EN 60068-2-55:2013

Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce

IEC 60068-2-55:2013 provides a standard procedure for determining the ability of a specimen to withstand specified severities of bounce, e. g. when transported as loose cargo on wheeled vehicles. This second edition cancels and replaces the first edition, published in 1987, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: This new edition allows for loose cargo testing in a more general sense. The test is no longer aligned with a special testing machine but allows for use of any suitable equipment such as electrodynamic or servo-hydraulic shaker tables. Moreover, sinusoidal and random vibration can be used. The previous rotation table motions are included in Annex A as historical methods.

Umgebungseinflüsse - Teil 2-55: Prüfverfahren - Prüfung Ee und Leitfaden: Prüfung loser Packstücke einschließlich Prellen

Essais d’environnement - Partie 2-55: Essais - Essai Ee et guide - Essais de chargement sans arrimage y compris l’essai de rebondissement

La CEI 60068-2-55:2013 fournit une procédure normalisée permettant de déterminer l'aptitude d'un spécimen à résister à des sévérités spécifiées de rebondissement, lorsqu'il est transporté par exemple sans arrimage sur des véhicules à roues. Cette deuxième édition annule et remplace la première édition, publiée en 1987. Elle constitue une révision technique. Les modifications principales par rapport à l'édition précédente sont les suivantes: Cette nouvelle édition prévoit des essais de chargement sans arrimage dans un sens plus général. L'essai n'est plus conduit à l'aide d'un appareil spécial d'essai mais permet d'utiliser tout matériel approprié tel que les tables vibrantes électrodynamiques ou servo-hydrauliques. De plus, les vibrations sinusoïdales et aléatoires peuvent être utilisées. Les mouvements antérieurs de la table de rotation sont inclus dans l'Annexe A à titre de méthodes historiques.

Okoljsko preskušanje - 2-55. del: Preskusi - Preskus Ee in navodilo: Preskušanje nepritrjenega tovora, vključno s premetavanjem

Ta del IEC 60068 ponuja standardni postopek za določanje sposobnosti vzorca za vzdržljivost določenih stopenj premetavanja, npr. pri prevažanju kot neprivezan tovor na vozilih s kolesi. Ta test je zlasti namenjen vzorcem, pripravljenim za prevoz, vključno z vzorci v transportnem ohišju, pri čemer se slednji obravnava kot del samega vzorca ali embalaže. Ta test se ne sme uporabljati kot test nizkofrekvenčnih vibracij. Čeprav je primarno namenjen elektrotehničnim izdelkom, ta standard ni omejen nanje in se lahko poljubno uporablja na drugih področjih.

General Information

• Status: Published
• Publication Date: 02-May-2013
• Withdrawal Date: 12-Mar-2016
• ICS: 19.040 - Environmental testing
• ICS: 29.020 - Electrical engineering in general
• Technical Committee: CLC/SR 104 - Environmental conditions, classification and methods of test
• Drafting Committee: IEC/TC 104 - IEC_TC_104
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-May-2013
• Completion Date: 03-May-2013
• Ref Project: SIST EN 60068-2-55:2013 - Environmental testing - Part 2-55: Tests - Test Ee and guidance: Loose cargo testing including Bounce

Relations

• Replaces: EN 60068-2-55:1993 - Basic environmental testing procedures - Part 2-55: Tests - Test Ee and guidance: Bounce
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2013
2NROMVNRSUHVNXãDQMHGHO3UHVNXVL3UHVNXV(HLQQDYRGLOR3UHVNXãDQMH
QHSULWUMHQHJDWRYRUDYNOMXþQRVSUHPHWDYDQMHP
Environmental testing - Part 2-55: Tests - Test Ee and guidance: Loose cargo testing
including Bounce
Umgebungseinflüsse - Teil 2-55: Prüfverfahren - Prüfung Ee und Leitfaden: Prüfung
loser Packstücke einschließlich Prellen
Ta slovenski standard je istoveten z: EN 60068-2-55:2013
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60068-2-55
NORME EUROPÉENNE
May 2013
EUROPÄISCHE NORM
ICS 19.040; 29.020 Supersedes EN 60068-2-55:1993

English version
Environmental testing -
Part 2-55: Tests -
Test Ee and guidance -
Loose cargo testing including bounce
(IEC 60068-2-55:2013)
Essais d’environnement -  Umgebungseinflüsse -
Partie 2-55: Essais - Teil 2-55: Prüfverfahren -
Essai Ee et guide - Prüfung Ee und Leitfaden: Prüfung loser
Essais de chargement sans arrimage y Packstücke einschließlich Prellen
compris l’essai de rebondissement (IEC 60068-2-55:2013)
(CEI 60068-2-55:2013)
This European Standard was approved by CENELEC on 2013-03-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60068-2-55:2013 E
Foreword
The text of document 104/592/FDIS, future edition 2 of IEC 60068-2-55, prepared by IEC TC 104
"Environmental conditions, classification and methods of test" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60068-2-55:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2013-12-13
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-03-13
• latest date by which the national
standards conflicting with the

document have to be withdrawn
This document supersedes EN 60068-2-55:1993.
55:1993:
This new edition allows for loose cargo testing in a more general sense. The test is no longer aligned with
a special testing machine but allows for use of any suitable equipment such as electrodynamic or servo-
hydraulic shaker tables. Moreover, sinusoidal and random vibration can be used. The previous rotation
table motions are included in Annex A as historical methods.
This standard should be used in conjunction with EN 60068-1.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60068-2-55:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-27 NOTE  Harmonized as EN 60068-2-27.
IEC 60068-2-31 NOTE  Harmonized as EN 60068-2-31.
IEC 60068-5-2 NOTE  Harmonized as EN 60068-5-2.
ISO/IEC 17025 NOTE  Harmonized as EN ISO/IEC 17025.

- 3 - EN 60068-2-55:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60068-1 - Environmental testing - EN 60068-1 -
Part 1: General and guidance
IEC 60068-2-6 - Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60068-2-64 - Environmental testing - EN 60068-2-64 -
Part 2-64: Tests - Test Fh: Vibration,
broadband random and guidance
IEC 60068-2-80 - Environmental testing - EN 60068-2-80 -
Part 2-80: Tests - Test Fi: Vibration - Mixed
mode
ISO 13355 - Packaging - Complete, filled transport EN ISO 13355 -
packages and unit loads - Vertical random
vibration test
ASTM D4169-09 - Standard Practice for Performance Testing of - -
Shipping Containers and Systems

IEC 60068-2-55 ®
Edition 2.0 2013-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BASIC SAFETY PUBLICATION
PUBLICATION FONDAMENTALE DE SÉCURITÉ

Environmental testing –
Part 2-55: Tests – Test Ee and guidance – Loose cargo testing including bounce

Essais d’environnement –
Partie 2-55: Essais – Essai Ee et guide – Essais de chargement sans arrimage y

compris l’essai de rebondissement

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 19.040; 29.020 ISBN 978-2-83220-644-7

– 2 – 60068-2-55 © IEC:2013
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements for the test apparatus . 7
4.1 General test description . 7
4.2 Characteristics of the testing machine . 7
4.3 Motion of the platform . 7
4.4 Tolerances on the horizontal accuracy of platform . 8
4.5 Control . 8
4.6 Mounting . 8
4.7 Horizontal motion of specimen. 8
5 Severities . 8
5.1 Severity for sinusoidal motion of the platform . 8
5.2 Severity for random motion of the platform . 9
5.3 Severity for mixed mode motion of the platform . 9
5.4 Severity for use of special bounce testing machines . 9
6 Preconditioning . 9
7 Initial measurements and functional performance test . 9
8 Testing . 9
9 Recovery . 10
10 Final measurements . 10
11 Information to be given in the relevant specification. 11
12 Information to be given in the test report . 11
Annex A (normative) Guidance . 12
Annex B (informative) Comparison amongst impact tests . 17
Bibliography . 18

Figure A.1 – Typical arrangement of barriers and typical reference point positions . 13
Figure A.2 – Basic drive motion of a mechanical bounce tester . 14

Table B.1 – Comparison of different impact tests . 17

60068-2-55 © IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENVIRONMENTAL TESTING –
Part 2-55: Tests – Test Ee and guidance –
Loose cargo testing including bounce

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held respon
...