FprEN IEC 60051-9:2018
(Main)Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods
IEC 60051-9:2019 applies to direct acting indicating analogue electrical measuring instruments and their accessories and gives guidance for applicable test methods and for the performance of test equipment. This document does not apply to: – special purpose instruments that are covered by their own IEC International Standards; – special purpose devices that are covered by their own IEC International Standards when they are used as accessories. IEC 60051-9:2018 cancels and replaces the fourth edition published in 1988, Amendment 1:1994 and Amendment 2:1995. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) adding performance requirements for test equipment; b) updating the references to the applicable standards for test methods.
Direkt wirkende anzeigende elektrische Meßgeräte und ihr Zubehör - Meßgeräte mit Skalenanzeige - Teil 9: Empfohlene Prüfverfahren
Appareils de mesure électriques indicateurs analogiques à action directe et leurs accessoires - Partie 9 : Méthodes d'essai recommandées
IEC 60051-9:2019 s'applique aux appareils de mesure électriques indicateurs analogiques à action directe et à leurs accessoires, et fournit des recommandations pour les méthodes d'essai applicables ainsi que pour les performances de l'équipement d'essai. Ce document ne s'applique pas aux: – appareils spéciaux couverts par leurs propres Normes internationales IEC; – dispositifs spéciaux couverts par leurs propres Normes internationales IEC, lorsqu'ils sont utilisés en tant qu'accessoires. IEC 60051-9:2018 annule et remplace la quatrième édition parue en 1988, son Amendement 1:1994 et son Amendement 2:1995. Cette édition constitue une révision technique. La présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) ajout d'exigences de performance pour l'équipement d'essai; b) mise à jour des références aux normes de méthodes d'essai applicables.
Neposredni kazalni analogni električni merilni instrumenti in njihov pribor - 9. del: Priporočene preskusne metode
General Information
RELATIONS
Standards Content (sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Direkt wirkende anzeigende elektrische Meßgeräte und ihr Zubehör - Meßgeräte mit Skalenanzeige - Teil 9: Empfohlene PrüfverfahrenAppareils mesureurs électriques indicateurs analogiques à action directe et leurs accessoires - Partie 9: Méthodes d'essai recommandéesDirect acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods17.220.20Measurement of electrical and magnetic quantitiesICS:Ta slovenski standard je istoveten z:prEN 60051-9:2018oSIST prEN 60051-9:2018en,fr,de01-april-2018oSIST prEN 60051-9:2018SLOVENSKI
STANDARDoSIST prEN 60051-9:2018
85/620/CDV COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER: IEC 60051-9 ED5
DATE OF CIRCULATION: CLOSING DATE FOR VOTING: 2018-01-26 2018-04-20
SUPERSEDES DOCUMENTS: 85/577/CD,85/618/CC
IEC TC 85 : MEASURING EQUIPMENT FOR ELECTRICAL AND ELECTROMAGNETIC QUANTITIES SECRETARIAT: SECRETARY: China Mr Bo Chen OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in this CDV to the secretary. FUNCTIONS CONCERNED:
EMCENVIRONMENT
QUALITY ASSURANCE
SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC, is drawn to the fact that this Committee Draft for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC online voting system.
NOT SUBMITTED FOR CENELEC PARALLEL VOTINGThis document is still under study and subject to change. It should not be used for reference purposes. Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
TITLE: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9: Recommended test methods
PROPOSED STABILITY DATE: 2020NOTE FROM TC/SC OFFICERS:
Copyright © 2018 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in writing from IEC.
oSIST prEN 60051-9:2018IEC CDV 60051-9 © IEC: 2018 -2- 85/620/CDV
CONTENTS 1
2 FOREWORD .......................................................................................................................... 3 3 INTRODUCTION .................................................................................................................... 5 4 1 Scope ............................................................................................................................. 6 5 2 Normative references ...................................................................................................... 6 6 3 Terms and definitions ...................................................................................................... 6 7 4 Requirements for test equipment .................................................................................... 7 8 4.1 General .................................................................................................................. 7 9 4.2 Test equipment for measuring the intrinsic uncertainty of the measurand and its 10 variations ............................................................................................................... 7 11 4.3 Test equipment for overload tests, self-heating, damping, overshoot and response 12 time ........................................................................................................................ 7 13 4.4 Test equipment for phase shift ............................................................................... 7 14 4.5 Test equipment for temperatures ............................................................................ 7 15 4.6 Test equipment for humidity ................................................................................... 7 16 5 Test methods for determination of intrinsic uncertainty .................................................... 7 17 6 Test methods for damping ............................................................................................... 7 18 7 Test methods for humidity ............................................................................................... 8 19 8 Tests with distorted ac. quantities ................................................................................... 8 20 9
Test methods for shock and vibration .............................................................................. 8 21 10
Test methods for external magnetic field ........................................................................ 8 22 11
Test methods for external electric field ........................................................................... 8 23 12
Test methods for electrical safety ................................................................................... 8 24 13
Test methods for electromagnetic compatibility (EMC) ................................................... 8 25
27 oSIST prEN 60051-9:2018IEC CDV 60051-9 © IEC: 2018 -3- 85/620/RVC
28 INTERNATIONAL ELECTROTECHNICAL COMMISSION 29 ____________ 30
31 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING 32 INSTRUMENTS AND THEIR ACCESSORIES – 33
Part 9: Recommended test methods37 FOREWORD 38 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all 39 national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-40 operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to 41 other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available 42 Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical 43 committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. 44 International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. 45 IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions 46 determined by agreement between the two organizations. 47 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international 48 consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC 49 National Committees.
50 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees 51 in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, 52 IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 53 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently 54 to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication 55 and the corresponding national or regional publication shall be clearly indicated in the latter. 56 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment 57 services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by 58 independent certification bodies. 59 6) All users should ensure that they have the latest edition of this publication. 60 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of 61 its technical committees and IEC National Committees for any personal injury, property damage or other damage of any 62 nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the 63 publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
64 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is 65 indispensable for the correct application of this publication. 66 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. 67 IEC shall not be held responsible for identifying any or all such patent rights. 68 International Standard IEC 60051-9 has been prepared by IEC technical committee 85: Measuring 69 equipment f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.