Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis

IEC 60297-3-105:2008 specifies the dimensions for 1U chassis mounted into IEC 60297-3-100 compliant racks/cabinets where dimensions, loaded weight and accessibility require differing assembly methods. Guidance for cooling and reference for EMC, seismic and for the climatic and mechanical requirements and tests are provided, as defined in the IEC 61587 series.

Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-Zoll-)Bauweise - Teil 3-105: Maße und Ausführungen von 1U-Einschüben

Structures mécaniques pour équipements électroniques - Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) - Partie 3-105: Dimensions et aspects de conception pour les châssis d'une hauteur de 1U

La CEI 60297-3-105:2008 spécifie les dimensions pour les châssis de 1U montés dans des bâtis/baies conformes à la CEI 60297-3-100, où les dimensions, le poids et l'accessibilité exigent différentes méthodes d'assemblage. Des lignes directrices pour le refroidissement et une référence pour les exigences et les essais de CEM, sismiques, climatiques et mécaniques sont fournies, comme défini dans la série CEI 61587.

Mehanske konstrukcije za elektronske strukture - Mere mehanskih konstrukcij serije 482,6 mm (19 palcev) - 3-105. del: Mere in načrtovalni vidiki za šasije 1U (IEC 60297-3-105:2008)S

General Information

Status
Published
Publication Date
07-Jan-2009
Withdrawal Date
30-Nov-2011
Current Stage
6060 - Document made available - Publishing
Start Date
08-Jan-2009
Completion Date
08-Jan-2009

Buy Standard

Standard
EN 60297-3-105:2009
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RQVWUXNFLM6Bauweisen für elektronische Einrichtungen - Maße der 482,6-mm-(19-Zoll-)Bauweise - Teil 3-105: Maße und Ausführungen von 1U-Einschüben (IEC 60297-3-105:2008)Structures mécaniques pour équipements électroniques - Dimensions des structures mécaniques de la série 482,6 mm (19 in) - Partie 3-105: Dimensions et aspects de conception pour les châssis d'une hauteur de 1U (CEI 60297-3-105:2008)Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U chassis (IEC 60297-3-105:2008)31.240Mehanske konstrukcije za elektronsko opremoMechanical structures for electronic equipmentICS:Ta slovenski standard je istoveten z:EN 60297-3-105:2009SIST EN 60297-3-105:2009en,fr01-april-2009SIST EN 60297-3-105:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60297-3-105 NORME EUROPÉENNE
EUROPÄISCHE NORM January 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60297-3-105:2009 E
ICS 31.240
English version
Mechanical structures for electronic equipment -
Dimensions of mechanical structures of the 482,6 mm (19 in) series -
Part 3-105: Dimensions and design aspects for 1U high chassis (IEC 60297-3-105:2008)
Structures mécaniques
pour équipements électroniques -
Dimensions des structures mécaniques
de la série 482,6 mm (19 pouces) -
Partie 3-105: Dimensions et aspects
de conception pour les châssis
d'une hauteur de 1U (CEI 60297-3-105:2008)
Bauweisen für
elektronische Einrichtungen -
Maße der 482,6-mm-(19-Zoll-)Bauweise - Teil 3-105: Maße und Ausführungen
von 1U-Einschüben (IEC 60297-3-105:2008)
This European Standard was approved by CENELEC on 2008-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
- 2 -
Foreword The text of document 48D/381/FDIS, future edition 1 of IEC 60297-3-105, prepared by SC 48D, Mechanical structures for electronic equipment, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60297-3-105 on 2008-12-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2009-09-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-12-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60297-3-105:2008 was approved by CENELEC as a European Standard without any modification. __________
- 3 - EN 60297-3-105:2009 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-581 -1) International Electrotechnical Vocabulary (IEV) -
Part 581: Electromechanical components for electronic equipment - -
IEC 60297-3-100 -1) Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -
Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets EN 60297-3-100 20092)
IEC 60917-1 -1) Modular order for the development of mechanical structures for electronic equipment practices -
Part 1: Generic standard EN 60917-1 19982)
IEC 61587-1 -1) Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -
Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis EN 61587-1 20072)
IEC 61587-2 -1) Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -
Part 2: Seismic tests for cabinets and racks EN 61587-2 20012)
IEC 61587-3 -1) Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -
Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks EN 61587-3 20062)
1) Undated reference. 2) Valid edition at date of issue. SIST EN 60297-3-105:2009

IEC 60297-3-105Edition 1.0 2008-11INTERNATIONAL STANDARD NORME INTERNATIONALEMechanical structures for electronic equipment – Dimensions of mechanical structures of the 482,6 mm (19 in) series –
Part 3-105: Dimensions and design aspects for 1U high chassis
Structures mécaniques pour équipements électroniques – Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) –
Partie 3-105: Dimensions et aspects de conception pour les châssis d’une hauteur de 1U
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE QICS 31.240 PRICE CODECODE PRIXISBN 2-8318-1017-8
– 2 – 60297-3-105 © IEC:2008 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 Arrangement overview.7 5 Dimensions of the 1U chassis.9 5.1 Chassis type A.9 5.2 Chassis type B.10 5.3 Chassis type C.11 6 Climatic, mechanical tests (safety aspects, EMC, seismic).12 Annex A (informative)
Chassis and rack/cabinet relationship.13 Annex B (informative)
Cooling air flow.15 Annex C (informative)
Chassis depth relationship to the rack/cabinet.16
Figure 1 – Chassis type A.8 Figure 2 – Chassis type B.8 Figure 3 – Chassis type C.8 Figure 4 – Dimensions of chassis type A.9 Figure 5 – Dimensions of chassis type B.10 Figure 6 – Dimensions of chassis type C.11 Figure A.1 – Chassis type B and rack/cabinet relationship.13 Figure A.2 – Chassis type C rack/cabinet relationship.14 Figure B.1 – Cooling airflow direction.15
Table C.1 – Maximum depth D in relation to corresponding cabinet depth.16
60297-3-105 © IEC:2008 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ______________
MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT –
DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 mm (19 in) SERIES –
Part 3-105: Dimensions and design aspects for 1U high chassis
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60297-3-105 has been prepared by subcommittee 48D: Mechanical structures for electronic equipment, of IEC technical committee 48: Electromechanical components and mechanical structures for electronic equipment. The text of this standard is based on the following documents: FDIS Report on voting 48D/381/FDIS 48D/387/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. SIST EN 60297-3-105:2009

– 4 – 60297-3-105 © IEC:2008 A list of all parts of IEC 60297 series, published under the general title Mechanical structures for electronic equipment – Dimensions of mechanical structures of the 482,6 mm (19 in) series, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
60297-3-105 © IEC:2008 – 5 – INTRODUCTION Electronic systems based on 1U chassis design have become one of the most important platforms used for servers, industrial electronics, information technology (IT) and telecommunication equipment. 1U chassis are sometimes referred to as “Pizza Boxes”. Applications for 1U chassis designs are wide spread and solutions are found in every segment of the electronics industry. IEC 60297-3-100 defines the dimensional rack/cabinet details such as the available aperture and the front panel mounting dimensions. However, IEC 60297-3-100 falls short of providing guidance or dimensional requirements for assembling 1U chassis designs into these IEC 60297 conforming racks/cabinets either in singles or in multiples (stacked in n × 1U). This part of IEC 60297 will give guidance and provide for di
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.