CLC/TR 50090-9-2:2007
(Main)Home and Building Electronic Systems (HBES) - Part 9-2: Installation requirements - Inspection and testing of HBES installation
Home and Building Electronic Systems (HBES) - Part 9-2: Installation requirements - Inspection and testing of HBES installation
This document provides the specific requirements for inspectors and commissioning engineers (as defined in the document), on checking and approving HBES installations in order to ensure its quality and safe operation. The requirements apply to the HBES itself and its relations and interfaces with other systems and functions of buildings both inside and outside. Although this document contains recommendations for testing HBES and their interfaces, it is not intended to cover the mechanical aspects of the installation such as pressure testing pneumatic or hydraulic lines and systems, or checking for compliance with the pressure vessel directive, etc. These aspects are covered in other standards. Likewise, when the HBES interfaces with machinery or boilers, etc., such equipment should be tested in accordance with the relevant standard and manufacturer’s instructions. These requirements are intended to assist in the inspection, testing and commissioning of HBES systems. They are also intended as an aide to integration with the regulations for any other system that the HBES may need to interface with. These requirements are intended for applications in any building, or part of a building, for which the designer considers the HBES suitable. They may also apply to any addition or modification to a HBES within a building, which will affect the overall integrity of the HBES and give guidance that ongoing inspection and maintenance will be necessary to ensure the continued safe and efficient operation of an installed HBES.
Elektrische Systemtechnik für Heim und Gebäude (ESHG) - Teil 9-2: Installationsanforderungen - Prüfung der ESHG-Installation
Stanovanjski in stavbni elektronski sistemi (HBES) - 9-2. del: Inštalacijske zahteve - Pregledovanje in preskušanje inštalacij HBES
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CLC/TR 50090-9-2:2008
01-januar-2008
Stanovanjski in stavbni elektronski sistemi (HBES) - 9-2. del: Inštalacijske zahteve
- Pregledovanje in preskušanje inštalacij HBES
Home and Building Electronic Systems (HBES) - Part 9-2: Installation requirements -
Inspection and testing of HBES installation
Elektrische Systemtechnik für Heim und Gebäude (ESHG) - Teil 9-2:
Installationsanforderungen - Prüfung der ESHG-Installation
Ta slovenski standard je istoveten z: CLC/TR 50090-9-2:2007
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST-TP CLC/TR 50090-9-2:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
TECHNICAL REPORT
CLC/TR 50090-9-2
RAPPORT TECHNIQUE
October 2007
TECHNISCHER BERICHT
ICS 97.120
English version
Home and Building Electronic Systems (HBES) -
Part 9-2: Installation requirements -
Inspection and testing of HBES installation
This Technical Report was approved by CENELEC on 2007-04-27.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TR 50090-9-2:2007 E
---------------------- Page: 2 ----------------------
CLC/TR 50090-9-2:2007 - 2 -
Foreword
This Technical Report was prepared by the Technical Committee CENELEC TC 205, Home and
Building Electronic Systems (HBES).
The text of the draft was circulated for vote as prTS in accordance with the Internal Regulations, Part 2,
Subclause 11.4.3.3 and was approved by CENELEC as CLC/TR 50090-9-2 on 2007-04-27.
The 50090 series comprises the following parts:
Part 1: Standardization structure
Part 2: System overview
Part 3: Aspects of application
Part 4: Media independent layers
Part 5: Media and media dependent layers
Part 6: Interfaces
Part 7: System management
Part 8: Conformity assessment of products
Part 9: Installation requirements
______
---------------------- Page: 3 ----------------------
- 3 - CLC/TR 50090-9-2:2007
Contents
1 Scope . 4
2 Normative references. 4
3 Definitions . 5
4 General requirements. 6
4.1 Competency of inspectors and commissioning engineers. 6
4.2 Use of standard based products and non-standard based products. 6
4.3 Reports. 6
4.4 Alternative cabling solutions. 6
5 Purpose of inspection. 6
5.1 General. 6
5.2 Initial inspection. 7
5.3 Periodic inspection. 7
5.4 Path to inspecting a HBES. 7
5.5 Visual inspection. 8
6 Testing and commissioning . 8
6.1 General. 8
6.2 Passive testing and inspecting.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.