EN 61753-089-2:2013
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
IEC 61753-089-2:2013(E) contains the minimum initial performance, test and measurement requirements and severities which a fibre optic pigtailed wide wavelength division multiplexing (WWDM) device for monitoring passive optical networks (PON) using an optical time-domain reflectometer (OTDR) satisfies in order to be categorized as meeting the requirements of category C (controlled environments), as defined in Annex A of IEC 61753-1:2007. Annex B of this standard provides information concerning the principle and function of the OTDR monitoring WWDM. Keywords: wide wavelength division multiplexing (WWDM), passive optical networks (PON), optical time-domain reflectometer (OTDR)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 089-2: Nicht mit Steckverbindern versehene bidirektionale OTDR-Überwachungs-WWDM-Bauteile für die Kategorie C - Kontrollierte Umgebung
Dispositifs d’interconnexion et composants passifs à fibres optiques – Norme de performance – Partie 089-2: Dispositifs WWDM de contrôle de type OTDR, bidirectionnels, unimodaux, non connectorisés pour la catégorie C – Environnement contrôlé
L'IEC 61753-089-2:2013 contient les sévérités et les exigences minimales initiales de performances, d'essais et de mesures auxquelles répond un dispositif à répartition en longueur d'onde large (WWDM) muni de fibres amorces, pour contrôler des réseaux optiques passifs (PON) à l'aide d'un réflectomètre optique (OTDR) afin d'être classé comme conforme aux exigences de la catégorie C (environnements contrôlés), comme défini à l'Annexe A de l'IEC 61753-1:2007. L'Annexe B de la présente norme fournit des informations sur le principe et le fonctionnement d'un dispositif WWDM de contrôle OTDR. Mots clés: dispositif en longueur d'onde large (WWDM), réseaux optiques passifs (PON) à l'aide d'un réflectomètre optique (OTDR)
Optični spojni elementi in pasivne komponente - Tehnični standard - 089-2. del: Enorodne dvosmerne OTDR nadzorne naprave WWDM brez konektorjev za kategorijo C - Nadzorovano okolje
Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za delovanje, preskuse in meritve, ki jih mora svitkasta naprava iz optičnih vlaken za širokopasovni valovni multipleks (WWDM) za spremljanje pasivnih optičnih omrežij (PON) z optičnim reflektometrom (OTDR) izpolnjevati, da izpolnjuje zahteve kategorije C (nadzorovano okolje), kakor je določeno v dodatku A standarda IEC 61753-1:2007. Dodatek B tega standarda podaja informacije glede načela in funkcije OTDR za spremljanje WWDM.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2013
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUG GHO
(QRURGQHGYRVPHUQH27'5QDG]RUQHQDSUDYH::'0EUH]NRQHNWRUMHY]D
NDWHJRULMR&1DG]RURYDQRRNROMH
Fibre optic interconnecting devices and passive components - Performance standard -
Part 089-2: Non-connectorised single-mode bidirectional OTDR monitoring WWDM
devices for Category C - Controlled environment
Ta slovenski standard je istoveten z: EN 61753-089-2:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61753-089-2
NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 089-2: Non-connectorized single-mode bidirectional OTDR
monitoring WWDM devices for category C -
Controlled environment
(IEC 61753-089-2:2013)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile -
Partie 089-2: Dispositifs WWDM de Betriebsverhalten -
surveillance par OTDR, unimodaux non Teil 089-2: Nicht mit Steckverbindern
connectorisés bidirectionnels pour la versehene bidirektionale OTDR-
catégorie C - Environnement contrôlé Überwachungs-WWDM-Bauteile für die
(CEI 61753-089-2:2013) Kategorie C -
kontrollierte Umgebung
(IEC 61753-089-2:2013)
This European Standard was approved by CENELEC on 2013-04-10. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-089-2:2013 E
Foreword
The text of document 86B/3454/CDV, future edition 1 of IEC 61753-089-2, prepared by SC 86B "Fibre
optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-089-2:2013.
The following dates are fixed:
(dop) 2014-01-10
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-04-10
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-089-2:2013 was approved by CENELEC as a
European Standard without any modification.
- 3 - EN 61753-089-2:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High
temperature endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2-19: Tests
- Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
Publication Year Title EN/HD Year
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief
of fibre optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components
IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures -
Part 3-20: Examinations and measurements
- Directivity of fibre optic branching devices
IEC 61753-1 2007 Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance standard -
Part 1: General and guidance for
performance standards
IEC 61753-089-2 ®
Edition 1.0 2013-03
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring
WWDM devices for category C – Controlled environment
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
P
ICS 33.180.20 ISBN 978-2-83220-651-5
– 2 – 61753-089-2 IEC:2013(E)
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test . 6
5 Test report . 7
6 Performance requirements . 7
6.1 Reference components . 7
6.2 Dimensions . 7
6.3 Sample size . 7
6.4 Test details and requirements . 7
Annex A (normative) Sample size . 12
Annex B (Informative) General information for OTDR monitoring WWDM device . 13
Bibliography . 15
Figure B.1 – Functional principle of a monitoring WWDM device . 13
Figure B.2 – Example for the integration of the OTDR monitoring WWDM at central
office and customer side . 14
Table 1 – Test details and requirements (1 of 5) . 7
Table A.1 – Sample size . 12
61753-089-2 IEC:2013(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 089-2: Non-connectorized single-mode bidirectional
OTDR monitoring WWDM devices for category C –
Controlled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attentio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.