EN 61754-6:2013
(Main)Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family
IEC 61754-2:2013(E) defines the standard interface dimensions for type MU family of connectors. This second edition cancels and replaces the first edition published in 1997 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of standard references; - revision of intermateability. Keywords: standard interface dimensions for type MU family of connectors
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 6: Steckverbinderfamilie der Bauart MU
Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 6: Famille de connecteurs de type MU
L'IEC 61754-6:2013 définit les dimensions d'interfaces normalisées pour la famille de connecteurs de type MU. Cette deuxième édition annule et remplace la première édition parue en 1997 dont elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - ajout de références de normes; - révision de la compatibilité d'accouplement. Mots clés: les dimensions d'interfaces normalisées pour la famille de connecteurs de type MU
Optični spojni elementi in pasivne komponente - Vmesniki optičnih konektorjev - 6. del: Konektorska družina vrste MU (IEC 61754-6:2013)
Ta del standarda IEC 61754 določa standardne dimenzije vmesnikov za konektorsko družino vrste MU.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 6: Bauart MU-SteckverbinderfamilieFibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61754-6:2013SIST EN 61754-6:2014en01-januar-2014SIST EN 61754-6:2014SLOVENSKI
STANDARDSIST EN 61754-6:1999/A2:2005SIST EN 61754-6:1999/A1:2002SIST EN 61754-6:19991DGRPHãþD
EUROPEAN STANDARD EN 61754-6 NORME EUROPÉENNE
EUROPÄISCHE NORM November 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-6:2013 E
ICS 33.180.20 Supersedes EN 61754-6:1997 + A1:2001 + A2:2005
English version
Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces -
Part 6: Type MU connector family (IEC 61754-6:2013)
Dispositifs d'interconnexion et composants passifs à fibres optiques -
Interfaces de connecteurs à fibres optiques (CEI 61754-6:2013)
Lichtwellenleiter -
Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern -
Teil 6: Bauart MU-Steckverbinderfamilie (IEC 61754-6:2013)
This European Standard was approved by CENELEC on 2013-08-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Foreword The text of document 86B/3627/FDIS, future edition 2 of IEC 61754-6, prepared by subcommittee 86B “Fibre optic interconnecting devices and passive components” of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-6:2013. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-05-26 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-08-26
This document supersedes EN 61754-6:1997 + A1:2001 + A2:2005. EN 61754-6:2013 includes the following significant technical changes with respect to EN 61754-6:1997 + A1:2001 + A2:2005 : a) addition of standard references; b) revision of intermateability. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 61754-6:2013 was approved by CENELEC as a European Standard without any modification.
- 3 - EN 61754-6:2013
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 61755-3-1
Fibre optic interconnecting devices and passive components -Fibre optic connector optical interfaces -
Part 3-1:Connectors with 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrule, non-angled single mode non-dispersion shifted fibres prEN 61755-3-11)
IEC 61755-3-2
Fibre optic interconnecting devices and passive components -Fibre optic connector optical interfaces -
Part 3-2: Connectors with 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrule, angled single mode non-dispersion shifted fibres prEN 61755-3-21)
1)
At draft stage. SIST EN 61754-6:2014
IEC 61754-6 Edition 2.0 2013-07 INTERNATIONAL STANDARD Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces –
Part 6: Type MU connector family
INTERNATIONAL ELECTROTECHNICAL COMMISSION XC ICS 33.180.20 PRICE CODE ISBN 978-2-8322-1010-9
– 2 – 61754-6 © IEC:2013(E)
CONTENTS FOREWORD . 5 1 Scope . 7 2 Normative references . 7 3 Description . 7 4 Interfaces . 7 Annex A (informative)
Configuration of type MU-A connector set . 74 Annex B (informative)
Configuration of type MU-B connector set . 75 Annex C (informative)
Floating 2-port connector plug . 76 Bibliography . 77
Figure 1 – Simplex plug connector interface – Push/pull . 11 Figure 2 – 4,5 mm duplex plug connector interface – Push/pull . 14 Figure 3 – Simplex adaptor connector interface – Push/pull . 17 Figure 4 – Gauge pin for resilient alignment sleeve . 19 Figure 5 – 4,5 mm duplex adaptor connector interface – Push/pull . 20 Figure 6 – 8-port adaptor connector interface – Push/pull . 23 Figure 7 – Plug connector interface – For printed board housings . 25 Figure 8 – Sleeve holder interface . 27 Figure 9 – 2-port backplane housing interface. 30 Figure 10 – 2-port printed board housing interface . 34 Figure 11 – 8-port backplane housing interface . 37 Figure 12 – 8-port printed board housing interface . 41 Figure 13 – Simplex active device receptacle interface . 43 Figure 14 – Detail of the mechanical stop for rigid bore alignment feature. 45 Figure 15 – 4,5 mm duplex active device receptacle interface . 46 Figure 16 – Detail of the mechanical stop for rigid bore alignment feature. 48 Figure 17 – 6,25 mm duplex active device receptacle interface . 49 Figure 18 – Detail of the mechanical stop for rigid bore alignment feature. 51 Figure 19 – Plug connector interface for printed board housings, APC . 53 Figure 20 – Simplex plug connector interface – Push/pull, APC . 56 Figure 21 – 4,5 mm duplex plug connector interface – Push/pull, APC . 59 Figure 22 – 6,25 mm duplex plug connector interface – Push/pull, APC . 62 Figure 23 – 6,25 mm duplex plug connector interface – Push/pull . 64 Figure 24 – 6,25 mm duplex adaptor connector interface . 67 Figure 25 – Horizontal duplex plug connector interface – Push/pull . 69 Figure 26 – Horizontal duplex adaptor connector interface . 72 Figure A.1 – Configuration of type MU-A connector set . 74 Figure B.1 – Configuration of type MU-B connector set . 75 Figure C.1 – Floating 2-port connector plug . 76
Table 1 – MU-A connector set . 9 SIST EN 61754-6:2014
61754-6 © IEC:2013(E) – 3 –
Table 2 – MU-B connector set . 9 Table 3 – MU receptacles . 10 Table 4 – Dimensions of the simplex plug connector interface . 12 Table 5 – Grade . 13 Table 6 – Dimensions of the 4,5 mm duplex plug connector interface . 15 Table 7 – Grade . 16 Table 8 – Dimensions of the simplex adaptor connector interface . 18 Table 9 – Grade . 18 Table 10 – Gauge pin dimensions . 19 Table 11 – Dimensions of the 4,5 mm duplex adaptor connector interface . 21 Table 12 – Grade . 22 Table 13 – Dimensions of the 8-port adaptor connector interface . 24 Table 14 – Grade . 24 Table 15 – Dimensions of the plug connector interface . 26 Table 16 – Grade . 26 Table 17 – Dimensions of the sleeve holder interface . 28 Table 18 – Grade . 28 Table 19 – Dimensions of the 2-port backplane housing interface) . 31 Table 20 – Grade . 32 Table 21 – Dimensions of the 2-port printed board housing interface . 35 Table 22 – Dimensions of the 8-port backplane housing interface . 38 Table 23 – Grade . 39 Table 24 – Dimensions of the 8-port printed board housing interface . 42 Table 25 – Dimensions of the simplex active device receptacle interface . 44 Table 26 – Alignment feature grade . 45 Table 27 – Dimensions of the mechanical stop for rigid bore alignment feature . 45 Table 28 – Mechanical stop feature grade. 46 Table 29 – Dimensions of the 4,5 mm duplex active device receptacle interface . 47 Table 30 – Alignment feature grade . 48 Table 31 – Dimensions of the mechanical stop for rigid bore alignment feature . 48 Table 32 – Mechanical stop feature grade. 49 Table 33 – Dimensions of the 6,25 mm duplex active device receptacle interface . 50 Table 34 – Alignment feature grade . 51 Table 35 – Dimensions of the mechanical stop for rigid bore alignment feature . 51 Table 36 – Mechanical stop feature grade. 52 Table 37 – Dimensions of the plug connector interface for printed board housings, APC . 54 Table 38 – Dimensions of the simplex plug connector interfaces, APC . 57 Table 39 – Dimensions of the 4,5 mm duplex plug connector interfaces, APC . 60 Table 40 – Dimensions of the 6,25 mm duplex plug connector interface, APC. 63 Table 41 –
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.