prEN IEC 60115-2:2024/prAA:2024
(Amendment)Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT)
Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT)
This part of IEC 60115 is applicable to fixed low-power film resistors with termination leads for use in electronic equipment, which are typically assembled in through-hole technology (THT) on circuit boards. These resistors are typically described according to types (different geometric shapes) and styles (different dimensions) and product technology. The resistive element of these resistors is typically protected by a conformal lacquer coating. These resistors have wire terminations and are primarily intended to be mounted on a circuit board in through-hole technique. The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60115-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of resistor. Since the documents of the 60115-X series are exempted from the parallel procedure (D162/C089), this New Work Item Proposal aims to endorse the main IEC document IEC 60115-2:2023 as a European standard. The standard shall be published together with the finalised Common Modifications.
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 2: Rahmenspezifikation: Niedrigbelastbare Schichtwiderstände mit Drahtanschlüssen für Durchsteckmontage auf Leiterplatten (THT)
Résistances fixes utilisées dans les équipements électroniques - Partie 2: Spécification intermédiaire: Résistances à broches à couche, à faible dissipation, pour assemblage par trous traversants sur cartes de circuit imprimé (carte THT)
Stalni upori za elektronsko opremo - 2. del: Področna specifikacija: Tankoplastni upori majhne moči z izvodi za montažo skozi prehodne luknje tiskanih vezij
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Stalni upori za elektronsko opremo - 2. del: Področna specifikacija: Tankoplastni
upori majhne moči z izvodi za montažo skozi prehodne luknje tiskanih vezij
Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Low-
power film resistors with leads for through-hole assembly on circuit boards (THT)
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 2:
Rahmenspezifikation: Niedrigbelastbare Schichtwiderstände mit Drahtanschlüssen für
Durchsteckmontage auf Leiterplatten (THT)
Résistances fixes utilisées dans les équipements électroniques - Partie 2: Spécification
intermédiaire: Résistances à couches et à faible dissipation équipées de broches pour
assemblage par trous traversants sur circuits imprimés (THT)
Ta slovenski standard je istoveten z: prEN IEC 60115-2:2024/prAA:2024
ICS:
31.040.10 Fiksni upor Fixed resistors
oSIST prEN IEC 60115- en
2:2024/oprAA:2024
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60115-2:2024
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
October 2024
ICS 31.040.10 -
English Version
Fixed resistors for use in electronic equipment - Part 2: Sectional
specification: Low-power film resistors with leads for through-
hole assembly on circuit boards (THT)
To be completed Festwiderstände zur Verwendung in Geräten der Elektronik
- Teil 2: Rahmenspezifikation: Niedrigbelastbare
Schichtwiderstände mit Drahtanschlüssen für
Durchsteckmontage auf Leiterplatten (THT)
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60115-2:2024; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2024-12-27.
It has been drawn up by CLC/TC 40XB.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 78790 Ref. No. prEN IEC 60115-2:2024/prAA:2024 E
Contents Page
1 European foreword . 3
2 1 Modification to Annex X . 4
3 2 Addition of Annex ZA . 4
4 Annex ZA (normative) Normative references to international publications with their
5 corresponding European publications . 5
6 3 Addition of a new Annex ZX. 6
7 Annex ZB (informative) Cross-references for references to the prior revision of this document
8 . 7
9 European foreword
10 This document (prEN IEC 60115-2:2024/prAA:2024) has been prepared by CLC/TC 40XB, “Resistors”.
11 This document is currently submitted to the Enquiry.
12 The following dates are proposed:
• latest date by which the existence of this document (doa) dor + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
13 Clauses,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.