EN 50136-1:2012
(Main)Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems
Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems
This European Standard specifies the requirements for the performance, reliability and security characteristics of alarm transmission systems. It specifies the requirements for alarm transmission systems providing alarm transmission between an alarm system at a supervised premises and annunciation equipment at an alarm receiving centre. This European Standard applies to transmission systems for all types of alarm messages such as fire, intrusion, access control, social alarm, etc. Different types of alarm systems may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages. These messages are also considered to be alarm messages in the context of this standard. The term alarm is used in this broad sense throughout the document. Additional alarm transmission requirements of specific types of alarm systems are given in the relevant European Standards.
Alarmanlagen - Alarmübertragungsanlagen und -einrichtungen - Teil 1: Allgemeine Anforderungen an Alarmübertragungsanlagen
Systèmes d'alarme - Systèmes et équipements de transmission d'alarme - Partie 1: Exigences générales pour les systèmes de transmission d'alarme
Alarmni sistemi - Sistemi in oprema za prenos alarma - 1. del: Splošne zahteve za sisteme za prenos alarmov
Ta evropski standard določa zahteve za značilnosti delovanja, zanesljivosti in varnosti sistemov za prenos alarma. Standard določa zahteve za sisteme za prenos alarma, ki omogočajo prenos alarma med alarmnim sistemom na varovanem območju in opozorilno opremo v sprejemnem centru za alarme. Ta evropski standard se uporablja za sisteme za prenos vseh vrst alarmnih sporočil, kot so sporočila v primeru ognja ali vdora, sporočila v zvezi z nadzorom dostopa, sporočila socialnega alarma itd. Različne vrste alarmnih sistemov lahko poleg alarmnih sporočil pošiljajo tudi druge vrste sporočil, npr. sporočila o napakah in stanju. V okviru tega standarda tudi ta sporočila veljajo za alarmna sporočila. Izraz alarm se v tako širokem smislu uporablja v celotnem dokumentu. Dodatne zahteve v zvezi s prenosom alarma za posebne vrste alarmnih sistemov so navedene v ustreznih evropskih standardih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2012
1DGRPHãþD
SIST EN 50136-1-1:1999
SIST EN 50136-1-1:1999/A1:2001
SIST EN 50136-1-1:1999/A2:2008
SIST EN 50136-1-2:1999
SIST EN 50136-1-3:1999
SIST EN 50136-1-4:1999
SIST EN 50136-1-5:2008
Alarmni sistemi - Sistemi in oprema za prenos alarma - 1. del: Splošne zahteve za
sisteme za prenos alarmov
Alarm systems - Alarm transmission systems - Part 1: General requirements for alarm
transmission systems
Alarmanlagen - Alarmübertragungsanlagen - Teil 1: Allgemeine Anforderungen an
Alarmübertragungsanlagen
Systèmes d'alarme - Systèmes de transmission d'alarme - Partie 1: Exigences générales
pour les systèmes de transmission d'alarme
Ta slovenski standard je istoveten z: EN 50136-1:2012
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 50136-1
NORME EUROPÉENNE
January 2012
EUROPÄISCHE NORM
ICS 13.320 Supersedes EN 50136-1-1:1998 + A1:2001 + A2:2008, EN 50136-1-2:1998, EN 50136-1-
3:1998, EN 50136-1-4:1998, EN 50136-1-5:2008
English version
Alarm systems -
Alarm transmission systems and equipment -
Part 1: General requirements for alarm transmission systems
Systèmes d'alarme - Alarmanlagen -
Systèmes et équipements de transmission Alarmübertragungsanlagen und -
d'alarme - einrichtungen -
Partie 1: Exigences générales pour les Teil 1: Allgemeine Anforderungen an
systèmes de transmission d'alarme Alarmübertragungsanlagen
This European Standard was approved by CENELEC on 2011-12-26. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50136-1:2012 E
Contents
Foreword . 4
1 Scope . 5
2 Normative references . 5
3 Object . 5
4 Terms, definitions and abbreviations . 5
4.1 Terms and definitions . 5
4.2 Abbreviations . 9
5 General requirements . 10
5.1 ATS configuration . 10
5.2 ATS categories . 10
5.3 Applicable network standards . 11
6 System requirements . 11
6.1 General . 11
6.2 Transmission link requirements . 12
6.3 Performance . 13
6.4 Securing of messages in the alarm transmission system . 16
6.5 Alarm transmission acknowledgement . 16
6.6 ATS generated alarms . 16
6.7 Availability . 17
6.8 Security . 18
7 Verification of performance . 19
7.1 General . 20
7.2 ATSN performance . 20
7.3 Transmission time . 20
7.4 Verification interval . 20
7.5 Availability . 20
8 Documentation . 22
Annex A (informative) ATS configurations examples . 24
Annex B (informative) Availability examples . 27
Annex C (informative) Verification of performance . 28
C.1 Introduction . 28
C.2 Set up configuration . 28
C.3 System evaluation and functional verification. 28
C.4 Functional verification . 28
Annex D (normative) Classes for category C . 30
Bibliography . 32
Figures
Figure 1 Logical representation of an ATS . 23
Figure A.1 Example of a simple single path alarm transmission system . 24
Figure A.2 Example of a simple dual path alarm transmission system . 25
Figure A.3 Example of a dual path alarm transmission system . 26
– 3 – EN 50136-1:2012
Tables
Table 1 ATS configuration . 11
Table 2 Transmission time . 14
Table 3 Maximum reporting time . 15
Table 4 RCT to AE alarm reporting . 16
Table 5 SPT to AS alarm reporting . 17
Table 6 ATS availability recording . 18
Table 7 ATSN availability . 18
Table 8 SPT substitution security requirements . 19
Table 9 Information security requirements. 19
Table C.1 Verification Results Table . 29
Table D.1 Transmission time classification . 30
Table D.2 Transmission time, maximum values . 30
Table D.3 Reporting time classification. 30
Table D.4 Availability classification . 30
Table D.5 Substitution security . 31
Table D.6 Information security . 31
Foreword
This document (EN 50136-1:2012) has been prepared by CLC Technical Body CLC/TC 79, "Alarm systems".
The following dates are fixed:
• latest date by which this document has to be
(dop) 2012-12-26
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards
(dow) 2014-12-26
conflicting with this document have to
be withdrawn
This document supersedes EN 50136-1-1:1998 + A1:2001 + A2:2008, EN 50136-1-2:1998, EN 50136-1-
3:1998, EN 50136-1-4:1998 and EN 50136-1-5:2008.
The EN 50136 / CLC/TS 50136 series consists of the following parts, under the general title Alarm
systems Alarm transmission systems and equipment:
− Part 1 General requirements for alarm transmission systems;
1)
− Part 2 Requirements for Supervised Premises Transceiver (SPT);
1)
− Part 3 Requirements for Receiving Centre Transceiver (RCT);
− Part 4 Annunciation equipment used in alarm receiving centres;
2)
− Part 5 (free);
2)
− Part 6 (free);
− Part 7 Application guidelines.
1) At draft stage.
2) Under consideration.
– 5 – EN 50136-1:2012
1 Scope
This European Standard specifies the requirements for the performance, reliability and security
characteristics of alarm transmission systems.
It specifies the requirements for alarm transmission systems providing alarm transmission between an alarm
system at a supervised premises and annunciation equipment at an alarm receiving centre.
This European Standard applies to transmission systems for all types of alarm messages such as fire,
intrusion, access control, social alarm, etc. Different types of alarm systems may in addition to alarm
messages also send other types of messages, e.g. fault messages and status messages. These messages
are also considered to be alarm messages in the context of this standard. The term alarm is used in this
broad sense throughout the document.
Additional alarm transmission requirements of specific types of alarm systems are given in the relevant
European Standards.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
1)
EN 50136-2
Alarm systems Alarm transmission systems and equipment Part 2:
Requirements for Supervised Premises Transceiver (SPT)
1)
EN 50136-3
Alarm systems Alarm transmission systems and equipment Part 3:
Requirements for Receiving Centre Transceiver (RCT)
ISO/IEC 10118 series Information technology Security techniques Hash-functions
ISO/IEC 18033 series
Information technology Security techniques Encryption algorithms
3 Object
The object of this European Standard is to specify the general requirements for the performance, reliability,
resilience and security of alarm transmission systems and to ensure their suitability for use with different
types of alarm systems and annunciation equipment.
An alarm transmission system may use any type of transmission network.
When the ATS functions are integrated into an al
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.