EN 61753-143-2:2013

Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment

IEC 61753-143-2:2012 contains the minimum test and measurement requirements and severity levels that a passive chromatic dispersion compensator (PCDC) using virtually imaged phased array (VIPA) must satisfy in order to be categorized as meeting the IEC standard, category C-controlled environments. Keywords: passive chromatic dispersion compensator (PCDC), using virtually imaged phased array (VIPA), category C

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 143-2: VIPA-basierender passiver optischer Dispersionskompensator für Einmodenfaserübertragung für die Kategorie C - Kontrollierte Umgebung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 143-2: Compensateur de dispersion reposant sur le VIPA passif optique de transmission par fibre unimodale pour la catégorie C - Environnement contrôlé

La CEI 61753-143-2:2012 contient les exigences minimales d'essais et de mesures ainsi que les niveaux de sévérité minimaux auxquels un compensateur de dispersion chromatique passif (PCDC) utilisant un réseau de phase à images virtuelles (VIPA) doit satisfaire afin d'être considéré comme satisfaisant aux critères de la catégorie C-environnements contrôlés, des normes CEI. Mots clés: compensateur de dispersion chromatique passif (PCDC), réseau de phase à images virtuelles (VIPA), catégorie C

Optični spojni elementi in pasivne komponente - Tehnični standard - 143-2. del: Optični pasivni kompenzator disperzije na podlagi VIPA pri prenosu po enorodnem optičnem vlaknu za kategorijo C - Nadzorovana okolja (IEC 61753-143-2:2012)

Ta del standarda IEC 61753 vsebuje minimalne zahteve za preskuse in meritve ter stopnje zahtevnosti, ki jih morajo izpolnjevati optični pasivni kompenzatorji disperzije (PCDC) na podlagi VIPA, da ustrezajo zahtevam kategorije C v standardu IEC – Nadzorovano okolje. Optični pasivni kompenzatorji disperzije se običajno uporabljajo za zmanjševanje optične disperzije med regeneratorji z dodajanjem optične disperzije k razponu z obratnim znakom kot ga ima skupna optična disperzija optičnega kabla in sestavnih delov. Zahteve zajemajo optične pasivne kompenzatorje disperzije brez priključkov, ki se uporabljajo v enokanalnem prenosu in prenosu multipleksiranja s porazdelitvijo valovne dolžine v enorodnih vlaknih (IEC 60793-2-50 B1/B2/B4).

General Information

• Status: Published
• Publication Date: 14-Feb-2013
• Withdrawal Date: 19-Dec-2015
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Feb-2013
• Completion Date: 15-Feb-2013
• Ref Project: SIST EN 61753-143-2:2013 - Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environments (IEC 61753-143-2:2012)

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2013
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
2SWLþQLSDVLYQLNRPSHQ]DWRUGLVSHU]LMHQDSRGODJL9,3$SULSUHQRVXSR
HQRURGQHPRSWLþQHPYODNQX]DNDWHJRULMR&1DG]RURYDQDRNROMD,(&

Fibre optic interconnecting devices and passive components - Performance standard -
Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre
transmission for category C - Controlled environments (IEC 61753-143-2:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
143-2 VIPA-basierender passiver optischer Dispersionskompensator für
Einmodenfaserübertragung für die Kategorie C - Kontrollierte Umgebung (IEC 61753-
143-2:2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 143-2: Compensateur de dispersion reposant sur le VIPA passif
optique de transmission par fibre unimodale pour la catégorie C - Environnement
contrôlé (CEI 61753-143-2:2012)
Ta slovenski standard je istoveten z: EN 61753-143-2:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61753-143-2
NORME EUROPÉENNE
February 2013
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 143-2: Optical passive VIPA-based dispersion compensator of single-
mode fibre transmission for category C -
Controlled environment
(IEC 61753-143-2:2012)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile - Betriebsverhalten -
Partie 143-2: Compensateur de dispersion Teil 143-2: VIPA-basierender passiver
reposant sur le VIPA passif optique de optischer Dispersionskompensator für
transmission par fibre unimodale pour la Einmodenfaserübertragung für die
catégorie C - Kategorie C -
Environnement contrôlé Kontrollierte Umgebung
(CEI 61753-143-2:2012) (IEC 61753-143-2:2012)

This European Standard was approved by CENELEC on 2012-12-20. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-143-2:2013 E

Foreword
The text of document 86B/3491/FDIS, future edition 1 of IEC 61753-143-2, prepared by SC 86B,
"Fibre optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-143-2:2013.
The following dates are fixed:
(dop) 2013-09-20
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-12-20
standards conflicting with the

document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-143-2:2012 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61978-1 NOTE  Harmonized as EN 61978-1.

- 3 - EN 61753-143-2:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60793-1 Series Optical fibres - EN 60793-1 Series
Part 1: Measurement methods and test
procedures
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres

IEC 61300 Series Fibre optic interconnecting devices and EN 61300 Series
passive components - Basic test and
measurement procedures
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)

IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention

IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 -
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components

IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures -
Part 3-32: Examinations and measurements -
Polarisation mode dispersion measurement
for passive optical components

IEC 61300-3-38 - Fibre optic interconnecting devices and EN 61300-3-38 -
passive components - Basic test and
measurement procedures -
Part 3-38:Examinations and measurements -
Group delay, chromatic dispersion and phase
ripple
IEC 61753-1 - Fibre optic interconnecting devices and EN 61753-1 -
passive components performance standard -
Part 1: General and guidance for performance
standards
IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices -
Part 1: Generic specification
IEC 61753-143-2 ®
Edition 1.0 2012-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance

standard –
Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode

fibre transmission for category C – Controlled environment

Dispositifs d’interconnexion et composants passifs à fibres optiques – Norme

de performance –
Partie 143-2: Compensateur de dispersion reposant sur le VIPA passif optique

de transmission par fibre unimodale pour la catégorie C – Environnement

contrôlé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 33.180.20 ISBN 978-2-83220-470-2

– 2 – 61753-143-2  IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviations . 7
4 Test . 8
5 Test report . 8
6 Performance requirements . 8
6.1 Reference components . 8
6.2 Dimensions . 9
6.3 Sample size . 9
6.4 Test details and requirements . 9
Annex A (normative) Sample size . 17
Annex B (informative) Virtually imaged phased array (VIPA) Technology . 18
Bibliography . 20

Figure B.1 – Structure of virtually imaged phased array (VIPA) . 18
Figure B.2 – Detailed light path and mechanism of generating chromatic dispersion . 19

Table 1 – Test and requirements for C-band and L-band WDM application . 10
Table 2 – Test and requirements for C-band WDM application . 11
Table 3 – Test and requirements for L-band WDM application . 12
Table 4 – Common test and requirements . 13
Table A.1 – Sample size . 17

61753-143-2  IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 143-2: Optical passive VIPA-based dispersion
compensator of single-mode fibre transmission for category C –
Controlled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work
...