EN 61968-3:2004

Application integration at electric utilities - System interfaces for distribution management - Part 3: Interface for network operations

Specifies the information content of a set of message types that can be used to support many of the business functions related to network operations. Typical uses of the message types defined in this part include data acquisition by external systems, fault isolation, fault restoration, trouble management, maintenance of the plant, and the commissioning of the plant.

Integration von Anwendungen in Anlagen der Elektrizitätsversorgung - Systemschnittstellen für Netzführung - Teil 3: Schnittstelle für Netzbetriebsarten

Intégration des applications dans les entreprises de distribution électrique - Système d'interfaces pour la gestion de la distribution - Partie 3: Interface pour l'exploitation du réseau

Specifies the information content of a set of message types that can be used to support many of the business functions related to network operations. Typical uses of the message types defined in this part include data acquisition by external systems, fault isolation, fault restoration, trouble management, maintenance of the plant, and the commissioning of the plant.

Integracija aplikacij pri oskrbi z električno enegijo – Sistemski vmesniki za upravljanje omrežja – 3. del: Vmesniki za delovanje omrežja (IEC 61968-3:2004)

General Information

• Status: Withdrawn
• Publication Date: 01-Jun-2004
• Withdrawal Date: 30-Apr-2007
• ICS: 33.200 - Telecontrol. Telemetering
• Technical Committee: CLC/TC 57 - Power systems management and associated information exchange
• Drafting Committee: IEC/TC 57 - IEC_TC_57
• Parallel Committee: IEC/TC 57 - IEC_TC_57
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-May-2021
• Completion Date: 18-May-2021
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61968-3:2004 - Application integration at electric utilities - System interfaces for distribution management -- Part 3: Interface for network operations

Relations

• Replaced By: EN IEC 61968-3:2018 - Application integration at electric utilities - System interfaces for distribution management - Part 3: Interface for network operations
• Effective Date: 22-May-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2004
,QWHJUDFLMDDSOLNDFLMSULRVNUEL]HOHNWULþQRHQHJLMR±6LVWHPVNLYPHVQLNL]D
XSUDYOMDQMHRPUHåMD±GHO9PHVQLNL]DGHORYDQMHRPUHåMD,(&
Application integration at electric utilities - System interfaces for distribution management
-- Part 3: Interface for network operations
Integration von Anwendungen in Anlagen der Elektrizitätsversorgung -
Systemschnittstellen für Netzführung -- Teil 3: Schnittstelle für Netzbetriebsarten
Intégration des applications dans les entreprises de distribution électrique - Système
d'interfaces pour la gestion de la distribution -- Partie 3: Interface pour l'exploitation du
réseau
Ta slovenski standard je istoveten z: EN 61968-3:2004
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61968-3
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2004
ICS 33.200
English version
Application integration at electric utilities –
System interfaces for distribution management
Part 3: Interface for network operations
(IEC 61968-3:2004)
Intégration des applications  Integration von Anwendungen in Anlagen
dans les entreprises de distribution der Elektrizitätsversorgung -
électrique – Systemschnittstellen für Netzführung
Système d'interfaces pour la gestion Teil 3: Schnittstelle für Netzbetriebsarten
de la distribution (IEC 61968-3:2004)
Partie 3: Interface pour l'exploitation
du réseau
(CEI 61968-3:2004)
This European Standard was approved by CENELEC on 2004-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61968-3:2004 E
Foreword
The text of document 57/694/FDIS, future edition 1 of IEC 61968-3, prepared by IEC TC 57, Power
systems management and associated information exchange, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61968-3 on 2004-05-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-05-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61968-3:2004 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61968-3:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 61850-7-4 2003 Communication networks and systems in EN 61850-7-4 2003
substations
Part 7-4: Basic communication structure
for substation and feeder equipment -
Compatible logical node classes and data
classes
1) 2)
IEC 61968-1 - Application integration at electric utilities - EN 61968-1 2004
System interfaces for distribution
management
Part 1: Interface architecture and general
requirements
1)
Undated reference.
2)
Valid edition at date of issue.

INTERNATIONAL IEC
STANDARD 61968-3
First edition
2004-03
Application integration at electric utilities –
System interfaces for distribution management –
Part 3:
Interface for network operations
© IEC 2004 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale W
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
For price, see current catalogue

– 2 – 61968-3 © IEC:2004(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references.7
3 Reference and information models .8
3.1 General.8
3.2 Interface reference model.8
3.3 Network operations functions and components .8
3.4 Message type terms.10
3.5 Static information model.11
4 Message types – General .14
4.1 Message usage.14
4.2 Compliance.14
4.3 Message formats.14
4.4 Common message type fields.14
5 Network operations message types .20
5.1 Summary.20
5.2 Measurement list message types.20
5.3 OperationalRestriction message types.28
5.4 OutageRecord message types.30
5.5 SafetyDocument message types.32
5.6 SwitchingSchedule Message message types .33
5.7 Message format.33
Annex A (informative) Description of message type verbs.35
Figure 1 – Simplified operational documents model .11
Figure 2 –Generic pattern used for all message types.15
Figure 3 – Example (informative) of a control area used for all message types .15
Figure 4 – Naming class .16
Figure 5 – Document associations .17
Figure 6 – Document Class class details.18
Figure 7 – Person and role played by person relative to a document.19
Figure 8 – Person and role played by person relative to an organisation.20
Figure 9 – Measurement list message format.21
Figure 10 – Continuation of measurement list message format .22
Figure 11 – Measurement list – Measurement details.23
Figure 12 – Continuation of Measurement list – Measurement details .24
Figure 13 – Measurement list – Control details .25
Figure 14 – Continuation of Measurement list – Control details.26
Figure 15 – Operational restriction message format .29
Figure 16 – Outage record message format .31
Figure 17 – Outage record – Outage step details .32
Figure 18 – Switching schedule message format.34

61968-3 © IEC:2004(E) – 3 –
Table 1 – Document overview for IEC 61968-3 .6
Table 2 – Business functions for network operations.9
Table 3 – Classes for Network Operations .12
Table 4 – Classes related to network operations .13
Table 5 – Recommended measurement names.26
Table A.1 – Commonly used verbs.35

– 4 – 61968-3 © IEC:2004(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
APPLICATION INTEGRATION AT ELECTRIC UTILITIES –
SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT –
Part 3: Interface for network operations
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its tech
...