97.120 - Automatic controls for household use

IEC 63180:2020 provides a methodology and test procedures to be able to declare and verify the detection area for motion detectors using passive infrared technology in electronic control devices and appliance switches, whether stand-alone (direct control of one or more applications) or as part of home and building electronic systems or building automation control systems (HBES/BACS) or similar.

2019-03-19: to contact PM before proceeding with any assessment request.

This European Standard defines the mandatory and optional requirements for the medium specific physical and data link layer of power line Class 1 PL110.
Data link layer interface and general definitions, which are medium independent, are given in EN 50090 4-1.

EN-ISO 16484-6 provides a comprehensive set of procedures for verifying the correct implementation of each capability claimed on a BACnet PICS including:(a) support of each claimed BACnet service, either as an initiator, executor, or both,(b) support of each claimed BACnet object-type, including both required properties and each claimed optional property,(c) support of the BACnet network layer protocol,(d) support of each claimed data link option, and(e) support of all claimed special functional...view more

This European Standard defines the mandatory and optional requirements for the medium specific physical and data link layer for HBES Class 1 Twisted Pair TP1.
Data link layer interface and general definitions, which are media independent, are given in EN 50090 4 2.

This European Standard specifies a data model to abstract the metering world towards a simple external. The data model, as described by means of functional blocks contained in this European Standard, lays down the format of metering data

EN-IEC 60730-2-22  applies to the partial evaluation of thermal motor protectors asdefined in IEC 60730-1 for household and similar use, including heating, air conditioning andsimilar applications as well as for sealed (hermetic and semi-hermetic type) motorcompressors.NOTE A thermal motor protector is considered an integrated control since its protective functionality isdependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combinationwith the releva...view more

This European Standard defines the integration of KNX protocol implementations on top of Internet Protocol (IP) networks, called KNXnet/IP. It describes a standard protocol for KNX devices connected to an IP network, called KNXnet/IP devices. The IP network acts as a fast (compared to KNX transmission speed) backbone in KNX installations.
Widespread deployment of data networks using the Internet Protocol (IP) presents an opportunity to expand building control communication beyond the local KNX ...view more

This European Standard specifies a data model to abstract the metering world towards a simple external. The data model, as described by means of functional blocks contained in this European Standard, lays down the format of metering data

This European Standard defines the mandatory and optional requirements for the medium specific physical and data link layer for HBES Class 1 Twisted Pair TP1. Data link layer interface and general definitions, which are media independent, are given in EN 50090 4 2.

IEC 60730-2-22:2014 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for household and similar use, including heating, air conditioning and similar applications as well as for sealed (hermetic and semi-hermetic type) motor-compressors. A thermal motor protector is considered an integrated control since its protective functionality is dependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combination with the rele...view more

This European Standard specifies a communication protocol for networked control systems. The protocol provides peer-to-peer communication for networked control using web-services. The standard describes services in layer 2 and layer 3.
The layer 2 (data link layer) specification also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The layer 3 (network layer), as described in EN 14908-1, is integrated in UDP/IP communicatio...view more

This document specifies a communication protocol for networked control systems. The protocol provides peer-to-peer communication for networked control using web-services. The document describes services in layer 2 and layer 3.
The layer 2 (data link layer) specification also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The layer 3 (network layer), as described in EN 14908 1, is integrated in UDP/IP communication using I...view more

2016-03-08: WI transferred from CLC/SR 23 to CLC/TC 205 on TC request to PM (CV) (see dataservice on 2016-03-07)

This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2.

This document specifies EMC requirements for HBES/BACS to be installed in residential, commercial and light-industrial environments, according to the definition given in IEC 61000-6-1.