prEN IEC 61810-7-29:2023

Electrical relays - Tests and Measurements - Part 7-29: Capacitance

Elektromechanische Elementarrelais – Prüfungen und Messungen – Teil 7-29: Kapazität

Električni releji - Preskusi in meritve - 7-29. del: Kapacitivnost

General Information

• Status: Not Published
• Publication Date: 04-May-2025
• ICS: 29.120.70 - Relays
• Technical Committee: CLC/SR 94 - All-or-nothing electrical relays
• Drafting Committee: CLC/SR 94 - All-or-nothing electrical relays
• Current Stage: 4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
• Start Date: 05-Jan-2024
• Completion Date: 05-Jan-2024
• Ref Project: oSIST prEN IEC 61810-7-29:2023 - Electrical relays - Tests and Measurements - Part 7-29: Capacitance

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 61810-7-29:2023
01-december-2023
Električni releji - Preskusi in meritve - 7-29. del: Kapacitivnost
Electrical relays - Tests and Measurements - Part 7-29: Capacitance
Ta slovenski standard je istoveten z: prEN IEC 61810-7-29:2023
ICS:
29.120.70 Releji Relays
oSIST prEN IEC 61810-7-29:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61810-7-29:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 61810-7-29:2023

94/954/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61810-7-29 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-10-13 2024-01-05
SUPERSEDES DOCUMENTS:
94/800/CD, 94/950/CC

IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Electrical relays - Tests and Measurements - Part 7-29: Capacitance

PROPOSED STABILITY DATE: 2025

NOTE FROM TC/SC OFFICERS:


Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You
may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permis sion in
writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 61810-7-29:2023
94/954/CDV – 2 – IEC CDV 61810-7-29 © IEC: 2023
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 Procedure . 6
7 5 Evaluation . 6
8 Annex T (normative) Test report . 7
9 Bibliography . 8
10
11
12
13
14

---------------------- Page: 4 ----------------------
oSIST prEN IEC 61810-7-29:2023
IEC CDV 61810-7-29 © IEC: 2023 – 3 – 94/954/CDV
15 INTERNATIONAL ELECTROTECHNICAL COMMISSION
16 ____________
17
18 ELECTROMECHANICAL ELEMENTARY RELAYS –
19
20 Part 7-29: Capacitance
21
22 FOREWORD
23 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
24 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
25 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
26 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
27 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
28 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
29 may participate in this preparatory work. International, governmental and n
...