EN 61753-053-2:2014

Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments

IEC 61753-053-2:2014(E) contains the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre electrically controlled variable optical attenuator needs to satisfy in order to be categorised as meeting the requirements of category C-Controlled environments, as defined in Annex A of IEC 61753-1:2007. Keywords: non-connectorized single-mode fibre electrically controlled variable optical attenuator, category C-Controlled environments

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 053-2: Nicht mit Steckverbindern versehene, elektrisch kontrolliert änderbare optische Dämpfungsglieder für Einmodenfasern für die Kategorie C - Kontrollierte Umgebung

Dispositifs d’interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 053-2: Affaiblisseur optique variable commandé électriquement, à fibres unimodales non connectorisé pour la catégorie C - Environnements contrôlés

IEC 61753-053-2:2014 contient les exigences et les sévérités initiales minimales d'essais et de mesures auxquelles un affaiblisseur optique variable commandé électriquement, auxquelles un affaiblisseur optique variable commandé électriquement aux exigences applicables à la catégorie C - Environnements contrôlés, tel que défini dans l'Annexe A de l'IEC 61753-1:2007. Mots clés: affaiblisseur optique variable commandé électriquement, catégorie C - Environnements contrôlés

Optični spojni elementi in pasivne komponente - Tehnični standard - 053-2. del: Električno krmiljeni spremenljivi optični slabilnik brez konektorjev za enorodna vlakna za kategorijo C - Nadzorovana okolja (IEC 61753-053-2:2014)

Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora električno krmiljeni spremenljivi optični slabilnik brez konektorjev za enorodna vlakna izpolnjevati, da izpolnjuje zahteve kategorije C – nadzorovano okolje, kakor je določeno v Dodatku A standarda IEC 61753-1:2007.

General Information

• Status: Withdrawn
• Publication Date: 17-Jul-2014
• Withdrawal Date: 22-Apr-2017
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 31-Aug-2023
• Completion Date: 31-Aug-2023
• Ref Project: SIST EN 61753-053-2:2014 - Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorised single-mode fibre electrically controlled variable optical attenuator for category C - Controlled environments

Relations

• Replaced By: EN IEC 61753-053-02:2022 - Fibre optic interconnecting devices and passive components - Performance standard - Part 053-02: Non-connectorized, single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments
• Effective Date: 13-Sep-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2014
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
(OHNWULþQRNUPLOMHQLVSUHPHQOMLYLRSWLþQLVODELOQLNEUH]NRQHNWRUMHY]DHQRURGQD
YODNQD]DNDWHJRULMR&1DG]RURYDQDRNROMD,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 053-2: Non-connectorised single-mode fibre electrically controlled variable optical
attenuator for category C - Controlled environments
Ta slovenski standard je istoveten z: EN 61753-053-2:2014
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61753-053-2

NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 053-2: Non-connectorized single-
mode fibre, electrically controlled, variable optical attenuator for
category C - Controlled environments
(IEC 61753-053-2:2014)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Norme de performance - Partie 053-2: Bauteile - Betriebsverhalten - Teil 053-2: Nicht mit
Affaiblisseur optique variable commandé électriquement, à Steckverbindern versehene, elektrisch kontrolliert
fibres unimodales non connectorisé pour la catégorie C - änderbare optische Dämpfungsglieder für Einmodenfasern
Environnements contrôlés für die Kategorie C - Kontrollierte Umgebung
(CEI 61753-053-2:2014) (IEC 61753-053-2:2014)
This European Standard was approved by CENELEC on 2014-04-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61753-053-2:2014 E

Foreword
The text of document 86B/3645/CDV, future edition 1 of IEC 61753-053-2, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-053-2:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-01-23
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-04-23
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-053-2:2014 was approved by CENELEC as a
European Standard without any modification.

- 3 - EN 61753-053-2:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 -  Optical fibres -- Part 2-50: Product EN 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 -  Optical fibre cables -- Part 2-50: Indoor EN 60794-2-50 -
cables - Family specification for simplex
and duplex cables for use in terminated
cable assemblies
IEC 60869-1 -  Fibre optic interconnecting devices and EN 60869-1 -
passive components - Fibre optic passive
power control devices -- Part 1: Generic
specification
IEC 61300 series Fibre optic interconnecting devices and EN 61300 series
passive components - Basic test and
measurement procedures
IEC 61300-2-1 -  Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -- Part 2-1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 -  Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -- Part 2-4: Tests
- Fibre/cable retention
IEC 61300-2-9 -  Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -- Part 2-9: Tests
- Shock
+AC 2011
IEC 61300-2-14 -  Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -- Part 2-14:
Tests - High optical power
IEC 61300-2-17 -  Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -- Part 2-17:
Tests - Cold
IEC 61300-2-18 -  Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -- Part 2-18:
Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 -  Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -- Part 2-19:
Tests - Damp heat (steady state)
IEC 61300-2-22 -  Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -- Part 2-22:
Tests - Change of temperature
IEC 61300-2-42 -  Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -- Part 2-42:
Tests - Static side load for strain relief
IEC 61300-3-2 -  Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -- Part 3-2:
Examinations and measurements -
Polarization dependent loss in a single-
mode fibre optic device
IEC 61300-3-3 -  Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures -- Part 3-3:
Examinations and measurements - Active
monitoring of changes in attenuation and
return loss
IEC 61300-3-7 -  Fibre optic interconnecting devices and EN 61300-3-7 -
(mod) passive components - Basic test and
measurement procedures -- Part 3-7:
Examinations and measurements -
Wavelength dependence of attenuation
and return loss of single mode components
+FprAA 2011
IEC 61300-3-14 -  Fibre optic interconnecting devices and EN 61300-3-14 -
passive components - Basic test and
measurement procedures -- Part 3-14:
Examinations and measurements -
Accuracy and repeatability of the
attenuation settings of a variable attenuator
IEC 61300-3-21 -  Fibre optic interconnecting devices and FprEN 61300-3--
passive components - Basic test and 21
measurement procedures - Part 3-21:
Examinations and measurements -
Switching time
IEC 61753-1 2007 Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance standard
-- Part 1: General and guidance for
performance standards
IEC/TR 62343-6-5 -  Dynamic modules - Part 6-5: Design guide - -
- Investigation of operating mechanical
shock and vibration tests for dynamic
modules
IEC 61753-053-2 ®
Edition 1.0 2014-03
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance

standard –
Part 053-2: Non-connectorized, single-mode fibre, electrically controlled,

variable optical attenuator for category C – Controlled environments

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
M
ICS 33.180.20 ISBN 978-2-8322-1485-5

– 2 – IEC 61753-053-2:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test conditions . 6
5 Test report . 7
6 Reference components . 7
7 Performance requirements . 7
7.1 Dimensions . 7
7.2 Test details and requirements . 7
Annex A (normative) Sample size . 11
Bibliography . 12

Table 1 – Single-mode spectral bands . 7
Table 2 – Test details and requirements . 8
Table A.1 – Number of samples for each test . 11

IEC 61753-053-2:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –

Part 053-2: Non-connectorized, single-mode fibre, electrically controlled,
variable optical attenuator for category C – Controlled environments

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they hav
...