EN 61753-056-2:2013
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment
IEC 61753-056-2:2012(E) contains the minimum initial test and measurement requirements and severities which a fibre optical fuse satisfies in order for it to be categorised as meeting the requirements of single mode fibre pigtailed style optical fuse used in controlled environments. Optical performance specified in this document relates to in-line type configurations fuses only. Keywords: initial test and measurement requirements, single mode fibre pigtailed style optical fuse
Lichtwellenleiter - Verbindungselemente und passive Bauteile – Betriebsverhalten - Teil 056-2: Optische Sicherung mit Einmoden-Pigtail für die Kategorie C - Kontrollierte Umgebung
Dispositifs d’interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 056-2 : Fusible optique de type fibre amorce en fibre unimodale pour catégorie C - Environnement contrôlé
IEC 61753-056-2: 2012 contient les exigences et les sévérités initiales minimales d’essai et de mesure auxquelles un fusible optique est tenu de satisfaire pour entrer dans une catégorie satisfaisant aux exigences du fusible optique du type fibre amorce à fibre unimodale, utilisé dans des environnements contrôlés. La performance optique spécifiée dans le présent document concerne des fusibles ayant des configurations de type en ligne uniquement. Mots clés: exigences mesure et initiale d’essai, fusible optique du type fibre amorce à fibre unimodale
Optični spojni elementi in pasivne komponente - Tehnični standard - 056-2. del: Svitkasta optična varovalka enorodnega vlakna za kategorijo C - Nadzorovano okolje (IEC 61753-056-2:2012)
Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora izpolnjevati optična varovalka, da ustreza zahtevam za svitkaste optične varovalke enorodnega vlakna, ki se uporabljajo v nadzorovanem okolju. V tem dokumentu navedena optična zmogljivost velja samo za varovalke z linijsko konfiguracijo.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2013
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
6YLWNDVWDRSWLþQDYDURYDONDHQRURGQHJDYODNQD]DNDWHJRULMR&1DG]RURYDQR
RNROMH ,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled
environment (IEC 61753-056-2:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile – Betriebsverhalten – Teil
056-2: Optische Sicherung mit Einmoden-Pigtail für die Kategorie C – Kontrollierte
Umgebung (IEC 61753-056-2:2012)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 056-2 : Fusible optique de type fibre amorce en fibre unimodale
pour catégorie C - Environnement contrôlé (CEI 61753-056-2:2012)
Ta slovenski standard je istoveten z: EN 61753-056-2:2013
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61753-056-2
NORME EUROPÉENNE
February 2013
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 056-2: Single mode fibre pigtailed style optical fuse for category C -
Controlled environment
(IEC 61753-056-2:2012)
Dispositifs d’interconnexion et Lichtwellenleiter -
composants passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile - Betriebsverhalten -
Partie 056-2 : Fusible optique de type fibre Teil 056-2: Optische Sicherung mit
amorce en fibre unimodale Einmoden-Pigtail für die Kategorie C -
pour catégorie C - Kontrollierte Umgebung
Environnement contrôlé (IEC 61753-056-2:2012)
(CEI 61753-056-2:2012)
This European Standard was approved by CENELEC on 2013-01-08. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-056-2:2013 E
Foreword
The text of document 86B/3500/FDIS, future edition 1 of IEC 61753-056-2, prepared by SC 86B, "Fibre
optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-056-2:2013.
The following dates are fixed:
(dop) 2013-10-08
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-01-08
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61753-056-2:2012 was approved by CENELEC as a European
Standard without any modification.
- 3 - EN 61753-056-2:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres
IEC 60869-1 - Fibre optic interconnecting devices and EN 60869-1 -
passive components - Fibre optic passive
power control devices -
Part 1: Generic specification
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components
IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures -
Part 3-32: Examinations and measurements -
Polarisation mode dispersion measurement
for passive optical components
IEC 61753-056-2 ®
Edition 1.0 2012-12
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 056-2: Single mode fibre pigtailed style optical fuse for category C –
Controlled environment
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 33.180.20 ISBN 978-2-83220-515-0
– 2 – 61753-056-2 © IEC:2012(E)
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Tests . 7
4 Test reports . 7
5 Performance requirements . 7
5.1 Sample size, sequencing and grouping. 7
5.2 Dimensions . 7
5.3 Test details and requirements . 8
Annex A (normative) Sample size and product sourcing requirements . 14
Annex B (normative) Power thresholds for optical fuses . 15
Annex C (informative) Example of dimensions for optical fuses . 16
Annex D (normative) Testing of optical fuses . 17
Figure C.1 – Optical fuse, in-line configuration, regularly without connectors . 16
Figure D.1 – Test set-up schematics . 17
Figure D.2 – Example of power threshold and blocking attenuation at threshold
measurements for sample 1280A of an optical fuse . 18
Figure D.3 – Response time curve of an optical fuse. 19
Figure D.4 – Response time testing set-up. 19
Table 1 – Performance requirements for optical fuses . 8
Table A.1 – Sample size and product sourcing requirements . 14
Table B.1 – Powers for optical fuses, single-mode . 15
61753-056-2 © IEC:2012(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 056-2: Single mode fibre pigtailed
style optical fuse for category C –
Controlled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.