EN 61987-15:2017

Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 15: Lists of properties (LOPs) for level measuring equipment for electronic data exchange

IEC 61987-15:2016 provides operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for level measuring equipment, and device lists of properties (DLOPs) for the description of a range of level measuring equipment types.

Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 15: Merkmalleisten (ML) für Füllstandsmessgeräte für den elektronischen Datenaustausch

Mesure et commande des processus industriels - Éléments et structures de données dans les catalogues d’équipements de processus - Partie 15: Listes de propriétés (LOP) pour équipement de mesure de niveau pour l’échange électronique de données

L'IEC 61987-15:2016 fournit une liste de propriétés fonctionnelles (OLOP) pour la description des paramètres fonctionnels et l'ensemble des exigences pour équipement de mesure de niveau, et une liste de propriétés d'appareils (DLOP) pour la description d'une gamme de types d'équipements de mesure de niveau.

Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v katalogih procesne opreme - 15. del: Seznam lastnosti opreme za merjenje nivojev za elektronsko izmenjavo podatkov (IEC 61987-15:2016)

Ta del standarda IEC 61987 zajema:
• operativni seznam lastnosti (OLOP) za opis operativnih parametrov in zbirko zahtev glede opreme za merjenje nivojev ter • sezname lastnosti naprav (DLOP) za opis več vrst opreme za merjenje nivojev.
Strukture operativnega seznama lastnosti in seznamov lastnosti naprav ustrezajo splošnim strukturam, opredeljenim v standardu IEC 61987-11, in so skladne s seznami lastnosti, opredeljenimi v standardu IEC 61987-10.
Vidiki, ki niso povezani z operativnim seznamom lastnosti in so potrebni pri različnih procesih izmenjave podatkov, opisanih v standardu IEC 61987-10, bodo objavljeni v standardu IEC 61987-921.
Mesta knjižnic lastnosti in blokov, ki se uporabljajo v zadevnih seznamih lastnosti, so navedena v dodatkih C in D.

General Information

• Status: Published
• Publication Date: 09-Feb-2017
• Withdrawal Date: 12-Dec-2019
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.20 - Data link layer
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 10-Feb-2017
• Completion Date: 10-Feb-2017
• Ref Project: SIST EN 61987-15:2017 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 15: Lists of properties (LOPs) for level measuring equipment for electronic data exchange (IEC 61987-15:2016)

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2017
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v
katalogih procesne opreme - 15. del: Seznam lastnosti opreme za merjenje nivojev
za elektronsko izmenjavo podatkov (IEC 61987-15:2016)
Industrial-process measurement and control - Data structures and elements in process
equipment catalogues - Part 15: Lists of properties (LOPs) for level measuring
equipment for electronic data exchange (IEC 61987-15:2016)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der
Prozessleittechnik - Teil 15: Merkmalleisten (ML) für Füllstandsmessgeräte für den
elektronischen Datenaustausch (IEC 61987-15:2016)
Mesure et commande des processus industriels - Éléments et structures de données
dans les catalogues d'équipements de processus - Partie 15: Listes de propriétés (LOP)
pour équipement de mesure de niveau pour l'échange électronique de données (IEC
61987-15:2016)
Ta slovenski standard je istoveten z: EN 61987-15:2017
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61987-15

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2017
ICS 25.040.40; 35.100.20
English Version
Industrial-process measurement and control - Data structures
and elements in process equipment catalogues - Part 15: Lists of
properties (LOPs) for level measuring equipment for electronic
data exchange
(IEC 61987-15:2016)
Mesure et commande des processus industriels - Éléments Industrielle Leittechnik - Datenstrukturen und -elemente in
et structures de données dans les catalogues Katalogen der Prozessleittechnik - Teil 15: Merkmalleisten
d'équipements de processus - Partie 15: Listes de (ML) für Füllstandsmessgeräte für den elektronischen
propriétés (LOP) pour équipement de mesure de niveau Datenaustausch
pour l'échange électronique de données (IEC 61987-15:2016)
(IEC 61987-15:2016)
This European Standard was approved by CENELEC on 2016-12-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61987-15:2017 E
European foreword
The text of document 65E/507/FDIS, future edition 1 of IEC 61987-15, prepared by SC 65E “Devices
and integration in enterprise systems” of IEC/TC 65 “Industrial process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2017-09-13
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-12-13
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61987-15:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
1)
IEC 61987-92 NOTE Harmonized as prEN 61987-92 .

1) At draft stage.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61360 series Standard data elements types with EN 61360 series
associated classification scheme for
electric items
IEC 61987-10 2009 Industrial-process measurement and EN 61987-10 2009
control - Data structures and elements in
process equipment catalogues - Part 10:
Lists of Properties (LOPs) for Industrial-
Process Measurement and Control for
Electronic Data Exchange - Fundamentals
- -  + AC 2011
IEC 61987-11 -  Industrial-Process Measurement and - -
Control - Data Structures and Elements in
Process Equipment Catalogues. Part 11:
List of Properties (LOP) of measuring
equipment for electronic data exchange -
generic structures
IEC 61987-15 ®
Edition 1.0 2016-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial-process measurement and control – Data structures and elements in

process equipment catalogues –

Part 15: Lists of properties (LOPs) for level measuring equipment for electronic

data exchange
Mesure et commande des processus industriels – Éléments et structures de

données dans les catalogues d’équipements de processus –

Partie 15: Listes de propriétés (LOP) pour équipement de mesure de niveau

pour l’échange électronique de données

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.20 ISBN 978-2-8322-3718-2

– 2 – IEC 61987-15:2016 © IEC 2016
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
3.1 General . 8
3.2 Level terms . 8
4 General . 8
4.1 Overview. 8
4.2 Special considerations . 8
4.3 Depiction of OLOP and DLOPs . 10
4.4 Example of DLOP block usage . 11
4.4.1 General specification of a free-space radar level transmitter . 11
4.4.2 General specification of a vibration level switch . 17
Annex A (normative) Operating list of properties for level measuring equipment . 20
Annex B (normative) Device lists of properties for level measuring equipment . 21
B.1 Level indicators . 21
B.1.1 Sight level indicator . 21
B.2 Level gauges . 21
B.2.1 Magnetic level gauge . 21
B.2.2 Sight level gauge . 21
B.3 Level switches . 21
B.3.1 Level switch . 21
B.3.2 Capacitance level switch . 22
B.3.3 Conductance level switch . 22
B.3.4 Displacer level switch . 22
B.3.5 Float level switch . 22
B.3.6 Guided-wave radar level switch . 22
B.3.7 Microwave level switch . 23
B.3.8 Nuclear level switch . 23
B.3.9 Optical level switch . 23
B.3.10 Rotary paddle switch . 23
B.3.11 Thermal level switch . 23
B.3.12 Vibrating level switch . 24
B.3.13 Ultrasonic level switch . 24
B.4 Level transmitters . 24
B.4.1 Level transmitter . 24
B.4.2 Capacitance level transmitter . 24
B.4.3 Conductance level transmitter. 25
B.4.4 Displacer level transmitter . 25
B.4.5 Free-space radar level transmitter . 25
B.4.6 Float level transmitter . 25
B.4.7 Guided-wave radar level transmitter . 25
B.4.8 Hydrostatic pressure level transmitter . 26
B.4.9 Laser level transmitter . 26
B.4.10 Plumb bob level transmitter . 26

IEC 61987-15:2016 © IEC 2016 – 3 –
B.4.11 Nuclear level transmitter . 26
B.4.12 Servo level transmitter . 26
B.4.13 Ultrasonic level transmitter . 27
B.5 Components . 27
B.5.1 Bypass/measuring chamber . 27
B.5.2 Separate level transmitter/switching unit . 27
B.5.3 Stilling well . 27
B.5.4 Window . 27
Annex C (normative) Property library . 28
Annex D (normative) Block library for considered
...