EN 61300-2-29:1997

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure

IEC 61300-2-29:1995 is to determine the effect on a fibre optic device of reduced air pressure, such as might be encountered at high altitudes.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren - Teil 2-29: Prüfungen: Niedriger Luftdruck

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-29: Essais - Basse pression atmosphérique

IEC 61300-2-29:1995 détermine l'effet sur un dispositif à fibres optiques d'une pression atmosphérique réduite, semblable à celle qui est rencontrée en altitude.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure (IEC 61300-2-29:1995)

General Information

• Status: Published
• Publication Date: 06-Aug-1997
• Withdrawal Date: 31-May-1998
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 07-Aug-1997
• Completion Date: 07-Aug-1997
• Ref Project: SIST EN 61300-2-29:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-29: Tests - Low air pressure

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-29:1999
01-maj-1999
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-29: Tests - Low air pressure (IEC 61300-2-
29:1995)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-29: Tests - Low air pressure
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren -- Teil 2-29: Prüfungen: Niedriger Luftdruck
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-29: Essais - Basse pression
atmosphérique
Ta slovenski standard je istoveten z: EN 61300-2-29:1997
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-29:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

NORME CE1
INTERNATIONALE 1 EC
1300-2-29
INTERNATIONAL
Première édition
STANDARD
First edition
1995-06
Dispositifs d'interconnexion et composants
passifs à fibres optiques –
Méthodes fondamentales d'essais
et de mesures –
Partie 2-29:
Essais – Basse pression atmosphérique
Fibre optic interconnecting devices
–
and passive components
Basic test and measurement procedures –
Part 2-29:
Tests – Low air pressure
de reproduction réservés — Copyright — all rights reserved
© DEI 1995 Droits
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
les microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher.
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique Internationale
CODE PRIX
International Electrotechnical Commission
D
PRICE CODE
IEC MemayHapoauae 3netcrporexHHVecnae i{OMHCCHR
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue

---------------------- Page: 2 ----------------------

1300-2-29 © IEC:1995 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS —
BASIC TEST AND MEASUREMENT PROCEDURES —
Part 2-29: Tests — Low air pressure
FOREWORD
The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
1)
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and electronic
fields. To this end and in addition to other activities, the IEC publishes International Standards. Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
with may participate in this preparatory work. International, governmental and non-governmental organizations
IEC also participate in this preparation. The IEC collaborates closely with the International
liaising with the
Standardization (ISO) in accordance with conditions determined by agreement between the
Organization for
two organizations.
The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
2)
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use published in the form of standards, technical
3)
s or guides and they are accepted by the National Committees in that sense.
report
unification, IEC National Committees undertake to apply IEC International
In order to promote international
4)
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated i n. the latter.
International Standard IEC 1300-2-29 has been prepared by sub-committee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
Report on voting
DIS
86B/633/RVD
86B/553/DIS
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
Fibre optic interconnecting
IEC 1300 consists of the following parts, under the general title
devices and passive components – Basic test and measurement procedures:
Part 1: General and guidance
Part 2: Tests
Part 3: Examinations and measurements

---------------------- Page: 3 ----------------------

1300-2-29 © IEC:1995
...