EN 50588-3:2018

Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 3: Transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on transformers meeting the requirements of EN 50588-2

This European Standard specifies the requirements for cable boxes, Type 1, in which the cable cores are terminated. The cable boxes are suitable for use on transformers defined in EN 50588-2, "Transformers with Cable Boxes", for side mounted or cover mounted use. The cable boxes are suitable for operation indoors and outdoors under environmental conditions specified in EN 50588-1. Important design and construction requirements of the cable boxes are given.

Mittelleistungstransformatoren 50 Hz, mit einer höchsten Spannung für Betriebsmittel nicht über 36 kV - Teil 3: Verteiltransformatoren mit Kabelanschlusskästen auf der Ober- und/oder Unterspannungsseite - Kabelanschlusskästen Typ 1 für Verteiltransformatoren nach EN 50588-2

Diese Norm legt die Anforderungen für Kabelanschlusskästen des Typs 1 fest, in denen die Kabeladern abgeschlossen sind. Die Kabelanschlusskästen sind für den Einsatz an Transformatoren geeignet, wie sie in EN 50588-2 "Transformatoren mit Kabelanschlusskästen" für Seitenwandanordnung oder Deckelanordnung definiert sind. Die Kabelanschlusskästen sind für den Innenraum- und Freilufteinsatz unter den in EN 50588-1 festgelegten Umweltbedingungen geeignet. Wichtige Anforderungen für Konstruktion und Bauweise von Kabelanschlusskästen werden angegeben.

Transformateurs 50 Hz de moyenne puissance, de tension la plus élevée pour le matériel ne dépassant pas 36 kV - Partie 3: Transformateurs raccordés par boîtes à câble côté haute tension et/ou côté basse tension - Boîtes à câbles de type 1 pour utilisation pour transformateurs conformes aux exigences de la EN 50588-2

La présente Norme européenne spécifie les exigences relatives aux boîtes à câbles de Type 1, dans lesquelles se terminent les âmes de câble. Les boîtes à câbles sont adaptées à une utilisation sur les transformateurs définis dans l'EN 50588-2, "Transformateurs avec boîtes à câbles", à montage latéral ou sur le couvercle. Les boîtes à câbles sont adaptées à une utilisation intérieure et extérieure dans les conditions d'environnement spécifiées dans l'EN 50588-1. Des exigences importantes en matière de conception et de construction des boîtes à câbles sont données.

Močnostni transformatorji srednje moči 50 Hz z najvišjo napetostjo naprave do 36 kV - 3. del: Transformatorji s kabelskimi ohišji na visokonapetostni oziroma nizkonapetostni strani - Kabelska ohišja tipa 1 za transformatorje, ki izpolnjujejo zahteve standarda EN 50588-2

Ta evropski standard določa zahteve za kabelske omarice tipa 1, v katerih se kabelske žile končajo. Kabelske omarice so primerne za uporabo v transformatorjih, določenih v EN 50588-2, »Transformatorji s kabelskimi omaricami«, za namestitev ob strani ali na pokrov. Kabelske omarice so primerne za uporabo znotraj in zunaj pod okoljskimi pogoji, določenimi v standardu EN 50588-1.
Navedene so pomembne zahteve za projektiranje in konstrukcijo kabelskih omaric.

General Information

• Status: Withdrawn
• Publication Date: 15-Mar-2018
• Withdrawal Date: 24-Dec-2020
• ICS: 29.180 - Transformers. Reactors
• Technical Committee: CLC/TC 14 - Power transformers
• Drafting Committee: CLC/TC 14 - Power transformers
• Ref Project: SIST EN 50588-3:2018 - Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 3: Transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on transformers meeting the requirements of EN 50588-2

Relations

• Replaces: EN 50464-2-2:2007 - Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1
• Effective Date: 20-Mar-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2018
1DGRPHãþD
SIST EN 50464-2-2:2007
0RþQRVWQLWUDQVIRUPDWRUMLVUHGQMHPRþL+]]QDMYLãMRQDSHWRVWMRQDSUDYHGR
N9GHO7UDQVIRUPDWRUMLVNDEHOVNLPLRKLãMLQDYLVRNRQDSHWRVWQLR]LURPD
QL]NRQDSHWRVWQLVWUDQL.DEHOVNDRKLãMDWLSD]DWUDQVIRUPDWRUMHNLL]SROQMXMHMR
]DKWHYHVWDQGDUGD(1
Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36
kV - Part 3: Transformers with cable boxes on the high-voltage and/or low-voltage side -
Cable boxes type 1 for use on transformers meeting the requirements of EN 50588-2
Mittelleistungstransformatoren 50 Hz, mit einer höchsten Spannung für Betriebsmittel
nicht über 36 kV - Teil 3: Verteiltransformatoren mit Kabelanschlusskästen auf der Ober-
und/oder Unterspannungsseite - Kabelanschlusskästen Typ 1 für Verteiltransformatoren
nach EN 50588-2
Transformateurs 50 Hz de moyenne puissance, de tension la plus élevée pour le
matériel ne dépassant pas 36 kV - Partie 3: Transformateurs raccordés par boîtes à
câble côté haute tension et/ou côté basse tension - Boîtes à câbles de type 1 pour
utilisation pour transformateurs conformes aux exigences de la EN 50588-2
Ta slovenski standard je istoveten z: EN 50588-3:2018
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 50588-3
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2018
ICS 29.180 Supersedes EN 50464-2-2:2007
English Version
Medium power transformers 50 Hz, with highest voltage for
equipment not exceeding 36 kV - Part 3: Transformers with
cable boxes on the high-voltage and/or low-voltage side - Cable
boxes type 1 for use on transformers meeting the requirements
of EN 50588-2
Transformateurs 50 Hz de moyenne puissance, de tension Mittelleistungstransformatoren 50 Hz, mit einer höchsten
la plus élevée pour le matériel ne dépassant pas 36 kV - Spannung für Betriebsmittel nicht über 36 kV - Teil 3:
Partie 3: Transformateurs raccordés par boîtes à câble côté Verteiltransformatoren mit Kabelanschlusskästen auf der
haute tension et/ou côté basse tension - Boîtes à câbles de Ober- und/oder Unterspannungsseite -
type 1 pour utilisation pour transformateurs conformes aux Kabelanschlusskästen Typ 1 für Verteiltransformatoren
exigences de la EN 50588-2 nach EN 50588-2
This European Standard was approved by CENELEC on 2017-12-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50588-3:2018 E
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references. 4
3 Terms and definitions . 4
4 Electrical requirements and clearances . 5
4.1 General . 5
4.2 High voltage enclosures . 5
4.3 Low voltage boxes . 7
5 Design considerations . 7
5.1 General . 7
5.2 Terminal nuts and stems . 7
5.3 Provision for glanding cables . 7
5.4 Termination of cables within enclosure . 7
6 Testing . 7
6.1 Type tests . 7
6.2 Routine tests . 8
7 Earthing of cable boxes . 8

European foreword
This document (EN 50588-3:2018) has been prepared by CLC/TC 14, "Power Transformers".
The following dates are fixed:
• latest date by which this document has to be (dop) 2018-12-15
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2020-12-15
conflicting with this document have to
be withdrawn
This document supersedes EN 50464-2-2:2007.
The EN 50588 series consists of the following parts, under the general title “Medium power
transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV”:
— Part 1: General requirements
— Part 2: Transformers with cable boxes on the high-voltage and/or low-voltage side – General
requirements for transformers with rated power less than or equal to 3150kVA
— Part 3: Transformers with cable boxes on the high-voltage and/or low-voltage side – Cable
boxes type 1 for use on transformers meeting the requirements of EN 50588-2
— Part 4: Transformers with cable boxes on the high-voltage and/or low-voltage side – Cable
boxes type 2 for use on transformers meeting the requirements of EN 50588-2
1 Scope
This European Standard specifies the requirements for cable boxes, Type 1, in which the cable cores
are terminated. The cable boxes are suitable for use on transformers defined in EN 50588-2,
“Transformers with Cable Boxes”, for side mounted or cover mounted use. The cable boxes are
suitable for operation indoors and outdoors under environmental conditions specified in EN 50588-1.
Important design and construction requirements of the cable boxes are given.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 50180, Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers –
Part 1: General requirem
...