical fuse

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 057-2: Optische Sicherung für Einmodenfasern in Steckverbinder-Buchse-Bauform für die Kategorie C - Kontrollierte Umgebung

Dispositifs d’interconnexion et composants passives à fibres optiques - Norme de performance - Partie 057-2: Fusible optique du type à fiche-embase à fibre unimodale pour catégorie C - Environnement contrôlé

IEC 61753-057-2: 2012 contient les exigences et les sévérités initiales minimales d’essai et de mesure auxquelles un fusible optique est tenu de satisfaire pour entrer dans une catégorie satisfaisant aux exigences du fusible optique du type fiche-embase à fibre unimodale, utilisé dans des environnements contrôlés. La performance optique spécifiée dans le présent document concerne des fusibles ayant des configurations de type fiche-embase uniquement. Mots clés : exigences mesure et initiale d’essai, fusible optique du type fiche-embase à fibre unimodale

Optični spojni elementi in pasivne komponente - Tehnični standard - 057-2. del: Optična varovalka vrste vtič-vtičnica-vtičnica za enorodno vlakno za kategorijo C - Nadzorovano okolje (IEC 61753-057-2:2012)

Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora izpolnjevati optična varovalka, da ustreza zahtevam za optične varovalke vrste vtič-vtičnica za enorodno vlakno, ki se uporabljajo v nadzorovanem okolju. V tem dokumentu navedena optična zmogljivost velja samo za varovalke vrste vtič-vtičnica.

General Information

• Status: Published
• Publication Date: 21-Mar-2013
• Withdrawal Date: 08-Jan-2016
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Mar-2013
• Completion Date: 22-Mar-2013
• Ref Project: SIST EN 61753-057-2:2013 - Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-recptacle-receptacle style optical fuse for category C - Controlled environment (IEC 61753-057-2:2012)

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2013
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
2SWLþQDYDURYDONDYUVWHYWLþYWLþQLFDYWLþQLFD]DHQRURGQRYODNQR]DNDWHJRULMR&
1DG]RURYDQRRNROMH,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 057-2: Single mode fibre plug-recptacle-receptacle style optical fuse for category C -
Controlled environment (IEC 61753-057-2:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
057-2: Optische Sicherung für Einmodenfasern in Steckverbinder-Buchse-Buchse-
Bauform für die Kategorie C - Kontrollierte Umgebung (IEC 61753-057-2:2012)
Dispositifs d’interconnexion et composants passives à fibres optiques - Norme de
performance - Partie 057-2: Fusible optique du type à fiche-embase à fibre unimodale
pour catégorie C - Environnement contrôlé (CEI 61753-057-2:2012)
Ta slovenski standard je istoveten z: EN 61753-057-2:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61753-057-2
NORME EUROPÉENNE
March 2013
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 057-2: Single mode fibre plug-receptacle style optical fuse for
category C -
Controlled environment
(IEC 61753-057-2:2012)
Dispositifs d’interconnexion et Lichtwellenleiter -
composants passives à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile -
Partie 057-2: Fusible optique du type à Betriebsverhalten -
fiche-embase à fibre unimodale pour Teil 057-2: Optische Sicherung für
catégorie C - Einmodenfasern in Steckverbinder-
Environnement contrôlé Buchse-Bauform für die Kategorie C -
(CEI 61753-057-2:2012) Kontrollierte Umgebung
(IEC 61753-057-2:2012)
This European Standard was approved by CENELEC on 2013-01-09. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-057-2:2013 E

Foreword
The text of document 86B/3501/FDIS, future edition 1 of IEC 61753-057-2, prepared by SC 86B, "Fibre
optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-057-2:2013.
The following dates are fixed:
(dop) 2013-10-09
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-01-09
standards conflicting with the

document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61753-057-2:2012 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 61753-057-2:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60793-2-50 - Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres

IEC 60869-1 - Fibre optic interconnecting devices and EN 60869-1 -
passive components - Fibre optic passive
power control devices -
Part 1: Generic specification
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)

IEC 61300-2-2 - Fibre optic interconnecting devices and EN 61300-2-2 -
passive components - Basic test and
measurement procedures -
Part 2-2: Tests - Mating durability

IEC 61300-2-6 - Fibre optic interconnecting devices and EN 61300-2-6 -
passive components - Basic test and
measurement procedures -
Part 2-6: Tests - Tensile strength of coupling
mechanism
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - High optical power

IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
Publication Year Title EN/HD Year

IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 -
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components

IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss
IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures -
Part 3-32: Examinations and measurements -
Polarisation mode dispersion measurement
for passive optical components

IEC 61754 Series Fibre optic connector interfaces EN 61754 Series

IEC 61755 Series Fibre optic connector optical interfaces EN 61755 Series

IEC/TR 62627-02 2010 Fibre optic interconnecting devices and - -
passive components -
Part 02: Report of round robin test results on
SC plug style fixed attenuators

IEC 61753-057-2 ®
Edition 1.0 2012-12
INTERNATIONAL
STANDARD
colour
inside
Fibre optic interconnecting devices and passive components – Performance

standard –
Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C –

Controlled environment
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
T
ICS 33.180.20 ISBN 978-2-83220-514-3

– 2 – 61753-057-2 © IEC:2012(E)
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Tests . 7
4 Test reports . 8
5 Performance requirements . 8
5.1 Sample size, sequencing and grouping. 8
5.2 Dimensions . 8
5.3 Test details and requirements . 8
Annex A (normative) Sample size and product sourcing requirements . 16
Annex B (normative) Threshold powers for optical fuses . 17
Annex C (normative) Reference connector and adaptor . 18
Annex D (informative) Example of style configuration for optical fuse . 19
Annex E (normative) Testing of optical fuses . 20
Bibliography . 23

Figure D.1 – Optical fuse, plug-receptacle style configuration . 19
Figure E.1 – Test set-up schematics . 20
Figure E.2 – Example of power threshold and blocking attenuation at threshold
measurements for sample 1280A of an optical fuse . 21
Figure E.3 – Response time curve of an optical fuse . 21
Figure E.4 – Response time testing set-up . 22

Table 1 – Performance requirements for optical fuses . 8
Table A.1 – Sample size and product sourcing requirements . 16
Table B.1 – Powers for optical fuses, single-mode . 17
Table C.1 – Requirements for reference connector and adaptor . 18

61753-057-2 © IEC:2012(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 057-2: Single mode fibre plug-receptacle
style optical fuse for category C –
Controlled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in
...