EN 50377-14-1:2011

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C

This standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements that an assembled singlemode patch cord with cylindrical ferruled connectors shall meet in order for it to be categorised as an EN standard product. Since different variants and grades of performance are permitted, product marking details are given in 3.4 and Clause 4.

Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Datenübertragungssysteme - Produktnormen - Teil 14-1: Verbindungskabel für Einmodenfasern der Kategorien B1.1 und B1.3 nach EN 60793 2 50 für die Kategorie C

Jeux de connecteurs et composants d’interconnexion à utiliser dans les systèmes de communication par fibres optiques - Spécifications de produits - Partie 14-1: Cordons avec fibre unimodale de catégories B1.1 et B1.3 conforme à l’IEC 60793-2-50 pour la catégorie C

Konektorski sestavi in povezovalne komponente za optične komunikacijske sisteme - Specifikacija izdelka - 14-1. del: Vrvice z enorodnim optičnim vlaknom po EN 60793-2-50 kategorij B1.1 in B1.3 za kategorijo C

Ta standard vsebuje začetne zahteve za dimenzije, optične in mehanske zahteve ter zahteve za okoljsko učinkovitost, ki jim mora ustrezati sestavljena enorodna priključna vrvica s cilindričnimi konektorji s spojko, da bi bila opredeljena kot izdelek standarda EN. Ker so dovoljene različice in različne stopnje zmogljivosti, so podrobnosti o označevanju proizvoda navedene v 3.4 in v točki 4.

General Information

• Status: Withdrawn
• Publication Date: 09-Jun-2011
• Withdrawal Date: 01-May-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-May-2019
• Completion Date: 14-May-2019
• Ref Project: SIST EN 50377-14-1:2011 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C

Relations

• Replaced By: EN 50377-14-1:2018 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using EN 60793 2 50 single-mode B1 or B6 fibre for Category C according to EN 61753 1
• Effective Date: 07-Jun-2022
• Revised: prEN 50377-14-1 - Connector sets and interconnect components to be used in optical fibre communication systems — Product specifications Part 14-1: Simplex and Duplex Cords with IEC 60793-2-50 singlemode category B1.3 and B6 fibre for Category C according to IEC 61753-1.
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50377-14-1:2011
01-september-2011
.RQHNWRUVNLVHVWDYLLQSRYH]RYDOQHNRPSRQHQWH]DRSWLþQHNRPXQLNDFLMVNH
VLVWHPH6SHFLILNDFLMDL]GHONDGHO9UYLFH]HQRURGQLPRSWLþQLPYODNQRPSR
(1NDWHJRULM%LQ%]DNDWHJRULMR&
Connector sets and interconnect components to be used in optical fibre communication
systems - Product specifications - Part 14-1: Cords with IEC 60793-2-50 singlemode
category B1.1 and B1.3 fibre for category C
Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-
Datenübertragungssysteme - Produktnormen -- Teil 14-1: Verbindungskabel für
Einmodenfasern der Kategorien B1.1 und B1.3 nach EN 60793 2 50 für die Kategorie C
Ta slovenski standard je istoveten z: EN 50377-14-1:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 50377-14-1:2011 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50377-14-1:2011

---------------------- Page: 2 ----------------------

SIST EN 50377-14-1:2011

EUROPEAN STANDARD
EN 50377-14-1

NORME EUROPÉENNE
June 2011
EUROPÄISCHE NORM

ICS 33.180.20


English version


Connector sets and interconnect components to be used in optical fibre
communication systems -
Product specifications -
Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3
fibre for category C



 Steckverbindersätze und
Verbindungsbauelemente für
Lichtwellenleiter-
Datenübertragungssysteme -
Produktnormen -
Teil 14-1: Verbindungskabel für
Einmodenfasern der Kategorien B1.1 und
B1.3 nach EN 60793 2 50 für die
Kategorie C


This European Standard was approved by CENELEC on 2011-05-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50377-14-1:2011 E

---------------------- Page: 3 ----------------------

SIST EN 50377-14-1:2011
EN 50377-14-1:2011 – 2 –
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic
interconnect, passive and connectorised components.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as
EN 50377-14-1 on 2011-05-02.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.
The following dates were fixed:
– latest date by which the EN has to be implemented

at national level by publication of an identical

national standard or by endorsement
(dop) 2012-05-02

– latest date by which the national standards conflicting

with the EN have to be withdrawn
(dow) 2014-05-02
This document includes the performance of the patch cord, as well as latest attenuation and return loss
grades as specified in IEC.
__________

---------------------- Page: 4 ----------------------

SIST EN 50377-14-1:2011
– 3 – EN 50377-14-1:2011
Connector sets and interconnect components to be used in optical fibre communication systems –
Product specifications
Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C
Description Performance
Fibre category: EN 60793-2-50 Application: For use in EN category C
Types B1.1 and B1.3 (controlled environment)
Cable type: EN 60794-2-50 Attenuation grades: B: ≤ 0,12 dB mean
Type simplex cables (random mate)
≤ 0,25 dB for ≥ 97 %
of measurements

C: ≤ 0,25 dB mean
≤ 0,50 dB for ≥ 97 %
of measurements
...