EN 61850-3:2014
(Main)Communication networks and systems for power utility automation - Part 3: General requirements
Communication networks and systems for power utility automation - Part 3: General requirements
IEC 61850-3:2013 defines the general requirements, mainly regarding construction, design and environmental conditions for utility communication and automation IEDs (intelligent electronic devices) and systems in power plant and substation environments. These general requirements are in line with requirements for IEDs used in similar environments, for example measuring relays and protection equipment. This new edition includes the following significant technical changes with respect to the previous edition: - requirements are in line with those of other equipment used in the same environment (e.g. protection relays); - product safety added based on IEC 60255-27; - EMC requirements completed and in line with IEC 60255 series and IEC 61000-6-5.
Kommunikationsnetze und -systeme für die Automatisierung in der elektrischen Energieversorgung - Teil 3: Allgemeine Anforderungen
Réseaux et systèmes de communication pour l'automatisation des systèmes électriques - Partie 3: Exigences générales
La CEI 61850-3:2013 définit les exigences générales concernant principalement la construction, la conception et les conditions environnementales des IED et des systèmes de communication et d'automatisation dans les centrales électriques et les postes. Ces exigences générales correspondent aux exigences relatives aux IED utilisés dans des environnements similaires tels que par exemple les relais de mesure et les équipements de protection. Cette nouvelle édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - les exigences sont conformes avec celles des autres équipements utilisés dans un même environnement (par exemple, les relais de protection); - la sécurité du produit ajoutée basée sur la CEI 60255-27; - exigences CEM complétées et conformes à la série CEI 60255 et la CEI 61000-6-5.
Komunikacijska omrežja in sistemi za avtomatizacijo porabe električne energije - 3. del: Splošne zahteve (IEC 61850-3:2013)
Standard EN IEC 61850 določa splošne zahteve, večinoma o gradnji, zasnovi in okoljskih pogojih za pametne elektronske naprave (IED) in sisteme za komunikacijo in avtomatizacijo v elektrarnah in postajah. Te splošne zahteve so v skladu z zahtevami za pametne elektronske naprave, uporabljene v podobnih okoljih, na primer merilne releje in zaščitno opremo. Ko so pametne elektronske naprave za komunikacijo in avtomatizacijo sestavni del druge naprave v elektrarni ali postaji, okoljske zahteve za napravo veljajo tudi za komunikacijsko opremo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2014
Nadomešča:
SIST EN 61850-3:2004
Komunikacijska omrežja in sistemi za avtomatizacijo porabe električne energije -
3. del: Splošne zahteve (IEC 61850-3:2013)
Communication networks and systems for power utility automation - Part 3: General
requirements
/
Réseaux et systèmes de communication pour l'automatisation des systèmes électriques
- Partie 3: Exigences générales
Ta slovenski standard je istoveten z: EN 61850-3:2014
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61850-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 33.200 Supersedes EN 61850-3:2002
English Version
Communication networks and systems for power utility
automation - Part 3: General requirements
(IEC 61850-3:2013)
Réseaux et systèmes de communication pour Kommunikationsnetze und -systeme für die
l'automatisation des systèmes électriques - Partie 3: Automatisierung in der elektrischen Energieversorgung -
Exigences générales Teil 3: Allgemeine Anforderungen
(CEI 61850-3:2013) (IEC 61850-3:2013)
This European Standard was approved by CENELEC on 2014-01-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61850-3:2014 E
Foreword
The text of document 57/1391/FDIS, future edition 2 of IEC 61850-3, prepared by IEC/TC 57 "Power
systems management and associated information exchange" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61850-3:2014.
The following dates are fixed:
(dop) 2014-10-18
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-01-16
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61850-3:2002.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61850-3:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60127-1 NOTE Harmonized as EN 60127-1.
IEC 60255-27:2005 NOTE Harmonized as EN 60255-27:2005 (not modified).
IEC 60297-3-101 NOTE Harmonized as EN 60297-3-101.
IEC 60721-3-3 NOTE Harmonized as EN 60721-3-3.
- 3 - EN 61850-3:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
CISPR 22 2008 Information technology equipment - Radio EN 55022 2010
1)
disturbance characteristics - Limits and + AC:2011 2011
methods of measurement
CISPR 24 2010 Information technology equipment - Immunity EN 55024 2010
+ corr. June 2011 characteristics - Limits and methods of
measurement
EN 60068-2-1 2007 Environmental testing -
Part 2-1: Tests - Test A: Cold
IEC 60068-2-2 2007 Environmental testing - EN 60068-2-2 2007
Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-14 2009 Environmental testing - EN 60068-2-14 2009
Part 2-14: Tests - Test N: Change of
temperature
IEC 60068-2-30 2005 Environmental testing - EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)
2)
IEC 60068-2-78 2001 Environmental testing - EN 60068-2-78 2001
Part 2-78: Tests - Test Cab: Damp heat,
steady state
IEC 60255-21-1 Electrical relays - EN 60255-21-1
Part 21: Vibration, shock, bump and seismic
tests on measuring relays and protection
equipment - Section 1: Vibration tests
(sinusoidal)
IEC 60255-21-2 Electrical relays - EN 60255-21-2
Part 21: Vibration, shock, bump and seismic
tests on measuring relays and protection
equipment - Section 2: Shock and bump tests
IEC 60255-21-3 Electrical relays - EN 60255-21-3
Part 21: Vibration, shock, bump and seismic
tests on measuring relays and protection
equipment - Section 3: Seismic tests
IEC 60255-27 2013 Measuring relays and protection equipment - EN 60255-27 2014
Part 27: Product safety requirements
1)
EN 55022 is superseded by EN 50561-1:2013, which is based on .
2)
EN 60068-2-78 is superseded by EN 60068-2-78:2013, which is based on IEC 60068-2-78:2012.
Publication Year Title EN/HD Year
3) 4)
IEC 60417 data HD 243 S12 1995
base
IEC 60529 Degrees of protection provided by enclosures - -
(IP Code)
IEC 60664-1 Insulation coordination for equipment within EN 60664-1
low-voltage systems -
Part 1: Principles, requirements and tests
IEC 60695-11-10 Fire hazard testing - EN 60695-11-10
Part 11-10: Test flames - 50 W horizontal and
vertical flame test methods
IEC 60825-1 Safety of laser products - EN 60825-1
Part 1: Equipment classification and
requirements
IEC 60990 1999 Methods of measurement of touch current and EN 60990 1999
protective conductor current
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) - EN 61000-4-2 2009
Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity
test
IEC 61000-4-3 2008 Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency,
electromagnetic field immunity test
5)
IEC 61000-4-4 2004 Electromagnetic compatibility (EMC) - EN 61000-4-4 2004
+ corr. June 2007 Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst
immunity test
IEC 61000-4-5 2005 Electromagnetic compatibility (EMC) - EN 61000-4-5 2006
+ corr. October 2009 Part 4-5: Testing and measurement
techniques - Surge immunity test
6)
IEC 61000-4-6 2008 Electromagnetic compatibility (EMC) - EN 61000-4-6 2009
Part 4-6: Testing and measurement
techniques - Immunity to conducted
disturbances, induced by radio-frequency
fields
IEC 61000-4-8 2001 Electromagnetic compatibility (EMC) -
Part 4-8: Testing and measurement
techniques - Power frequency magnetic field
immunity test
IEC 61000-4-11 2004 Electromagnetic compatibility (EMC) - EN 61000-4-11 2004
Part 4-11: Testing and measurement
techniques - Voltage dips, short interruptions
and voltage variations immunity tests
IEC 61000-4-16 2002 Electromagnetic compatibility (EMC) -
Part 4-16: Testing and measurement
techniques - Test for immunity to conducted,
common mode disturbances in the frequency
range 0 Hz to 150 kHz
3)
HD 243 S12 includes supplement(s) M to K to IEC 60417.
4)
HD 243 S12 is superseded by EN 60417-2:1999, which is based on IEC 60417-2:1998.
5)
EN 61000-4-4 is superseded by EN 61000-4-4:2012, which is based on IEC 61000-4-4:2012.
6)
EN 61000-4-6 is superseded by EN 61000-4-6:2014, which is based on IEC 61000-4-6:2013.
- 5 - EN 61850-3:2014
Publication Year Title EN/HD Year
IEC 61000-4-17 2009 Electromagnetic compatibility (EMC) - - -
Part 4-17: Testing and measurement
techniques - Ripple on d.c. input power port
immunity test
IEC 61000-4-18 2006 Electromagnetic compatibility (EMC) - EN 61000-4-18 2007
Part 4-18: Testing and measurement + corr. September 2007
techniques - Damped oscillatory wave
immunity test
IEC 61000-4-29 2000 Electromagnetic compatibility (EMC) - EN 61000-4-29 2000
Part 4-29: Testing and measurement
techniques - Voltage dips, short interruptions
and voltage variations on d.c. input power port
immunity tests
IEC 61010-1 2010 Safety requirements for electrical equipment EN 61010-1 2010
+ corr. May 2011 for measurement, control and laboratory use -
Part 1: General requirements
IEC 61180-1 1992 High-voltage test techniques for low-voltage EN 61180-1 1994
equipment -
Part 1: Definitions, test and procedure
requirements
IEC 61180-2 High-voltage test techniques for low-voltage EN 61180-2
equipment -
Part 2: Test equipment
IEC/TS 61850-2 2003 Communication networks and systems in
substations -
Part 2: Glossary
IEC 61850 (Series) Communication networks and systems in EN 61850 (Series)
substations -
Part 6: Configuration description language for
communication in electrical substations
related to IEDs
IEC 62271-1 High-voltage switchgear and controlgear - EN 62271-1
Part 1: Common specifications
IEEE 1613 2009 IEEE Standard Environmental and Testing
Requirements for Communications
Networking Devices Installed in Electric Power
Substations
ISO 780 1997 Packaging - Pictorial marking for handling of EN ISO 780 1999
goods
ISO 7000 Graphical symbols for use on equipment -
Registered symbols
ISO 9772 Cellular plastics - Determination of horizontal
burning characteristics of small specimens
subjected to a small flame
IEC 61850-3 ®
Edition 2.0 2013-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Communication networks and systems for power utility automation –
Part 3: General requirements
Réseaux et systèmes de communication pour l'automatisation
des systèmes électriques –
Partie 3: Exigences générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XB
ICS 33.200 ISBN 978-2-8322-1216-5
– 2 – 61850-3 © IEC:2013
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviations . 9
3.1 Terms and definitions . 9
3.2 Abbreviations . 20
4 Environmental conditions . 20
4.1 General . 20
4.2 Normal environmental conditions . 20
4.3 Special environmental conditions . 21
4.4 Storage conditions . 22
5 Ratings . 22
5.1 General . 22
5.2 Rated voltage – Auxiliary energizing voltage . 22
5.2.1 AC voltage . 22
5.2.2 DC voltage. 22
5.2.3 Operating range . 22
5.3 Binary input and output .
...
SLOVENSKI STANDARD
01-oktober-2014
1DGRPHãþD
SIST EN 61850-3:2004
.RPXQLNDFLMVNDRPUHåMDLQVLVWHPL]DDYWRPDWL]DFLMRSRUDEHHOHNWULþQHHQHUJLMH
GHO 6SORãQH]DKWHYH ,(&
Communication networks and systems for power utility automation - Part 3: General
requirements
/
Réseaux et systèmes de communication pour l'automatisation des systèmes électriques
- Partie 3: Exigences générales
Ta slovenski standard je istoveten z: EN 61850-3:2014
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61850-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 33.200 Supersedes EN 61850-3:2002
English Version
Communication networks and systems for power utility
automation - Part 3: General requirements
(IEC 61850-3:2013)
Réseaux et systèmes de communication pour Kommunikationsnetze und -systeme für die
l'automatisation des systèmes électriques - Partie 3: Automatisierung in der elektrischen Energieversorgung -
Exigences générales Teil 3: Allgemeine Anforderungen
(CEI 61850-3:2013) (IEC 61850-3:2013)
This European Standard was approved by CENELEC on 2014-01-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61850-3:2014 E
Foreword
The text of document 57/1391/FDIS, future edition 2 of IEC 61850-3, prepared by IEC/TC 57 "Power
systems management and associated information exchange" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61850-3:2014.
The following dates are fixed:
(dop) 2014-10-18
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-01-16
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61850-3:2002.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61850-3:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60127-1 NOTE Harmonized as EN 60127-1.
IEC 60255-27:2005 NOTE Harmonized as EN 60255-27:2005 (not modified).
IEC 60297-3-101 NOTE Harmonized as EN 60297-3-101.
IEC 60721-3-3 NOTE Harmonized as EN 60721-3-3.
- 3 - EN 61850-3:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
CISPR 22 2008 Information technology equipment - Radio EN 55022 2010
1)
disturbance characteristics - Limits and + AC:2011 2011
methods of measurement
CISPR 24 2010 Information technology equipment - Immunity EN 55024 2010
+ corr. June 2011 characteristics - Limits and methods of
measurement
EN 60068-2-1 2007 Environmental testing -
Part 2-1: Tests - Test A: Cold
IEC 60068-2-2 2007 Environmental testing - EN 60068-2-2 2007
Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-14 2009 Environmental testing - EN 60068-2-14 2009
Part 2-14: Tests - Test N: Change of
temperature
IEC 60068-2-30 2005 Environmental testing - EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)
2)
IEC 60068-2-78 2001 Environmental testing - EN 60068-2-78 2001
Part 2-78: Tests - Test Cab: Damp heat,
steady state
IEC 60255-21-1 Electrical relays - EN 60255-21-1
Part 21: Vibration, shock, bump and seismic
tests on measuring relays and protection
equipment - Section 1: Vibration tests
(sinusoidal)
IEC 60255-21-2 Electrical relays - EN 60255-21-2
Part 21: Vibration, shock, bump and seismic
tests on measuring relays and protection
equipment - Section 2: Shock and bump tests
IEC 60255-21-3 Electrical relays - EN 60255-21-3
Part 21: Vibration, shock, bump and seismic
tests on measuring relays and protection
equipment - Section 3: Seismic tests
IEC 60255-27 2013 Measuring relays and protection equipment - EN 60255-27 2014
Part 27: Product safety requirements
1)
EN 55022 is superseded by EN 50561-1:2013, which is based on .
2)
EN 60068-2-78 is superseded by EN 60068-2-78:2013, which is based on IEC 60068-2-78:2012.
Publication Year Title EN/HD Year
3) 4)
IEC 60417 data HD 243 S12 1995
base
IEC 60529 Degrees of protection provided by enclosures - -
(IP Code)
IEC 60664-1 Insulation coordination for equipment within EN 60664-1
low-voltage systems -
Part 1: Principles, requirements and tests
IEC 60695-11-10 Fire hazard testing - EN 60695-11-10
Part 11-10: Test flames - 50 W horizontal and
vertical flame test methods
IEC 60825-1 Safety of laser products - EN 60825-1
Part 1: Equipment classification and
requirements
IEC 60990 1999 Methods of measurement of touch current and EN 60990 1999
protective conductor current
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) - EN 61000-4-2 2009
Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity
test
IEC 61000-4-3 2008 Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency,
electromagnetic field immunity test
5)
IEC 61000-4-4 2004 Electromagnetic compatibility (EMC) - EN 61000-4-4 2004
+ corr. June 2007 Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst
immunity test
IEC 61000-4-5 2005 Electromagnetic compatibility (EMC) - EN 61000-4-5 2006
+ corr. October 2009 Part 4-5: Testing and measurement
techniques - Surge immunity test
6)
IEC 61000-4-6 2008 Electromagnetic compatibility (EMC) - EN 61000-4-6 2009
Part 4-6: Testing and measurement
techniques - Immunity to conducted
disturbances, induced by radio-frequency
fields
IEC 61000-4-8 2001 Electromagnetic compatibility (EMC) -
Part 4-8: Testing and measurement
techniques - Power frequency magnetic field
immunity test
IEC 61000-4-11 2004 Electromagnetic compatibility (EMC) - EN 61000-4-11 2004
Part 4-11: Testing and measurement
techniques - Voltage dips, short interruptions
and voltage variations immunity tests
IEC 61000-4-16 2002 Electromagnetic compatibility (EMC) -
Part 4-16: Testing and measurement
techniques - Test for immunity to conducted,
common mode disturbances in the frequency
range 0 Hz to 150 kHz
3)
HD 243 S12 includes supplement(s) M to K to IEC 60417.
4)
HD 243 S12 is superseded by EN 60417-2:1999, which is based on IEC 60417-2:1998.
5)
EN 61000-4-4 is superseded by EN 61000-4-4:2012, which is based on IEC 61000-4-4:2012.
6)
EN 61000-4-6 is superseded by EN 61000-4-6:2014, which is based on IEC 61000-4-6:2013.
- 5 - EN 61850-3:2014
Publication Year Title EN/HD Year
IEC 61000-4-17 2009 Electromagnetic compatibility (EMC) - - -
Part 4-17: Testing and measurement
techniques - Ripple on d.c. input power port
immunity test
IEC 61000-4-18 2006 Electromagnetic compatibility (EMC) - EN 61000-4-18 2007
Part 4-18: Testing and measurement + corr. September 2007
techniques - Damped oscillatory wave
immunity test
IEC 61000-4-29 2000 Electromagnetic compatibility (EMC) - EN 61000-4-29 2000
Part 4-29: Testing and measurement
techniques - Voltage dips, short interruptions
and voltage variations on d.c. input power port
immunity tests
IEC 61010-1 2010 Safety requirements for electrical equipment EN 61010-1 2010
+ corr. May 2011 for measurement, control and laboratory use -
Part 1: General requirements
IEC 61180-1 1992 High-voltage test techniques for low-voltage EN 61180-1 1994
equipment -
Part 1: Definitions, test and procedure
requirements
IEC 61180-2 High-voltage test techniques for low-voltage EN 61180-2
equipment -
Part 2: Test equipment
IEC/TS 61850-2 2003 Communication networks and systems in
substations -
Part 2: Glossary
IEC 61850 (Series) Communication networks and systems in EN 61850 (Series)
substations -
Part 6: Configuration description language for
communication in electrical substations
related to IEDs
IEC 62271-1 High-voltage switchgear and controlgear - EN 62271-1
Part 1: Common specifications
IEEE 1613 2009 IEEE Standard Environmental and Testing
Requirements for Communications
Networking Devices Installed in Electric Power
Substations
ISO 780 1997 Packaging - Pictorial marking for handling of EN ISO 780 1999
goods
ISO 7000 Graphical symbols for use on equipment -
Registered symbols
ISO 9772 Cellular plastics - Determination of horizontal
burning characteristics of small specimens
subjected to a small flame
IEC 61850-3 ®
Edition 2.0 2013-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Communication networks and systems for power utility automation –
Part 3: General requirements
Réseaux et systèmes de communication pour l'automatisation
des systèmes électriques –
Partie 3: Exigences générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XB
ICS 33.200 ISBN 978-2-8322-1216-5
– 2 – 61850-3 © IEC:2013
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviations . 9
3.1 Terms and definitions . 9
3.2 Abbreviations . 20
4 Environmental conditions . 20
4.1 General . 20
4.2 Normal environmental conditions . 20
4.3 Special environmental conditions . 21
4.4 Storage conditions . 22
5 Ratings . 22
5.1 General . 22
5.2 Rated voltage – Auxiliary energizing voltage . 22
5.2.1 AC voltage . 22
5.2.2 DC voltage. 22
5.2.3 Operating range . 22
5.3 Binary input and output . 22
5.3.1 Binary input . 22
5.3.2 Binary output . 22
5.4 Rated burden .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.