EN 50377-10-1:2003
(Main)Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-1: Type MU-PC terminated on IEC 60793-2 category B1.1 singlemode fibre
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-1: Type MU-PC terminated on IEC 60793-2 category B1.1 singlemode fibre
Superseded by EN 50377-10-1:2007
Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Datenübertragungssysteme - Produktnormen - Teil 10-1: Bauart MU-PC zum Anschluss von Einmodenfasern nach IEC 60793-2, Kategorie B1.1
Jeux de connecteurs et composants d'interconnexion à utiliser dans les systèmes de communication par fibres optiques - Spécifications de produit - Partie 10-1: Type MU-PC câblés sur une fibre unimodale de la catégorie B1.1 de la CEI 60793-2
Konektorski pribor in povezovalne komponente za uporabo v komunikacijskih sistemih s pomočjo optičnih vlaken – Specifikacije izdelka – 10-1. del: Tip MU-PC zaključen na eno-rodnem vlaknu kategorije B1 po IEC 60793-2*
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 50377-10-1:2004
STANDARD
september 2004
Konektorski pribor in povezovalne komponente za uporabo v komunikacijskih
VLVWHPLKVSRPRþMRRSWLþQLKYODNHQ±6SHFLILNDFLMHL]GHOND±GHO 7LS08
3&]DNOMXþHQQDHQRURGQHPYODNQXNDWHJRULMH%SR,(&
Connector sets and interconnect components to be used in optical fibre
communication systems - Product specifications - Part 10-1: MU-PC terminated on
IEC 60793-2 category B1 singlemode fibre
ICS 5HIHUHQþQDãWHYLOND
33.180.20
SIST EN 50377-10-1:2004(en)
!#"$%&’& ()$*+
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 50377-10-1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2003
ICS 33.180.20
English version
Connector sets and interconnect components
to be used in optical fibre communication systems -
Product specifications
Part 10-1: Type MU-PC terminated on IEC 60793-2
category B1.1 singlemode fibre
Jeux de connecteurs et composants Steckverbindersätze und
d'interconnexion à utiliser Verbindungsbauelemente für
dans les systèmes de communication Lichtwellenleiter-
par fibres optiques - Datenübertragungssysteme -
Spécifications de produit Produktnormen
Partie 10-1: Type MU-PC câblés Teil 10-1: Bauart MU-PC zum
sur une fibre unimodale Anschluss von Einmodenfasern
de la catégorie B1.1 de la CEI 60793-2 nach IEC 60793-2, Kategorie B1.1
This European Standard was approved by CENELEC on 2002-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50377-10-1:2003 E
---------------------- Page: 2 ----------------------
EN 50377-10-1:2003 - 2 -
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic
connectors.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as
EN 50377-10-1 on 2002-09-01.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-12-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-09-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A and B are normative.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 50377-10-1:2003
Connector sets and interconnected components to be used in optical fibre
communication systems – Product specifications
Part 10-1: Type MU-PC terminated on IEC 60793-2 category B1.1 singlemode fibre
Description Performance
Coupling mechanism: push-pull Application: EN 61753 Category U and
ES 200 671 (see 1.3)
Configuration: plug/adaptor/plug
Attenuation grades: P: < 0,35 dB mean.
Fibre Category: IEC 60793-2 type B1.1 (Random mate) < 1,0 dB for > 97% of measurements
Q: < 0,30 dB mean.
Cable Type: see Table 3 < 0,60 dB for > 99% of measurements
Return loss: W: ≥ 45dB
Related documents:
EN 60794-2 Optical fibre cables - Part 2: Indoor cables - Sectional specification
EN 61300 series Fibre optic interconnection devices and passive components - Basic test and measurement
procedures
EN 61753 series Fibre optic connectors interconnecting devices and passive components performance
standard
EN 61754-6 Fibre optic connector interfaces - Part 6: Type MU connector family
ES 200 671 Transmission and Multiplexing (TM); Passive optical components; Optical fibre
connectors for single mode optical fibre communication systems; Common requirements
and conformance testing
IEC 60793-2 Optical fibres - Part 2: Product specifications
Outline and maximum dimens
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.