ETSI EN 302 066-2 V1.2.1 (2008-02)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
REN/ERM-TG31A-0113-2
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Uporaba sistemov za slikanje pri radarjih za sondiranje tal in zidov (GPR/WPR) - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Relations
Buy Standard
Standards Content (Sample)
Final draft ETSI EN 302 066-2 V1.2.1 (2007-12)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Ground- and Wall- Probing Radar applications (GPR/WPR)
imaging systems;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 066-2 V1.2.1 (2007-12)
Reference
REN/ERM-TG31A-0113-2
Keywords
radar, radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 066-2 V1.2.1 (2007-12)
Contents
Intellectual Property Rights.4
Foreword.4
Introduction .4
1 Scope.5
2 References.5
2.1 Normative references.6
3 Definitions, symbols and abbreviations .6
3.1 Definitions.6
3.2 Symbols.6
3.3 Abbreviations.6
4 Technical requirements specifications .6
4.1 Environmental conditions.6
4.1.1 Environmental profile.6
4.1.2 Power supply.6
4.2 Conformance requirements.7
4.2.1 Frequency band of operation .7
4.2.2 Undesired Emissions.7
4.2.3 Calculation of the maximum mean e.i.r.p. spectral density .7
4.2.4 Deactivation mechanism requirements .7
5 Testing for compliance with technical requirements.7
5.1 Environmental conditions for testing .7
5.2 Essential radio test suites.7
5.2.1 Frequency band of operation .7
5.2.2 Undesired Emissions.7
5.3 Interpretation of results and measurement uncertainty.7
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT).8
Annex B (informative): The EN title in the official languages .10
Annex C (informative): Bibliography.11
History .12
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 066-2 V1.2.1 (2007-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards Two-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The document responds to the EC mandate M/329 for Harmonized Standards covering Ultra-WideBand applications.
Technical specifications relevant to Directive 1999/5/EC are given in annex A.
The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Ground- and Wall- Probing Radar applications, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 (see bibliography).
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 066-2 V1.2.1 (2007-12)
1 Scope
The present document specifies the requirements for Ground- and Wall- Probing Radar imaging systems applications.
Ground Probing Radars (GPR) and Wall Probing Radars (WPR) are used in survey and detection applications.
The scope is limited to GPR andWPR radars, in which the system is in close proximity to the materials being
investigated. It does not include radars operated from aircraft or spacecraft.
The GPR/WPR applications in the present document are not intended for communications purposes, and the intended
signal is not radiated into free space.
NOTE: Equipment covered by the present document is intended to be used by competent professional personnel.
The present document applies to:
1) Ground Probing Radars (GPR) operating over approximately one decade in the frequency range
30 MHz to 12,4 GHz radiating directly downwards into the ground. Any horizontal radiation from this
equipment is caused by leakage and is considered as undesired emission.
2) Wall Probing Radars (WPR) operating in the frequency range 30 MHz to 12,4 GHz radiating directly into a
"wall". The "wall" is a building material structure, the side of a bridge, the wall of a mine or another physical
structure that absorbs a significant part of the signal transmitted by the radar.
3) Equipment fitted with integral antennas and without antenna connector.
4) Equipment which uses different imaging heads (antennas) with an antenna connector, to allow operation at
different frequencies.
The present document does not necessarily include all the characteristics which may be required by a user, nor does it
necessarily represent the optimum performance achievable.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of th
...
SLOVENSKI STANDARD
SIST EN 302 066-2 V1.2.1:2008
01-september-2008
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50
8SRUDEDVLVWHPRY]DVOLNDQMHSULUDGDUMLK]DVRQGLUDQMHWDOLQ]LGRY *35:35
GHO +DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Ground- and Wall-
Probing Radar applications (GPR/WPR) imaging systems - Part 2: Harmonized EN
covering essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 302 066-2 Version 1.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 302 066-2 V1.2.1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 302 066-2 V1.2.1:2008
---------------------- Page: 2 ----------------------
SIST EN 302 066-2 V1.2.1:2008
ETSI EN 302 066-2 V1.2.1 (2008-02)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Ground- and Wall- Probing Radar applications (GPR/WPR)
imaging systems;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 3 ----------------------
SIST EN 302 066-2 V1.2.1:2008
2 ETSI EN 302 066-2 V1.2.1 (2008-02)
Reference
REN/ERM-TG31A-0113-2
Keywords
radar, radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 302 066-2 V1.2.1:2008
3 ETSI EN 302 066-2 V1.2.1 (2008-02)
Contents
Intellectual Property Rights.4
Foreword.4
Introduction .4
1 Scope.5
2 References.5
2.1 Normative references.6
3 Definitions, symbols and abbreviations .6
3.1 Definitions.6
3.2 Symbols.6
3.3 Abbreviations.6
4 Technical requirements specifications .6
4.1 Environmental conditions.6
4.1.1 Environmental profile.6
4.1.2 Power supply.6
4.2 Conformance requirements.6
4.2.1 Frequency band of operation .6
4.2.2 Undesired Emissions.7
4.2.3 Calculation of the maximum mean e.i.r.p. spectral density .7
4.2.4 Deactivation mechanism requirements .7
5 Testing for compliance with technical requirements.7
5.1 Environmental conditions for testing .7
5.2 Essential radio test suites.7
5.2.1 Frequency band of operation .7
5.2.2 Undesired Emissions.7
5.3 Interpretation of results and measurement uncertainty.7
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).8
Annex B (informative): The EN title in the official languages .10
Annex C (informative): Bibliography.12
History .13
ETSI
---------------------- Page: 5 ----------------------
SIST EN 302 066-2 V1.2.1:2008
4 ETSI EN 302 066-2 V1.2.1 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The document responds to the EC mandate M/329 for Harmonized Standards covering Ultra-WideBand applications.
Technical specifications relevant to Directive 1999/5/EC are given in annex A.
The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Ground- and Wall- Probing Radar applications, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 22 February 2008
Date of latest announcement of this EN (doa): 31 May 2008
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2008
Date of withdrawal of any conflicting National Standard (dow): 30 November 2009
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 (see bibliography).
ETSI
---------------------- Page: 6 ----------------------
SIST EN 302 066-2 V1.2.1:2008
5 ETSI EN 302 066-2 V1.2.1 (2008-02)
1 Scope
The present document specifies the requirements for Ground- and Wall- Probing Radar imaging systems applications.
Ground Probing Radars (GPR) and Wall Probing Radars (WPR) are used in survey and detection applications.
The scope is limited to GPR and WPR radars, in which the system is in close proximity to the materials being
investigated. It does not include radars operated from aircraft or spacecraft.
The GPR/WPR applications in the present document are not intended for communications purposes, and the intended
signal is not radiated into free space.
NOTE: Equipment covered by the present document is intended to be used by competent professional personnel.
The present document applies to:
1) Ground Probing Radars (GPR) operating over approximately one decade in the frequency range
30 MHz to 12,4 GHz radiating directly downwards into the ground. Any horizontal radiation from this
equipment is caused by leakage and is considered as undesired emission.
2) Wall Probing Radars (WPR) operating in the frequency range 30 MHz to 12,4 GHz radiating directly into a
"wall". The "wall" is a building material structure, the side of a bridge, the wall of a mine or another physical
structure that absorbs a significant part of the signal transmitted by the radar.
3) Equipment fitted with integral antennas and without antenna connector.
4) Equipment which uses different imaging heads (antennas) with an antenna connector, to allow operation at
different frequencies.
The present document does not necessarily include all the characteristics which may be required by a user, nor does it
necessarily represent the optimum performance achievable.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive will apply to equipment within the scope of the present document.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 7 ----------------------
SIST EN 302 066-2 V1.2.1:2008
6 ETSI EN 302 066-2 V1.2.1 (2008-02)
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 302 066-1 (V1.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 1: Technical
characteristics and test methods".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in EN 302 066-1 [1] and the following apply:
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
3.2 Symbo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.