ETSI EN 300 328 V2.2.0 (2017-11)
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum
REN/ERM-TG11-12
Širokopasovni prenosni sistemi - Oprema za prenos podatkov v frekvenčnem pasu 2,4 GHz - Harmonizirani standard za dostop do radijskega spektra
Ta dokument se uporablja za opremo za širokopasovni prenos podatkov. Ta dokument opisuje tudi zahteve za dostop do spektra, ki omogočajo lažje deljenje spektra z drugo opremo. Oprema za širokopasovni prenos podatkov, ki je obravnavana v tem dokumentu, se uporablja v skladu z dodatkom 3 k priporočilu ERC 70-03 [i.6] ali odločbo Komisije 2006/771/ES [i.7] (in njenimi spremembami). Ta dokument ne obravnava opreme, ki uporablja ultra širokopasovno (UWB) tehnologijo.
OPOMBA: Razmerje med tem dokumentom in bistvenimi zahtevami člena 3.2 Direktive 2014/53/EU [i.1] je podano v dodatku A.
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 300 328 V2.2.2:2020
01-januar-2020
Širokopasovni prenosni sistemi - Oprema za prenos podatkov v frekvenčnem pasu
2,4 GHz - Harmonizirani standard za dostop do radijskega spektra
Wideband transmission systems - Data transmission equipment operating in the 2,4 GHz
band - Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 300 328 V2.2.2 (2019-07)
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
SIST EN 300 328 V2.2.2:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 300 328 V2.2.2:2020
---------------------- Page: 2 ----------------------
SIST EN 300 328 V2.2.2:2020
ETSI EN 300 328 V2.2.2 (2019-07)
HARMONISED EUROPEAN STANDARD
Wideband transmission systems;
Data transmission equipment operating in the 2,4 GHz band;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
SIST EN 300 328 V2.2.2:2020
2 ETSI EN 300 328 V2.2.2 (2019-07)
Reference
REN/ERM-TG11-12
Keywords
broadband, data, harmonised standard, LAN,
mobile, radio, regulation, spread spectrum, SRD,
testing, transmission, UHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 328 V2.2.2:2020
3 ETSI EN 300 328 V2.2.2 (2019-07)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 14
4.1 Environmental profile . 14
4.2 Equipment types . 15
4.2.1 Wideband Data Transmission equipment types . 15
4.2.2 Adaptive and non-adaptive equipment . 15
4.2.3 Receiver categories . 15
4.2.3.1 Introduction . 15
4.2.3.2 Categorization . 15
4.2.3.2.1 Receiver category 1 . 15
4.2.3.2.2 Receiver category 2 . 16
4.2.3.2.3 Receiver category 3 . 16
4.2.4 Antenna types . 16
4.3 Conformance requirements . 16
4.3.1 Requirements for Frequency Hopping (FHSS) equipment . 16
4.3.1.1 Introduction . 16
4.3.1.2 RF output power . 16
4.3.1.2.1 Applicability . 16
4.3.1.2.2 Definition. 16
4.3.1.2.3 Limit . 16
4.3.1.2.4 Conformance . 17
4.3.1.3 Duty Cycle, Tx-sequence, Tx-gap . 17
4.3.1.3.1 Applicability . 17
4.3.1.3.2 Definition. 17
4.3.1.3.3 Limit . 17
4.3.1.3.4 Conformance . 17
4.3.1.4 Accumulated Transmit Time, Frequency Occupation and Hopping Sequence . 17
4.3.1.4.1 Applicability . 17
4.3.1.4.2 Definition. 18
4.3.1.4.3 Limit . 18
4.3.1.4.4 Conformance . 19
4.3.1.5 Hopping Frequency Separation . 19
4.3.1.5.1 Applicability . 19
4.3.1.5.2 Definition. 19
4.3.1.5.3 Limit . 19
4.3.1.5.4 Conformance . 20
4.3.1.6 Medium Utilization (MU) factor . 20
4.3.1.6.1 Applicability . 20
4.3.1.6.2 Definition. 20
4.3.1.6.3 Limit . 20
4.3.1.6.4 Conformance . 20
4.3.1.7 Adaptivity (Adaptive FHSS) . 20
4.3.1.7.1 Applicability . 20
ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 328 V2.2.2:2020
4 ETSI EN 300 328 V2.2.2 (2019-07)
4.3.1.7.2 Adaptive FHSS using LBT . 21
4.3.1.7.3 Adaptive FHSS using DAA . 22
4.3.1.7.4 Short Control Signalling Transmissions . 23
4.3.1.8 Occupied Channel Bandwidth . 24
4.3.1.8.1 Applicability . 24
4.3.1.8.2 Definition. 24
4.3.1.8.3 Limits . 24
4.3.1.8.4 Conformance . 24
4.3.1.9 Transmitter unwanted emissions in the out-of-band domain . 24
4.3.1.9.1 Applicability . 24
4.3.1.9.2 Definition. 24
4.3.1.9.3 Limit . 24
4.3.1.9.4 Conformance . 25
4.3.1.10 Transmitter unwanted emissions in the spurious domain . 25
4.3.1.10.1 Applicability . 25
4.3.1.10.2 Definition. 25
4.3.1.10.3 Limit . 25
4.3.1.10.4 Conformance . 25
4.3.1.11 Receiver spurious emissions . 25
4.3.1.11.1 Applicability . 25
4.3.1.11.2 Definition. 25
4.3.1.11.3 Limit . 25
4.3.1.11.4 Conformance . 26
4.3.1.12 Receiver Blocking . 26
4.3.1.12.1 Applicability . 26
4.3.1.12.2 Definition. 26
4.3.1.12.3 Performance Criteria . 26
4.3.1.12.4 Limits . 26
4.3.1.12.5 Conformance . 28
4.3.1.13 Geo-location capability . 28
4.3.1.13.1 Applicability . 28
4.3.1.13.2 Definition. 28
4.3.1.13.3 Requirements . 28
4.3.2 Requirements for other types of Wideband Data Transmission equipment (non-FHSS equipment) . 28
4.3.2.1 Introduction . 28
4.3.2.2 RF output power . 29
4.3.2.2.1 Applicability . 29
4.3.2.2.2 Definition. 29
4.3.2.2.3 Limit . 29
4.3.2.2.4 Conformance . 29
4.3.2.3 Power Spectral Density . 29
4.3.2.3.1 Applicability . 29
4.3.2.3.2 Definition. 29
4.3.2.3.3 Limit . 29
4.3.2.3.4 Conformance . 29
4.3.2.4 Duty Cycle, Tx-sequence, Tx-gap . 29
4.3.2.4.1 Applicability . 29
4.3.2.4.2 Definition. 30
4.3.2.4.3 Limit . 30
4.3.2.4.4 Conformance . 30
4.3.2.5 Medium Utilization (MU) factor . 30
4.3.2.5.1 Applicability . 30
4.3.2.5.2 Definition. 30
4.3.2.5.3 Limit . 31
4.3.2.5.4 Conformance . 31
4.3.2.6 Adaptivity (non-FHSS) . 31
4.3.2.6.1 Applicability . 31
4.3.2.6.2 Adaptive non-FHSS using DAA . 31
4.3.2.6.3 Adaptive non-FHSS using LBT . 32
4.3.2.6.4 Short Control Signalling Transmissions . 35
4.3.2.7 Occupied Channel Bandwidth . 35
4.3.2.7.1 Applicability . 35
ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 328 V2.2.2:2020
5 ETSI EN 300 328 V2.2.2 (2019-07)
4.3.2.7.2 Definition. 35
4.3.2.7.3 Limits . 35
4.3.2.7.4 Conformance . 36
4.3.2.8 Transmitter unwanted emissions in the out-of-band domain . 36
4.3.2.8.1 Applicability . 36
4.3.2.8.2 Definition. 36
4.3.2.8.3 Limit . 36
4.3.2.8.4 Conformance . 36
4.3.2.9 Transmitter unwanted emissions in the spurious domain . 36
4.3.2.9.1 Applicability . 36
4.3.2.9.2 Definition. 36
4.3.2.9.3 Limit . 37
4.3.2.9.4 Conformance . 37
4.3.2.10 Receiver spurious emissions . 37
4.3.2.10.1 Applicability . 37
4.3.2.10.2 Definition. 37
4.3.2.10.3 Limit . 37
4.3.2.10.4 Conformance . 37
4.3.2.11 Receiver Blocking . 37
4.3.2.11.1 Applicability . 37
4.3.2.11.2 Definition. 38
4.3.2.11.3 Performance Criteria . 38
4.3.2.11.4 Limits . 38
4.3.2.11.5 Conformance . 39
4.3.2.12 Geo-location capability . 39
4.3.2.12.1 Applicability . 39
4.3.2.12.2 Definition. 40
4.3.2.12.3 Requirements . 40
5 Testing for compliance with technical requirements . 40
5.1 Environmental conditions for testing . 40
5.1.1 Introduction. 40
5.1.2 Normal test conditions . 40
5.1.2.1 Normal temperature and humidity . 40
5.1.2.2 Normal power source . 40
5.1.3 Extreme test conditions . 40
5.2 Void . 40
5.3 Definition of other test conditions . 41
5.3.1 Test mode. 41
5.3.2 Antennas and transmit operating modes . 41
5.3.2.1 Integrated and dedicated antennas . 41
5.3.2.2 Smart antenna systems and related operating modes . 41
5.3.2.2.1 Introduction . 41
5.3.2.2.2 Operating mode 1 (single antenna) . 41
5.3.2.2.3 Operating mode 2 (multiple antennas, no beamforming) . 41
5.3.2.2.4 Operating mode 3 (multiple antennas, with beamforming) . 42
5.3.2.3 Configuration for testing . 42
5.3.3 Adaptive and Non-adaptive equipment. 42
5.3.4 Presentation of equipment . 42
5.3.5 Conducted measurements, radiated measurements, relative measurements . 42
5.4 Test procedures for essential radio test suites. 42
...
ETSI EN 300 328 V2.2.2 (2019-07)
HARMONISED EUROPEAN STANDARD
Wideband transmission systems;
Data transmission equipment operating in the 2,4 GHz band;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 ETSI EN 300 328 V2.2.2 (2019-07)
Reference
REN/ERM-TG11-12
Keywords
broadband, data, harmonised standard, LAN,
mobile, radio, regulation, spread spectrum, SRD,
testing, transmission, UHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 300 328 V2.2.2 (2019-07)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 14
4.1 Environmental profile . 14
4.2 Equipment types . 15
4.2.1 Wideband Data Transmission equipment types . 15
4.2.2 Adaptive and non-adaptive equipment . 15
4.2.3 Receiver categories . 15
4.2.3.1 Introduction . 15
4.2.3.2 Categorization . 15
4.2.3.2.1 Receiver category 1 . 15
4.2.3.2.2 Receiver category 2 . 16
4.2.3.2.3 Receiver category 3 . 16
4.2.4 Antenna types . 16
4.3 Conformance requirements . 16
4.3.1 Requirements for Frequency Hopping (FHSS) equipment . 16
4.3.1.1 Introduction . 16
4.3.1.2 RF output power . 16
4.3.1.2.1 Applicability . 16
4.3.1.2.2 Definition. 16
4.3.1.2.3 Limit . 16
4.3.1.2.4 Conformance . 17
4.3.1.3 Duty Cycle, Tx-sequence, Tx-gap . 17
4.3.1.3.1 Applicability . 17
4.3.1.3.2 Definition. 17
4.3.1.3.3 Limit . 17
4.3.1.3.4 Conformance . 17
4.3.1.4 Accumulated Transmit Time, Frequency Occupation and Hopping Sequence . 17
4.3.1.4.1 Applicability . 17
4.3.1.4.2 Definition. 18
4.3.1.4.3 Limit . 18
4.3.1.4.4 Conformance . 19
4.3.1.5 Hopping Frequency Separation . 19
4.3.1.5.1 Applicability . 19
4.3.1.5.2 Definition. 19
4.3.1.5.3 Limit . 19
4.3.1.5.4 Conformance . 20
4.3.1.6 Medium Utilization (MU) factor . 20
4.3.1.6.1 Applicability . 20
4.3.1.6.2 Definition. 20
4.3.1.6.3 Limit . 20
4.3.1.6.4 Conformance . 20
4.3.1.7 Adaptivity (Adaptive FHSS) . 20
4.3.1.7.1 Applicability . 20
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 300 328 V2.2.2 (2019-07)
4.3.1.7.2 Adaptive FHSS using LBT . 21
4.3.1.7.3 Adaptive FHSS using DAA . 22
4.3.1.7.4 Short Control Signalling Transmissions . 23
4.3.1.8 Occupied Channel Bandwidth . 24
4.3.1.8.1 Applicability . 24
4.3.1.8.2 Definition. 24
4.3.1.8.3 Limits . 24
4.3.1.8.4 Conformance . 24
4.3.1.9 Transmitter unwanted emissions in the out-of-band domain . 24
4.3.1.9.1 Applicability . 24
4.3.1.9.2 Definition. 24
4.3.1.9.3 Limit . 24
4.3.1.9.4 Conformance . 25
4.3.1.10 Transmitter unwanted emissions in the spurious domain . 25
4.3.1.10.1 Applicability . 25
4.3.1.10.2 Definition. 25
4.3.1.10.3 Limit . 25
4.3.1.10.4 Conformance . 25
4.3.1.11 Receiver spurious emissions . 25
4.3.1.11.1 Applicability . 25
4.3.1.11.2 Definition. 25
4.3.1.11.3 Limit . 25
4.3.1.11.4 Conformance . 26
4.3.1.12 Receiver Blocking . 26
4.3.1.12.1 Applicability . 26
4.3.1.12.2 Definition. 26
4.3.1.12.3 Performance Criteria . 26
4.3.1.12.4 Limits . 26
4.3.1.12.5 Conformance . 28
4.3.1.13 Geo-location capability . 28
4.3.1.13.1 Applicability . 28
4.3.1.13.2 Definition. 28
4.3.1.13.3 Requirements . 28
4.3.2 Requirements for other types of Wideband Data Transmission equipment (non-FHSS equipment) . 28
4.3.2.1 Introduction . 28
4.3.2.2 RF output power . 29
4.3.2.2.1 Applicability . 29
4.3.2.2.2 Definition. 29
4.3.2.2.3 Limit . 29
4.3.2.2.4 Conformance . 29
4.3.2.3 Power Spectral Density . 29
4.3.2.3.1 Applicability . 29
4.3.2.3.2 Definition. 29
4.3.2.3.3 Limit . 29
4.3.2.3.4 Conformance . 29
4.3.2.4 Duty Cycle, Tx-sequence, Tx-gap . 29
4.3.2.4.1 Applicability . 29
4.3.2.4.2 Definition. 30
4.3.2.4.3 Limit . 30
4.3.2.4.4 Conformance . 30
4.3.2.5 Medium Utilization (MU) factor . 30
4.3.2.5.1 Applicability . 30
4.3.2.5.2 Definition. 30
4.3.2.5.3 Limit . 31
4.3.2.5.4 Conformance . 31
4.3.2.6 Adaptivity (non-FHSS) . 31
4.3.2.6.1 Applicability . 31
4.3.2.6.2 Adaptive non-FHSS using DAA . 31
4.3.2.6.3 Adaptive non-FHSS using LBT . 32
4.3.2.6.4 Short Control Signalling Transmissions . 35
4.3.2.7 Occupied Channel Bandwidth . 35
4.3.2.7.1 Applicability . 35
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 300 328 V2.2.2 (2019-07)
4.3.2.7.2 Definition. 35
4.3.2.7.3 Limits . 35
4.3.2.7.4 Conformance . 36
4.3.2.8 Transmitter unwanted emissions in the out-of-band domain . 36
4.3.2.8.1 Applicability . 36
4.3.2.8.2 Definition. 36
4.3.2.8.3 Limit . 36
4.3.2.8.4 Conformance . 36
4.3.2.9 Transmitter unwanted emissions in the spurious domain . 36
4.3.2.9.1 Applicability . 36
4.3.2.9.2 Definition. 36
4.3.2.9.3 Limit . 37
4.3.2.9.4 Conformance . 37
4.3.2.10 Receiver spurious emissions . 37
4.3.2.10.1 Applicability . 37
4.3.2.10.2 Definition. 37
4.3.2.10.3 Limit . 37
4.3.2.10.4 Conformance . 37
4.3.2.11 Receiver Blocking . 37
4.3.2.11.1 Applicability . 37
4.3.2.11.2 Definition. 38
4.3.2.11.3 Performance Criteria . 38
4.3.2.11.4 Limits . 38
4.3.2.11.5 Conformance . 39
4.3.2.12 Geo-location capability . 39
4.3.2.12.1 Applicability . 39
4.3.2.12.2 Definition. 40
4.3.2.12.3 Requirements . 40
5 Testing for compliance with technical requirements . 40
5.1 Environmental conditions for testing . 40
5.1.1 Introduction. 40
5.1.2 Normal test conditions . 40
5.1.2.1 Normal temperature and humidity . 40
5.1.2.2 Normal power source . 40
5.1.3 Extreme test conditions . 40
5.2 Void . 40
5.3 Definition of other test conditions . 41
5.3.1 Test mode. 41
5.3.2 Antennas and transmit operating modes . 41
5.3.2.1 Integrated and dedicated antennas . 41
5.3.2.2 Smart antenna systems and related operating modes . 41
5.3.2.2.1 Introduction . 41
5.3.2.2.2 Operating mode 1 (single antenna) . 41
5.3.2.2.3 Operating mode 2 (multiple antennas, no beamforming) . 41
5.3.2.2.4 Operating mode 3 (multiple antennas, with beamforming) . 42
5.3.2.3 Configuration for testing . 42
5.3.3 Adaptive and Non-adaptive equipment. 42
5.3.4 Presentation of equipment . 42
5.3.5 Conducted measurements, radiated measurements, relative measurements . 42
5.4 Test procedures for essential radio test suites. 42
5.4.1 Product Information . 42
5.4.2 RF output power, Duty Cycle, Tx-sequence, Tx-gap, Medium Utilization . 44
5.4.2.1 Test conditions . 44
5.4.2.2 Test method . 44
5.4.2.2.1 Conducted measurements . 44
5.4.2.2.2 Radiated measurements . 46
5.4.3 Power Spectral Densit
...
Final draft ETSI EN 300 328 V2.2.1 (2019-04)
HARMONISED EUROPEAN STANDARD
Wideband transmission systems;
Data transmission equipment operating in the 2,4 GHz band;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 300 328 V2.2.1 (2019-04)
Reference
REN/ERM-TG11-12
Keywords
broadband, data, harmonised standard, LAN,
mobile, radio, regulation, spread spectrum, SRD,
testing, transmission, UHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 300 328 V2.2.1 (2019-04)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 14
4.1 Environmental profile . 14
4.2 Equipment types . 15
4.2.1 Wideband Data Transmission equipment types . 15
4.2.2 Adaptive and non-adaptive equipment . 15
4.2.3 Receiver categories . 15
4.2.3.1 Introduction . 15
4.2.3.2 Categorization . 15
4.2.3.2.1 Receiver category 1 . 15
4.2.3.2.2 Receiver category 2 . 16
4.2.3.2.3 Receiver category 3 . 16
4.2.4 Antenna types . 16
4.3 Conformance requirements . 16
4.3.1 Requirements for Frequency Hopping (FHSS) equipment . 16
4.3.1.1 Introduction . 16
4.3.1.2 RF output power . 16
4.3.1.2.1 Applicability . 16
4.3.1.2.2 Definition. 16
4.3.1.2.3 Limit . 16
4.3.1.2.4 Conformance . 17
4.3.1.3 Duty Cycle, Tx-sequence, Tx-gap . 17
4.3.1.3.1 Applicability . 17
4.3.1.3.2 Definition. 17
4.3.1.3.3 Limit . 17
4.3.1.3.4 Conformance . 17
4.3.1.4 Accumulated Transmit Time, Frequency Occupation and Hopping Sequence . 17
4.3.1.4.1 Applicability . 17
4.3.1.4.2 Definition. 18
4.3.1.4.3 Limit . 18
4.3.1.4.4 Conformance . 19
4.3.1.5 Hopping Frequency Separation . 19
4.3.1.5.1 Applicability . 19
4.3.1.5.2 Definition. 19
4.3.1.5.3 Limit . 19
4.3.1.5.4 Conformance . 20
4.3.1.6 Medium Utilization (MU) factor . 20
4.3.1.6.1 Applicability . 20
4.3.1.6.2 Definition. 20
4.3.1.6.3 Limit . 20
4.3.1.6.4 Conformance . 20
4.3.1.7 Adaptivity (Adaptive FHSS) . 20
4.3.1.7.1 Applicability . 20
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 300 328 V2.2.1 (2019-04)
4.3.1.7.2 Adaptive FHSS using LBT . 21
4.3.1.7.3 Adaptive FHSS using DAA . 22
4.3.1.7.4 Short Control Signalling Transmissions . 23
4.3.1.8 Occupied Channel Bandwidth . 24
4.3.1.8.1 Applicability . 24
4.3.1.8.2 Definition. 24
4.3.1.8.3 Limits . 24
4.3.1.8.4 Conformance . 24
4.3.1.9 Transmitter unwanted emissions in the out-of-band domain . 24
4.3.1.9.1 Applicability . 24
4.3.1.9.2 Definition. 24
4.3.1.9.3 Limit . 24
4.3.1.9.4 Conformance . 25
4.3.1.10 Transmitter unwanted emissions in the spurious domain . 25
4.3.1.10.1 Applicability . 25
4.3.1.10.2 Definition. 25
4.3.1.10.3 Limit . 25
4.3.1.10.4 Conformance . 25
4.3.1.11 Receiver spurious emissions . 25
4.3.1.11.1 Applicability . 25
4.3.1.11.2 Definition. 25
4.3.1.11.3 Limit . 25
4.3.1.11.4 Conformance . 26
4.3.1.12 Receiver Blocking . 26
4.3.1.12.1 Applicability . 26
4.3.1.12.2 Definition. 26
4.3.1.12.3 Performance Criteria . 26
4.3.1.12.4 Limits . 26
4.3.1.12.5 Conformance . 28
4.3.1.13 Geo-location capability . 28
4.3.1.13.1 Applicability . 28
4.3.1.13.2 Definition. 28
4.3.1.13.3 Requirements . 28
4.3.2 Requirements for other types of Wideband Data Transmission equipment (non-FHSS equipment) . 28
4.3.2.1 Introduction . 28
4.3.2.2 RF output power . 29
4.3.2.2.1 Applicability . 29
4.3.2.2.2 Definition. 29
4.3.2.2.3 Limit . 29
4.3.2.2.4 Conformance . 29
4.3.2.3 Power Spectral Density . 29
4.3.2.3.1 Applicability . 29
4.3.2.3.2 Definition. 29
4.3.2.3.3 Limit . 29
4.3.2.3.4 Conformance . 29
4.3.2.4 Duty Cycle, Tx-sequence, Tx-gap . 29
4.3.2.4.1 Applicability . 29
4.3.2.4.2 Definition. 30
4.3.2.4.3 Limit . 30
4.3.2.4.4 Conformance . 30
4.3.2.5 Medium Utilization (MU) factor . 30
4.3.2.5.1 Applicability . 30
4.3.2.5.2 Definition. 30
4.3.2.5.3 Limit . 31
4.3.2.5.4 Conformance . 31
4.3.2.6 Adaptivity (non-FHSS) . 31
4.3.2.6.1 Applicability . 31
4.3.2.6.2 Adaptive non-FHSS using DAA . 31
4.3.2.6.3 Adaptive non-FHSS using LBT . 32
4.3.2.6.4 Short Control Signalling Transmissions . 35
4.3.2.7 Occupied Channel Bandwidth . 35
4.3.2.7.1 Applicability . 35
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 300 328 V2.2.1 (2019-04)
4.3.2.7.2 Definition. 35
4.3.2.7.3 Limits . 35
4.3.2.7.4 Conformance . 36
4.3.2.8 Transmitter unwanted emissions in the out-of-band domain . 36
4.3.2.8.1 Applicability . 36
4.3.2.8.2 Definition. 36
4.3.2.8.3 Limit . 36
4.3.2.8.4 Conformance . 36
4.3.2.9 Transmitter unwanted emissions in the spurious domain . 36
4.3.2.9.1 Applicability . 36
4.3.2.9.2 Definition. 36
4.3.2.9.3 Limit . 37
4.3.2.9.4 Conformance . 37
4.3.2.10 Receiver spurious emissions . 37
4.3.2.10.1 Applicability . 37
4.3.2.10.2 Definition. 37
4.3.2.10.3 Limit . 37
4.3.2.10.4 Conformance . 37
4.3.2.11 Receiver Blocking . 37
4.3.2.11.1 Applicability . 37
4.3.2.11.2 Definition. 38
4.3.2.11.3 Performance Criteria . 38
4.3.2.11.4 Limits . 38
4.3.2.11.5 Conformance . 39
4.3.2.12 Geo-location capability . 39
4.3.2.12.1 Applicability . 39
4.3.2.12.2 Definition. 40
4.3.2.12.3 Requirements . 40
5 Testing for compliance with technical requirements . 40
5.1 Environmental conditions for testing . 40
5.1.1 Introduction. 40
5.1.2 Normal test conditions . 40
5.1.2.1 Normal temperature and humidity . 40
5.1.2.2 Normal power source . 40
5.1.3 Extreme test conditions . 40
5.2 Void . 40
5.3 Definition of other test conditions . 41
5.3.1 Test mode. 41
5.3.2 Antennas and transmit operating modes . 41
5.3.2.1 Integrated and dedicated antennas . 41
5.3.2.2 Smart antenna systems and related operating modes . 41
5.3.2.2.1 Introduction . 41
5.3.2.2.2 Operating mode 1 (single antenna) . 41
5.3.2.2.3 Operating mode 2 (multiple antennas, no beamforming) . 41
5.3.2.2.4 Operating mode 3 (multiple antennas, with beamforming) . 42
5.3.2.3 Configuration for testing . 42
5.3.3 Adaptive and Non-adaptive equipment. 42
5.3.4 Presentation of equipment . 42
5.3.5 Conducted measurements, radiated measurements, relative measurements . 42
5.4 Test procedures for essential radio test suites. 42
5.4.1 Product Information . 42
5.4.2 RF output power, Duty Cycle, Tx-sequence, Tx-gap, Medium Utilization . 44
5.4.2.1 Test conditions . 44
5.4.2.2 Test method . 44
5.4.2.2.1 Conducted measurements . 44
5.4.2.2.2 Radiated measurements .
...
Draft ETSI EN 300 328 V2.2.0 (2017-11)
HARMONISED EUROPEAN STANDARD
Wideband transmission systems;
Data transmission equipment operating
in the 2,4 GHz ISM band and
using wide band modulation techniques;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 300 328 V2.2.0 (2017-11)
Reference
REN/ERM-TG11-12
Keywords
broadband, data, harmonised standard, ISM,
LAN, mobile, radio, regulation, spread spectrum,
SRD, testing, transmission, UHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 300 328 V2.2.0 (2017-11)
Contents
Intellectual Property Rights . 9
Foreword . 9
Modal verbs terminology . 9
Introduction . 10
1 Scope . 11
2 References . 11
2.1 Normative references . 11
2.2 Informative references . 11
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 14
3.3 Abbreviations . 15
4 Technical requirements specifications . 16
4.1 Environmental profile . 16
4.2 Equipment types . 16
4.2.1 Wide Band Data Transmission equipment types . 16
4.2.2 Adaptive and non-adaptive equipment . 16
4.2.3 Receiver categories . 16
4.2.3.1 Introduction . 16
4.2.3.2 Categorization . 17
4.2.3.2.1 Receiver category 1 . 17
4.2.3.2.2 Receiver category 2 . 17
4.2.3.2.3 Receiver category 3 . 17
4.3 Conformance requirements . 17
4.3.1 Requirements for Frequency Hopping (FHSS) equipment . 17
4.3.1.1 Introduction . 17
4.3.1.2 RF output power . 17
4.3.1.2.1 Applicability . 17
4.3.1.2.2 Definition. 17
4.3.1.2.3 Limit . 17
4.3.1.2.4 Conformance . 17
4.3.1.3 Duty Cycle, Tx-sequence, Tx-gap . 18
4.3.1.3.1 Applicability . 18
4.3.1.3.2 Definition. 18
4.3.1.3.3 Limit . 18
4.3.1.3.4 Conformance . 18
4.3.1.4 Accumulated Transmit Time, Frequency Occupation and Hopping Sequence . 18
4.3.1.4.1 Applicability . 18
4.3.1.4.2 Definition. 18
4.3.1.4.3 Limit . 19
4.3.1.4.4 Other Requirements . 19
4.3.1.4.5 Conformance . 20
4.3.1.5 Hopping Frequency Separation . 20
4.3.1.5.1 Applicability . 20
4.3.1.5.2 Definition. 20
4.3.1.5.3 Limit . 20
4.3.1.5.4 Conformance . 20
4.3.1.6 Medium Utilization (MU) factor . 20
4.3.1.6.1 Applicability . 20
4.3.1.6.2 Definition. 21
4.3.1.6.3 Limit . 21
4.3.1.6.4 Conformance . 21
4.3.1.7 Adaptivity (Adaptive FHSS) . 21
4.3.1.7.1 Applicability . 21
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 300 328 V2.2.0 (2017-11)
4.3.1.7.2 Adaptive FHSS using LBT based DAA . 21
4.3.1.7.3 Adaptive FHSS using other forms of DAA (non-LBT based). 23
4.3.1.7.4 Short Control Signalling Transmissions . 24
4.3.1.8 Occupied Channel Bandwidth . 24
4.3.1.8.1 Applicability . 24
4.3.1.8.2 Definition. 24
4.3.1.8.3 Limits . 25
4.3.1.8.4 Conformance . 25
4.3.1.9 Transmitter unwanted emissions in the out-of-band domain . 25
4.3.1.9.1 Applicability . 25
4.3.1.9.2 Definition. 25
4.3.1.9.3 Limit . 25
4.3.1.9.4 Conformance . 25
4.3.1.10 Transmitter unwanted emissions in the spurious domain . 26
4.3.1.10.1 Applicability . 26
4.3.1.10.2 Definition. 26
4.3.1.10.3 Limit . 26
4.3.1.10.4 Conformance . 26
4.3.1.11 Receiver spurious emissions . 26
4.3.1.11.1 Applicability . 26
4.3.1.11.2 Definition. 26
4.3.1.11.3 Limit . 26
4.3.1.11.4 Conformance . 27
4.3.1.12 Receiver Blocking . 27
4.3.1.12.1 Applicability . 27
4.3.1.12.2 Definition. 27
4.3.1.12.3 Performance Criteria . 27
4.3.1.12.4 Limits . 27
4.3.1.12.5 Conformance . 30
4.3.1.13 Geo-location capability . 30
4.3.1.13.1 Applicability . 30
4.3.1.13.2 Definition. 30
4.3.1.13.3 Requirements . 30
4.3.2 Requirements for other types of Wide Band Data Transmission equipment (non-FHSS equipment) . 30
4.3.2.1 Introduction . 30
4.3.2.2 RF output power . 30
4.3.2.2.1 Applicability . 30
4.3.2.2.2 Definition. 30
4.3.2.2.3 Limit . 30
4.3.2.2.4 Conformance . 31
4.3.2.3 Power Spectral Density . 31
4.3.2.3.1 Applicability . 31
4.3.2.3.2 Definition. 31
4.3.2.3.3 Limit . 31
4.3.2.3.4 Conformance . 31
4.3.2.4 Duty Cycle, Tx-sequence, Tx-gap . 31
4.3.2.4.1 Applicability . 31
4.3.2.4.2 Definition. 31
4.3.2.4.3 Limit . 31
4.3.2.4.4 Conformance . 31
4.3.2.5 Medium Utilization (MU) factor . 31
4.3.2.5.1 Applicability . 31
4.3.2.5.2 Definition. 32
4.3.2.5.3 Limit . 32
4.3.2.5.4 Conformance . 32
4.3.2.6 Adaptivity (non-FHSS) . 32
4.3.2.6.1 Applicability . 32
4.3.2.6.2 Non-LBT based Detect and Avoid . 32
4.3.2.6.3 LBT based Detect and Avoid . 33
4.3.2.6.4 Short Control Signalling Transmissions . 36
4.3.2.7 Occupied Channel Bandwidth . 37
4.3.2.7.1 Applicability . 37
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 300 328 V2.2.0 (2017-11)
4.3.2.7.2 Definition. 37
4.3.2.7.3 Limits . 37
4.3.2.7.4 Conformance . 37
4.3.2.8 Transmitter unwanted emissions in the out-of-band domain . 37
4.3.2.8.1 Applicability . 37
4.3.2.8.2 Definition. 37
4.3.2.8.3 Limit . 37
4.3.2.8.4 Conformance . 38
4.3.2.9 Transmitter unwanted emissions in the spurious domain . 38
4.3.2.9.1 Applicability . 38
4.3.2.9.2 Definition. 38
4.3.2.9.3 Limit . 38
4.3.2.9.4 Conformance . 38
4.3.2.10 Receiver spurious emissions . 39
4.3.2.10.1 Applicability . 39
4.3.2.10.2 Definition. 39
4.3.2.10.3 Limit . 39
4.3.2.10.4 Conformance . 39
4.3.2.11 Receiver Blocking . 39
4.3.2.11.1 Applicability . 39
4.3.2.11.2 Definition. 39
4.3.2.11.3 Performance Criteria . 39
4.3.2.11.4 Limits . 39
4.3.2.11.5 Conformance . 42
4.3.2.12 Geo-location capability . 42
4.3.2.12.1 Applicability . 42
4.3.2.12.2 Definition. 42
4.3.2.12.3 Requirements . 42
5 Testing for compliance with technical requirements . 42
5.1 Environmental conditions for testing . 42
5.1.1 Introduction. 42
5.1.2 Normal test conditions . 42
5.1.2.1 Normal temperature and humidity . 42
5.1.2.2 Normal power source . 43
5.1.3 Extreme test conditions . 43
5.2 Interpretation of the measurement results . 43
5.3 Definition of other test conditions . 43
5.3.1 Test mode. 43
5.3.2 Antennas and transmit operating modes . 44
5.3.2.1 Integrated and dedicated antennas . 44
5.3.2.2 Smart antenna systems and related operating modes . 44
5.3.2.2.1 Introduction . 44
5.3.2.2.2 Operating mode 1 (single antenna) . 44
5.3.2.2.3 Operating mode 2 (multiple antennas, no beamforming) . 44
5.3.2.2.4 Operating mode 3 (multiple antennas, with beamforming) . 44
5.3.2.3 Configuration for testing . 45
5.3.3 Adaptive and Non-adaptive equipment. 45
5.3.4 Presentation of equipment . 45
5.3.4.1 Introduction . 45
5.3.4.2 Testing of stand-alone equipment . 45
5.3.4.3 Testing of host connected equipment and plug-in radio equipment . 45
5.3.4.3.1 Introduction . 45
5.3.4.3.2 The use of a host or test jig for testing plug-in radio equipment . 45
5.3.4.3.3 Testing of combinations . 45
5.3.5 Conducted measurements, radiated measurements, relative measurements . 46
5.4 Test procedures for essential radio test suites. 47
5.4.1 Product Information .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.