Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance

IEC 60793-1-1:2008(E) provides a list, and gives an overview of the documents giving the uniform requirements for measuring and testing optical fibres, thereby assisting in the inspection of fibres and cables for commercial (mostly telecommunications) purposes. The main changes with regard to the previous edition concern: - re-wording of Clause 8: Categories of optical fibres; - removal of Clause 10: Cross-reference of former test designations to current documents and removal of the bibliography.

Lichtwellenleiter - Teil 1-1: Mess- und Prüfverfahren - Allgemeines und Leitfaden

Fibres optiques - Partie 1-1: Méthodes de mesure et procédures d'essai - Généralités et lignes directrices

L'IEC 60793-1-1:2008 donne la liste, et les lignes directrices pour l'utilisation, des documents qui fournissent les exigences uniformes pour les mesures et les essais des fibres optiques, permettant ainsi le contrôle des fibres et des câbles proposés sur le marché (le plus souvent dans le domaine des télécommunications). Les méthodes d'essai et de mesure individuelles sont contenues dans les différentes parties de la série CEI 60793. Elles sont identifiées CEI 60793-1-X, où "X" est le numéro assigné à une sous-partie, indiquant qu'elle appartient à la CEI 60793-1. En général, les méthodes d'essai et de mesure s'appliquent à toutes les fibres multimodales de la classe A et à toutes les fibres unimodales de la classe B couvertes par la série CEI 60793-2, bien qu'il puisse exister des exceptions. L'article 1 de chaque partie de la CEI 60793 contient le domaine d'application pour chaque attribut particulier. Cette troisième édition annule et remplace la deuxième édition parue en 2002. Les principales modifications par rapport à l'édition antérieure sont indiquées ci-dessous: - ré-écriture de l'Article 8: Catégories des fibres optiques; - suppression de l'Article 10: Correspondance entre les anciennes désignations des essais et les documents actuels; suppression de la bibliographie. Mots clés: directrices pour l'utilisation, des documents qui fournissent les exigences uniformes pour les mesures et les essais des fibres optiques

Optična vlakna - 1-1. del: Metode merjenja in preskusni postopki - Splošno in smernice (IEC 60793-1-1:2008)

General Information

Status
Withdrawn
Publication Date
28-Aug-2008
Withdrawal Date
30-Jun-2011
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Mar-2020
Completion Date
01-Mar-2020

Relations

Buy Standard

Standard
EN 60793-1-1:2008
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60793-1-1:2008
01-oktober-2008
1DGRPHãþD
SIST EN 60793-1-1:2004
2SWLþQDYODNQDGHO0HWRGHPHUMHQMDLQSUHVNXVQLSRVWRSNL6SORãQRLQ
VPHUQLFH ,(&
Optical fibres - Part 1-1: Measurement methods and test procedures - General and
guidance (IEC 60793-1-1:2008)
Lichtwellenleiter - Teil 1-1: Mess- und Prüfverfahren - Allgemeines und Leitfaden (IEC
60793-1-1:2008)
Fibres optiques - Partie 1-1: Méthodes de mesure et procédures d'essai - Généralités et
guide (CEI 60793-1-1:2008)
Ta slovenski standard je istoveten z: EN 60793-1-1:2008
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
SIST EN 60793-1-1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60793-1-1

NORME EUROPÉENNE
August 2008
EUROPÄISCHE NORM

ICS 33.180.10 Supersedes EN 60793-1-1:2003


English version


Optical fibres -
Part 1-1: Measurement methods and test procedures -
General and guidance
(IEC 60793-1-1:2008)


Fibres optiques -  Lichtwellenleiter -
Partie 1-1: Méthodes de mesure Teil 1-1: Mess- und Prüfverfahren -
et procédures d'essai - Allgemeines und Leitfaden
Généralités et guide (IEC 60793-1-1:2008)
(CEI 60793-1-1:2008)




This European Standard was approved by CENELEC on 2008-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60793-1-1:2008 E

---------------------- Page: 2 ----------------------

EN 60793-1-1:2008 – 2 –
Foreword
The text of document 86A/1127/CDV, future edition 3 of IEC 60793-1-1, prepared by SC 86A, Fibres and
cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel Unique Acceptance
Procedure and was approved by CENELEC as EN 60793-1-1 on 2008-07-01.
This European Standard supersedes EN 60793-1-1:2003.
The main changes with regard to EN 60793-1-1:2003 concern:
– re-wording of Clause 8: Categories of optical fibres;
– removal of Clause 10: Cross-reference of former test designations to current documents;
– removal of the bibliography.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60793-1-1:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

– 3 – EN 60793-1-1:2008

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60793 Series Optical fibres EN 60793 Series
(mod)


1) 2)
IEC 60793-1-20 - Optical fibres - EN 60793-1-20 2002
Part 1-20: Measurement methods and test
procedures - Fibre geometry


1) 2)
IEC 60793-1-21 - Optical fibres - EN 60793-1-21 2002
Part 1-21: Measurement methods and test
procedures - Coati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.