01.040.17 - Metrology and measurement. Physical phenomena (Vocabularies)
ICS 01.040.17 Details
Metrology and measurement. Physical phenomena (Vocabularies)
Metrologie. Me?wesen. Angewandte Physik (Begriffe)
Métrologie et mesurage. Phénomenes physiques (Vocabulaires)
Meroslovje in merjenje. Fizikalni pojavi (Slovarji)
General Information
- Standard3 pagesEnglish and French languagesale 15% off
- Standard4 pagesEnglish and French languagesale 15% off
IEC 62742:2021 specifies minimum requirements for emission, immunity and performance criteria regarding electromagnetic compatibility (EMC) of electrical and electronic equipment for ships with non-metallic hull.
NOTE Requirements for metallic hull are given by IEC 60533. This documents acts an extension of IEC 60533 to cater for EMC effects on non-metallic hull.
This document further gives guidance on how to achieve electromagnetic compatibility (EMC) on ships whose hull (surface) is made from non-metallic material and can also be useful for ships with hull comprising of a metallic hull, but with non-metallic superstructure or components.
This document assists in meeting the requirements of IMO resolution A.813(19).
It does not specify basic safety requirements such as protection against electric shock and dielectric tests for equipment. Electromagnetic effects on human beings are not the subject of this document.
- Standard28 pagesEnglish languagesale 15% off
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard14 pagesEnglish and French languagesale 15% off
- Standard6 pagesEnglish and French languagesale 15% off
- Standard3 pagesEnglish and French languagesale 15% off
- Standard49 pagesEnglish and French languagesale 15% off
- Standard10 pagesEnglish and French languagesale 15% off
- Standard3 pagesEnglish and French languagesale 15% off
- Standard2 pagesEnglish and French languagesale 15% off
- Standard3 pagesEnglish and French languagesale 15% off
- Standard2 pagesEnglish and French languagesale 15% off
IEC 60050-192:2015 gives the general terminology used in the field of dependability. The terms are generic and are applicable to all fields of dependability methodology, including electrotechnical applications. The document is not an exhaustive vocabulary for all IEC standards in the dependability field: definitions for some specialized terms may only be found in the relevant standards. This document replaces sections 1 to 20 of IEC 60050-191:1990, which has been subjected to a systematic, in-depth review and revision, in order to reflect the current usage of the terms in the dependability field, to introduce new terms from new or revised standards, and other informed sources, and to provide a grammatical form, and presentation to comply with the IEC directives. It has the status of a horizontal standard in accordance with IEC Guide 108:2006. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
- Standard252 pagesEnglish and French languagesale 10% offe-Library read for1 day
This part of ISO 25178 deals with geometrical defects that may be present on the surfaces of material measures and calibration specimens conforming to ISO 5436-1 and ISO 25178-70. It defines classes of these geometrical defects, and defines terms for ways of responding to these defects.
This part of ISO 25178 is applicable as follows:
a) to help customers and users of material measures for surface metrology specify their nominal features (ideal geometrical properties) when purchasing them from manufacturers and suppliers;
b) to enable users of material measures to formulate their own rules and policies for responding to the occurrence of defects in such a way as to minimise the uncertainty of their own measurements.
c) to enable calibration laboratories and their customers to agree a common policy on how to treat defects on a material measure that has been sent for calibration;
d) to educate users of material measures about the different significance and importance of different kinds of defect;
e) for other GPS standards which make reference to the issue of selection of measuring locations, or selection of areas to be measured or to be avoided in measurement.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines classes of geometrical defects that might be present on the surfaces of material measures and calibration specimens conforming to ISO 5436-1 and ISO 25178-70, and defines terms for ways of responding to these defects.
This document is applicable as follows:
a) to help customers and users of material measures for surface metrology specify their nominal features (ideal geometrical properties) when obtaining them from manufacturers and suppliers;
b) to enable users of material measures to formulate their own rules and policies for responding to the occurrence of defects in such a way as to minimize the uncertainty of their own measurements;
NOTE Such policies are required in ISO/IEC 17025:2017, 7.2.1.1, 7.2.1.3, 7.3.1 and 7.8.5 c) and d), for example.
c) to enable calibration laboratories and their customers to agree on a common policy on how to treat defects on a material measure that has been sent for calibration;
d) to educate users of material measures about the different significance and importance of different kinds of defect;
e) for other GPS standards which make reference to the issue of selection of measuring locations, or selection of areas to be measured or avoided in measurement.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines classes of geometrical defects that might be present on the surfaces of material measures and calibration specimens conforming to ISO 5436-1 and ISO 25178-70, and defines terms for ways of responding to these defects. This document is applicable as follows: a) to help customers and users of material measures for surface metrology specify their nominal features (ideal geometrical properties) when obtaining them from manufacturers and suppliers; b) to enable users of material measures to formulate their own rules and policies for responding to the occurrence of defects in such a way as to minimize the uncertainty of their own measurements; NOTE Such policies are required in ISO/IEC 17025:2017, 7.2.1.1, 7.2.1.3, 7.3.1 and 7.8.5 c) and d), for example. c) to enable calibration laboratories and their customers to agree on a common policy on how to treat defects on a material measure that has been sent for calibration; d) to educate users of material measures about the different significance and importance of different kinds of defect; e) for other GPS standards which make reference to the issue of selection of measuring locations, or selection of areas to be measured or avoided in measurement.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
- Standard2 pagesEnglish and French languagesale 15% off
This document defines terms relating to rotating machinery equipped with active magnetic bearings. NOTE General terms and definitions of mechanical vibration are given in ISO 2041; those relating to balancing are given in ISO 21940-2; those relating to geometric characteristics such as coaxiality, concentricity and runout are explained in ISO 1101.
- Standard22 pagesEnglish languagesale 15% off
This document defines terms and expressions unique to the areas of mechanical vibration, shock and condition monitoring.
- Standard56 pagesEnglish languagesale 15% off
- Standard57 pagesFrench languagesale 15% off
IEC 62933-1:2018 defines terms applicable to electrical energy storage (EES) systems including terms necessary for the definition of unit parameters, test methods, planning, installation, safety and environmental issues. This terminology document is applicable to grid-connected systems able to extract electrical energy from an electric power system, store it internally, and inject electrical power to an electric power system. The step for charging and discharging an EES system may comprise an energy conversion.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61970-302:2018 specifies a Dynamics package which contains extensions to the CIM to support the exchange of models between software applications that perform analysis of the steady-state stability (small-signal stability) or transient stability of a power system as defined by IEEE/CIGRE Definition and classification of power system stability IEEE/CIGRE joint task force on stability terms and definitions. The model descriptions in this standard provide specifications for each type of dynamic model as well as the information that needs to be included in dynamic case exchanges between planning/study applications.
- Standard987 pagesEnglish and French languagesale 15% off
IEC 62933-1:2018 defines terms applicable to electrical energy storage (EES) systems including terms necessary for the definition of unit parameters, test methods, planning, installation, safety and environmental issues.
This terminology document is applicable to grid-connected systems able to extract electrical energy from an electric power system, store it internally, and inject electrical power to an electric power system. The step for charging and discharging an EES system may comprise an energy conversion.
- Standard69 pagesEnglish and French languagesale 15% off
This part of IEC 60051 specifies definitions and general requirements for direct acting
indicating analogue electrical measuring instruments and their accessories.
This part applies to direct acting indicating analogue electrical measuring instruments, such
as:
• ammeters and voltmeters;
• wattmeters and varmeters;
• frequency meters of pointer and vibrating-reed types;
• phasemeters, power-factor meters and synchroscopes;
• ohmmeters(impedance meters) and conductance meters;
• multi-function instruments of the above types.
It also applies to:
• certain accessories used with these instruments, such as:
– shunts;
– series resistors and impedance elements;
• combination of the instruments and the accessories provided that the adjustments have
been made for the combination;
• direct acting indicating electrical measuring instrument whose scale marks do not
correspond directly to its electrical input quantity, provided that the relationship between
them is known;
• instruments and accessories having electronic devices in their measuring and/or auxiliary
circuits.
These series standards do not apply to:
• special purpose instruments which are covered by their own IEC standards;
• special purpose devices which are covered by their own IEC standards when they are
used as accessories.
This standard does not specify requirements concerning dimensions of instruments or
accessories (for the former, see IEC 60473).
- Standard60 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 9849:2017 defines terms relating to geodetic field instruments only, e.g. distance meters, levels, theodolites and others, and their essential component parts which are normally used in terrestrial measuring operations of ordnance survey, topographic survey, plane survey and engineering survey. Therefore, terms concerning fields such as the following are not mentioned, for example, photogrammetry, astronomy, hydrographic survey and industrial metrology. Accessories which are not necessary for the functioning of the instruments are not dealt with. The terms are arranged in English alphabetical order.
- Standard21 pagesEnglish languagesale 15% off
ISO 18405:2017 defines terms and expressions used in the field of underwater acoustics, including natural, biological and anthropogenic (i.e. man-made) sound. It includes the generation, propagation and reception of underwater sound and its scattering, including reflection, in the underwater environment including the seabed (or sea bottom), sea surface and biological organisms. It also includes all aspects of the effects of underwater sound on the underwater environment, humans and aquatic life. The properties of underwater acoustical systems are excluded.
- Standard51 pagesEnglish languagesale 15% off
IEC TR 61916:2017(E) provides guidance on requirements and tests for subjects applicable to electrical accessories that are within the scope of IEC TC 23 and its subcommittees.
This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) clarification of the introduction and the scope;
b) clarification of subclause 6.3;
c) modification of Clause 7;
d) modification of Clause 10;
e) addition of Annex B for temperature selection for GWEPT.
- Technical report34 pagesEnglish languagesale 15% off
- Amendment3 pagesEnglish and French languagesale 10% offe-Library read for1 day
- Standard2 pagesEnglish and French languagesale 15% off
- Amendment3 pagesEnglish and French languagesale 10% offe-Library read for1 day
- Standard2 pagesEnglish and French languagesale 15% off
- Amendment3 pagesEnglish and French languagesale 10% offe-Library read for1 day
Applies to any software forming part of a safety-related system or used to develop a safety-related system within the scope of IEC 61508-1 and IEC 61508-2. Provides requirements: - for safety lifecycle phases and actvities; - for informatin relating to the software safety validation; - for the preparation of information and procedures concerning software; - to be met by the organisation carrying out modifications to safety-related software; - for supporting tools. Has the status of a basic safety publication in accordance with IEC Guide 104.[
]The contents of the corrigendum of April 1999 have been included in this copy.
- Standard2 pagesEnglish and French languagesale 15% off
IEC 61377:2016 applies to the traction system consisting of traction motor(s), converter(s), traction control equipment including software, transformer, input filters, brake resistors, main circuit-breaker, cooling equipment, transducers, contactors, etc. Types of motors applicable in this standard are asynchronous, or synchronous including permanent magnet (PMM), or direct current (DC). The objective of this standard is to specify the type test of a traction system, mainly comprising of:
- test of performance characteristics;
- test methods of verifying these performance characteristics. This new edition includes the following main technical changes with regard to the previous editions: it includes updates as necessary in order to meet the current technical state of the art, to improve clarity and to create an edition that considers all types of motors part of a traction system.
- Standard97 pagesEnglish and French languagesale 15% off
- Standard173 pagesEnglish, French and Russian languagesale 10% offe-Library read for1 day
IEC 60050-192:2015 gives the general terminology used in the field of dependability. The terms are generic and are applicable to all fields of dependability methodology, including electrotechnical applications. The document is not an exhaustive vocabulary for all IEC standards in the dependability field: definitions for some specialized terms may only be found in the relevant standards. This document replaces sections 1 to 20 of IEC 60050-191:1990, which has been subjected to a systematic, in-depth review and revision, in order to reflect the current usage of the terms in the dependability field, to introduce new terms from new or revised standards, and other informed sources, and to provide a grammatical form, and presentation to comply with the IEC directives. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.
- Standard239 pagesEnglish and French languagesale 15% off
IEC 60050-300 vsebuje splošne izraze povezane z meritvami, električnimi meritvami in izraze, povezane s tipom instrumenta. V teh delih mednarodnega slovarja so izrazi in definicije podani v francoskem in angleškem jeziku, poleg teh pa so navedeni tudi izrazi v kitajskem (cn), nemškem (de), španskem (es), japonskem (ja), poljskem (pl), portugalskem (pt) in švedskem(sv) jeziku.
- Standard247 pagesEnglish and French languagesale 10% offe-Library read for1 day
- Standard – translation92 pagesSlovenian languagesale 10% offe-Library read for1 day
Specifies the basic dimensions for cylindrical barrelled delivery spools with conical flanges for winding wires.
- Standard2 pagesEnglish and French languagesale 15% off
This European Standard defines the measurement conditions for surface roughness parameters of metallic flat products, both uncoated (cold and hot rolled pickled steel) and coated with metallic coatings (e.g. zinc, aluminium, tin, chromium) (see 3.1).
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard34 pagesEnglish and French languagesale 15% off
This International Standard provides definitions of terms pertaining to transitions, pulses, and related waveforms and provides definitions and descriptions of techniques and procedures for measuring their parameters. The waveforms considered in this standard are those that make a number of transitions and that remain relatively constant in the time intervals between transitions. Signals and their waveforms for which this standard apply include but are not limited to those used in: digital communications, data communications, and computing; studies of transient biological, cosmological, and physical events; and electrical, chemical, and thermal pulses encountered and used in a variety of industrial, commercial, and consumer applications. This standard does not apply to sinusoidally-varying or other continuously-varying signals and their waveforms. The object of this standard is to facilitate accurate and precise communication concerning parameters of transitions, pulses, and related waveforms and the techniques and procedures for measuring them.
- Standard66 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60469:2013 provides definitions of terms pertaining to transitions, pulses, and related waveforms and provides definitions and descriptions of techniques and procedures for measuring their parameters. The waveforms considered in this standard are those that make a number of transitions and that remain relatively constant in the time intervals between transitions. Signals and their waveforms for which this standard apply include but are not limited to those used in: - digital communications, data communications, and computing; - studies of transient biological, cosmological, and physical events; - and electrical, chemical, and thermal pulses encountered and used in a variety of industrial, commercial, and consumer applications. This standard does not apply to sinusoidally-varying or other continuously-varying signals and their waveforms. The object of this standard is to facilitate accurate and precise communication concerning parameters of transitions, pulses, and related waveforms and the techniques and procedures for measuring them. IEC 60469:2013 combine the contents of IEC 60469-1 and IEC 60469-2. IEC 60469-1 dealt with terms and definitions for describing waveform parameters and IEC 60469-2 described the waveform measurement process. Other technical revisions include updating of terminology, errors correction, algorithms addition for computing values of pulse parameters, and addition of a newly-developed method for computing state levels. Changes to the definitions include adding new terms and definitions, deleting unused terms and definitions, expanding the list of deprecated terms, and updating and modifying existing definitions.
- Standard66 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60469:2013 provides definitions of terms pertaining to transitions, pulses, and related waveforms and provides definitions and descriptions of techniques and procedures for measuring their parameters. The waveforms considered in this standard are those that make a number of transitions and that remain relatively constant in the time intervals between transitions. Signals and their waveforms for which this standard apply include but are not limited to those used in:
- digital communications, data communications, and computing;
- studies of transient biological, cosmological, and physical events;
- and electrical, chemical, and thermal pulses encountered and used in a variety of industrial, commercial, and consumer applications. This standard does not apply to sinusoidally-varying or other continuously-varying signals and their waveforms. The object of this standard is to facilitate accurate and precise communication concerning parameters of transitions, pulses, and related waveforms and the techniques and procedures for measuring them. IEC 60469:2013 combine the contents of IEC 60469-1 and IEC 60469-2. IEC 60469-1 dealt with terms and definitions for describing waveform parameters and IEC 60469-2 described the waveform measurement process. Other technical revisions include updating of terminology, errors correction, algorithms addition for computing values of pulse parameters, and addition of a newly-developed method for computing state levels. Changes to the definitions include adding new terms and definitions, deleting unused terms and definitions, expanding the list of deprecated terms, and updating and modifying existing definitions.
- Standard132 pagesEnglish and French languagesale 15% off
1 Scope
This part of ISO 17450 defines terms related to specifications, operators (and operations) and uncertainties used in geometrical product specifications (GPS) standards. It presents the basic tenets of the GPS philosophy while discussing the impact of uncertainty on those tenets, and examines the processes of specification and verification as they apply to GPS.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
ISO/IEC Guide 99:2007 provides a set of definitions and associated terms, in English and French, for a system of basic and general concepts used in metrology, together with concept diagrams to demonstrate their relations. Additional information is given in the form of examples and notes under many definitions.
This Vocabulary is meant to be a common reference for scientists and engineers, as well as teachers and practitioners, involved in planning or performing measurements, irrespective of the level of measurement uncertainty and irrespective of the field of application. It is also meant to be a reference for governmental and inter-governmental bodies, trade associations, accredi�tation bodies, regulators and professional societies.
- Guide106 pagesEnglish and French languagesale 10% offe-Library read for1 day
- Guide – translation197 pagesSlovenian, English and French languagesale 10% offe-Library read for1 day
This part of ISO 12781 specifies the complete specification operator for flatness of complete integral features
only, i.e. geometrical characteristics of individual features of type plane.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO/TS 12781 defines the terms and concepts related to flatness of individual complete integral features only.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO/TS 12180 defines the terms and concepts related to cylindricity of individual complete integral features only.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO/TS 12181 defines the terms and concepts related to the roundness of individual integral features and covers complete roundness profiles only.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO/TS 12780 defines the terms and concepts related to straightness of individual integral features and covers complete straightness profiles only. NOTE Straightness of an extracted derived axis of a cylinder is defined in ISO/TS 12180-1 and ISO/TS 12180-2.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 772:2011 gives terms, definitions and symbols used in standards in the field of hydrometry.
- Standard164 pagesEnglish and French languagesale 10% offe-Library read for1 day