EN 61158-3-19:2012
(Main)Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements
Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements
2012-03-22 - Publication editing allocated to cpalagi@cencenelec.eu * Project handled under parallel procedures as FprEN 61158-300 and split into 5 parts to be published as EN 61158-3-12, 14, 19, 21 and 22 * Supersedes EN 61158-3-19:2008 * Superseded by EN 61158-3-19:2014
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-19: Dienstfestlegungen des Data Link Layer (Sicherungsschicht) - Typ 19-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-19: Définition des services de couche liaison de données - Eléments de type 19
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-19. del: Definicija opravil na nivoju podatkovnih povezav - Elementi tipa 19 (IEC 61158-3-19:2010)
Ta standard določa skupne elemente za osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Izraz »časovno kritičen« se uporablja za predstavljanje prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več določenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja določenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa zunanje vidno opravilo, ki ga zagotavlja nivo podatkovnih povezav procesnih vodil tipa 19 v zvezi z a) primitivnimi dejanji in dogodki opravila; b) parametri, povezanimi z vsakim primitivnim dejanjem in dogodkom, in obliko, ki jo prevzamejo; ter c) medsebojno povezavo med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji. Namen tega standarda je določiti opravila, ki se zagotavljajo za: – aplikacijski nivo procesnih vodil tipa 19 na meji med aplikacijskim nivojem in nivojem podatkovnih povezav referenčnega modela procesnih vodil ter – vodenje sistemov na meji med nivojem podatkovnih povezav in vodenje sistemov referenčnega modela procesnih vodil.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2012
1DGRPHãþD
SIST EN 61158-3-19:2008
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 3-19. del:
Definicija opravil na nivoju podatkovnih povezav - Elementi tipa 19 (IEC 61158-3-
19:2010)
Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer
service definition - Type 19 elements (IEC 61158-3-19:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 3-19: Dienstfestlegungen des Data
Link Layer (Sicherungsschicht) - Typ 19-Elemente (IEC 61158-3-19:2010)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 3-19:
Définition des services de couche liaison de données - Eléments de type 19 (CEI 61158-
3-19:2010)
Ta slovenski standard je istoveten z: EN 61158-3-19:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61158-3-19
NORME EUROPÉENNE
May 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.20; 35.110 Supersedes EN 61158-3-19:2008
English version
Industrial communication networks -
Fieldbus specifications -
Part 3-19: Data-link layer service definition -
Type 19 elements
(IEC 61158-3-19:2010)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 3-19: Définition des services de Teil 3-19: Dienstfestlegungen des Data
couche liaison de données - Link Layer (Sicherungsschicht) -
Eléments de type 19 Typ 19-Elemente
(CEI 61158-3-19:2010) (IEC 61158-3-19:2010)
This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-3-19:2012 E
Foreword
The text of document 65C/604/FDIS, future edition 2 of IEC 61158-3-19, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-3-19:2012.
The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-3-19:2008.
19:2008:
increasing the number of supported devices (511 instead of 254);
introducing a communication version identification;
adding a mechanism for remote address allocation;
introducing enhanced parameter addressing (32 bit instead of 16 bit);
restructuring control and status word;
improving the redundancy and hotplug features;
improving the error handling;
adding a multiplexing protocol (SMP: Type 19 Messaging Protocol).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-3-19:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC/TR 61158-1:2010 NOTE Harmonized as CLC/TR 61158-1:2010 (not modified).
IEC 61158-4-19:2010 NOTE Harmonized as EN 61158-4-19:2012 (not modified).
IEC 61158-5-19:2010 NOTE Harmonized as EN 61158-5-19:2012 (not modified).
IEC 61158-6-19:2010 NOTE Harmonized as EN 61158-6-19:2012 (not modified).
IEC 61784-1:2010 NOTE Harmonized as EN 61784-1:2010 (not modified).
IEC 61784-2:2010 NOTE Harmonized as EN 61784-2:2010 (not modified).
- 3 - EN 61158-3-19:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 7498-3 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
Naming and addressing
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services
IEC 61158-3-19 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 3-19: Data-link layer service definition – Type 19 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
T
ICS 25.04.40; 35.100.20; 35.110 ISBN 978-2-88912-078-9
– 2 – 61158-3-19 © IEC:2010(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
1.1 Overview .6
1.2 Specifications.6
1.3 Conformance.6
2 Normative references .7
3 Terms, definitions, symbols, abbreviations and conventions .7
3.1 Reference model terms and definitions.7
3.2 Service convention terms and definitions.8
3.3 Data-link service terms and definitions .9
3.4 Symbols and abbreviations.12
3.5 Common conventions .13
4 Data-link services and concepts .14
4.1 Overview .14
4.2 Service channel services (SVC services).16
4.3 Hot-plug services .18
4.4 Realtime channel setup services (RTCS services).19
4.5 RTC services.21
Bibliography.25
Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses .11
Table 1 – Summary of DL services and primitives .15
Table 2 – Read (RD).17
Table 3 – Write (WR) .18
Table 4 – Enable_Hotplug (EHP) .18
Table 5 – Notify_Hotplug (NHP) .19
Table 6 – Initiate_cyclic_communication (ICC).20
Table 7 – Disable_cyclic_communication (DCC) .21
Table 8 – Notify_Error (NER) .21
Table 9 – Write_cyclic (WRC) .22
Table 10 – Get_Device_Status (GDS).22
Table 11 – Write_Device_Status (WDS).23
Table 12 – Notify_Network_Status_Change (NNSC) .24
61158-3-19 © IEC:2010(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 3-19: Data-link layer service definition –
Type 19 elements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the el
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.