prEN IEC 61810-7-18:2023
(Main)Electrical relays - Tests and Measurements - Part 7-18: Thermal resistance of the coil
Electrical relays - Tests and Measurements - Part 7-18: Thermal resistance of the coil
Električni releji - Preskusi in meritve - 7-18. del: Toplotna upornost tuljave
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61810-7-18:2023
01-september-2023
Električni releji - Preskusi in meritve - 7-18. del: Toplotna upornost tuljave
Electrical relays - Tests and Measurements - Part 7-18: Thermal resistance of the coil
Ta slovenski standard je istoveten z: prEN IEC 61810-7-18:2023
ICS:
29.120.70 Releji Relays
oSIST prEN IEC 61810-7-18:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61810-7-18:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61810-7-18:2023
94/886/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61810-7-18 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-07-07 2023-09-29
SUPERSEDES DOCUMENTS:
94/811/CD, 94/872/CC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 121,SC 121A
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Electrical relays – Tests and Measurements – Part 7-18: Thermal resistance of the coil
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61810-7-18:2023
– 2 – IEC CDV 61810-7-18:2023 © IEC 2023
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 Test procedure . 6
7 5 Evaluation . 7
8 Annex T (normative) Test report . 8
9 Bibliography . 9
10
11
12 Figure A.1 – Test arrangement . 19
13
14
15 Table 1 – Cross-sectional areas and lengths of conductors dependent on the current
16 carried by the terminal . 16
17
18
---------------------- Page: 4 ----------------------
oSIST prEN IEC 61810-7-18:2023
IEC CDV 61810-7-18:2023 © IEC 2023 – 3 –
19 INTERNATIONAL ELECTROTECHNICAL COMMISSION
20 ____________
21
22 Electrical Relays –
23 Testing and Measurements
24
25 Part 7-18: Thermal resistance of the coil
26
27 FOREWORD
28 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization
29 comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to p
30 2) romote international co-operation on all questions concerning standardization in the electrical and electronic
31 fields.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.