EN 61202-1:2009

Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification

IEC 612021-1:2009 applies to isolators used in the field of fibre optics which are non-reciprocal optical devices, passive components and have two optical ports for directionally transmitting optical power. The specific technical changes with regard to the previous edition are: - the definitions have been reconsidered; - environmental category has been deleted from classification; - the clause relating to quality assessment procedures has been deleted; and - annexes A and B have been added.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter-Isolatoren - Teil 1: Fachgrundspezifikation

Dispositifs d'interconnexion et composants passifs à fibres optiques - Isolateurs à fibres optiques - Partie 1: Spécification générique

La CEI 61202-1:2009 s'applique aux isolateurs utilisés dans le domaine des fibres optiques, possédant tous les caractéristiques ce sont des dispositifs optiques non réciproques, ce sont des dispositifs passifs et ont deux ports optiques pour les puissances optiques à émission directionnelle. Les changements techniques particuliers par rapport à l'édition précédente sont les suivants: - les définitions ont été revues; - la catégorie d'environnement a été retirée de la classification; - l'article relatif aux procédures d'évaluation de la qualité a été retirée; et - les Annexes A et B ont été ajoutées.

Optični spojni elementi in pasivne komponente - Optični izolatorji - 1. del: Rodovna specifikacija (IEC 61202-1:2009)

General Information

• Status: Withdrawn
• Publication Date: 15-Sep-2009
• Withdrawal Date: 31-Jul-2010
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 12-Jan-2018
• Completion Date: 12-Jan-2018
• Ref Project: SIST EN 61202-1:2009 - Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2009)

Relations

• Replaces: EN 61202-1:2000 - Fibre optic isolators - Part 1: Generic specification
• Effective Date: 29-Jan-2023
• Replaced By: EN 61202-1:2017 - Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
• Effective Date: 27-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61202-1:2009
01-november-2009
1DGRPHãþD
SIST EN 61202-1:2004
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2SWLþQLL]RODWRUMLGHO
5RGRYQDVSHFLILNDFLMD,(&
Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part
1: Generic specification (IEC 61202-1:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter-
Isolatoren - Teil 1: Fachgrundspezifikation (IEC 61202-1:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Isolateurs à fibres
optiques - Partie 1: Spécification générique (CEI 61202-1:2009)
Ta slovenski standard je istoveten z: EN 61202-1:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61202-1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61202-1:2009

---------------------- Page: 2 ----------------------

SIST EN 61202-1:2009

EUROPEAN STANDARD
EN 61202-1

NORME EUROPÉENNE
September 2009
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61202-1:2000


English version


Fibre optic interconnecting devices
and passive components -
Fibre optic isolators -
Part 1: Generic specification
(IEC 61202-1:2009)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Isolateurs à fibres optiques - und passive Bauteile -
Partie 1: Spécification générique Lichtwellenleiter-Isolatoren -
(CEI 61202-1:2009) Teil 1: Fachgrundspezifikation
(IEC 61202-1:2009)




This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61202-1:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61202-1:2009
EN 61202-1:2009 - 2 -
Foreword
The text of document 86B/2845/FDIS, future edition 3 of IEC 61202-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61202-1 on 2009-08-01.
This European Standard supersedes EN 61202-1:2000.
The specific technical changes with regard to EN 61202-1:2000 are as follows.
– the definitions have been reconsidered;
– environmental category has been deleted from classification;
– the clause relating to quality assessment procedures has been deleted;
– Annexes A and B have been added.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61202-1:2009 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61202-1:2009
- 3 - EN 61202-1:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has
...