Satellite Earth Stations and Systems (SES); Harmonized EN for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive

DEN/SES-00085

Satelitske zemeljske postaje in sistemi (SES) – Harmonizirani EN za satelitske mobilne letalske zemeljske postaje (AESs), delujoče v frekvenčnih pasovih 11/12/14 GHz, ki zajema bistvene zahteve člena 3.2 direktive R&TTE

General Information

Status
Published
Publication Date
29-Apr-2004
Current Stage
12 - Completion
Due Date
06-Feb-2004
Completion Date
28-Jan-2004
Mandate

Buy Standard

Standard
EN 302 186 V1.1.1:2004
English language
56 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 302 186 V1.1.1:2004
01-julij-2004
6DWHOLWVNH]HPHOMVNHSRVWDMHLQVLVWHPL 6(6 ±+DUPRQL]LUDQL(1]DVDWHOLWVNH
PRELOQHOHWDOVNH]HPHOMVNHSRVWDMH $(6V GHOXMRþHYIUHNYHQþQLKSDVRYLK
*+]NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Satellite Earth Stations and Systems (SES); Harmonized EN for satellite mobile Aircraft
Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering essential
requirements under article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 302 186 Version 1.1.1
ICS:
33.070.40 Satelit Satellite
SIST EN 302 186 V1.1.1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 302 186 V1.1.1:2004

---------------------- Page: 2 ----------------------

SIST EN 302 186 V1.1.1:2004

ETSI EN 302 186 V1.1.1 (2004-01)
Candidate Harmonized European Standard (Telecommunications series)

Satellite Earth Stations and Systems (SES);
Harmonized EN for satellite mobile
Aircraft Earth Stations (AESs)
operating in the 11/12/14 GHz frequency bands
covering essential requirements
under article 3.2 of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 302 186 V1.1.1:2004
 2 ETSI EN 302 186 V1.1.1 (2004-01)



Reference
DEN/SES-00085
Keywords
aeronautical, air interface, AMSS, earth station,
FSS, GSO, mobile, MSS, regulation, satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2004.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 302 186 V1.1.1:2004
 3 ETSI EN 302 186 V1.1.1 (2004-01)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .7
1 Scope.9
2 References.10
3 Definitions, symbols and abbreviations .11
3.1 Definitions.11
3.2 Symbols.14
3.3 Abbreviations.14
4 Technical requirement specifications.15
4.1 General.15
4.1.1 Environmental profile.15
4.2 Conformance requirements.15
4.2.1 General.15
4.2.2 Spurious radiation.16
4.2.2.1 Justification.16
4.2.2.2 Specification.16
4.2.2.3 Conformance tests.17
4.2.3 On-axis spurious radiation .17
4.2.3.1 Justification.17
4.2.3.2 Specification.17
4.2.3.2.1 "Carrier-on" state.17
4.2.3.2.2 "Carrier-off" state and "transmission disabled" state.18
4.2.3.3 Conformance tests.18
4.2.4 Off-axis EIRP emissions density in the nominated bandwidth.18
4.2.4.1 Justification.18
4.2.4.2 Specification.18
4.2.4.3 Conformance tests.19
4.2.5 Control and Monitoring Functions (CMF).19
4.2.5.1 Processor monitoring.20
4.2.5.1.1 Justification.20
4.2.5.1.2 Specification.20
4.2.5.1.3 Conformance tests.20
4.2.5.2 Transmit subsystem monitoring.21
4.2.5.2.1 Justification.21
4.2.5.2.2 Specification.21
4.2.5.2.3 Conformance tests.21
4.2.5.3 Power-on/Reset.21
4.2.5.3.1 Justification.21
4.2.5.3.2 Specification.21
4.2.5.3.3 Conformance tests.21
4.2.5.4 Control Channel (CC) reception .21
4.2.5.4.1 Justification.21
4.2.5.4.2 Specification.21
4.2.5.4.3 Conformance tests.21
4.2.5.5 Network control commands .22
4.2.5.5.1 Justification.22
4.2.5.5.2 Specification.22
4.2.5.5.3 Conformance tests.22
4.2.5.6 Initial burst transmission .22
4.2.5.6.1 General.22
4.2.5.6.2 Specification.22
4.2.5.6.3 Conformance tests.23
ETSI

---------------------- Page: 5 ----------------------

SIST EN 302 186 V1.1.1:2004
 4 ETSI EN 302 186 V1.1.1 (2004-01)
4.2.6 Power Flux Density at the surface of the earth .23
4.2.6.1 General.23
4.2.6.2 Power flux density limits in the 14,00 GHz to 14,50 GHz frequency band .23
4.2.6.2.1 Justification.23
4.2.6.2.2 Specification 1: mode of PFD limitation .23
4.2.6.2.3 Specification 2: Location where to limit the PFD .24
4.2.6.2.4 Specification 3: PFD limitation .24
4.2.6.2.5 Specification 4: Fault conditions .25
4.2.6.2.6 Conformance tests.25
5 Testing for compliance with technical requirements.25
5.1 Environmental conditions for testing .25
5.2 Essential radio test suites.25
6 Test methods.26
6.0 General.26
6.1 Spurious radiation.27
6.1.1 Test method.27
6.1.1.1 Up to 1 000 MHz (see clause 4.2.2.2, table 2) .27
6.1.1.1.1 Test site.27
6.1.1.1.2 Measuring receivers.28
6.1.1.1.3 Procedure.28
6.1.1.2 Above 1 000 MHz (see clause 4.2.2.2, tables 3 and 4) .28
6.1.1.2.1 Identification of the significant frequencies of spurious radiation .28
6.1.1.2.2 Measurement of radiated power levels of identified spurious radiation.29
6.2 On-axis spurious radiation.30
6.2.1 Test method.30
6.2.1.1 Test site.30
6.2.1.2 Method of measurement.30
6.2.1.2.1 General.30
6.2.1.2.2 Method of measurement at the antenna flange .30
6.2.1.2.3 Method of measurement with a test antenna .31
6.3 Off-axis EIRP emissions density in the nominated bandwidth .32
6.3.1 General.32
6.3.2 rms antenna pointing accuracy.33
6.3.2.1 Method of measurement.33
6.3.3 Measurement of the off-axis EIRP without the antenna .33
6.3.3.1 Transmitter output power density .33
6.3.3.1.1 Method of measurement.34
6.3.3.2 Antenna transmit gain.34
6.3.3.2.1 General.34
6.3.3.2.2 Test site.34
6.3.3.2.3 Method of measurement.35
6.3.3.3 Antenna transmit radiation patterns .36
6.3.3.3.1 General.36
6.3.3.3.2 Test site.36
6.3.3.3.3 Method of measurement.36
6.3.3.4 Computation of results .37
6.3.4 Measurement of the off-axis EIRP with the antenna .37
6.3.4.1 General.37
6.3.4.2 Maximum EIRP density per 40 kHz ratio relative to the EIRP.37
6.3.4.2.1 Method of measurement.38
6.3.4.3 Maximum on-axis EIRP.38
6.3.4.3.1 General.38
6.3.4.3.2 Test site.38
6.3.4.3.3 Method of measurement.39
6.3.4.4 Antenna transmit radiation patterns .40
6.3.4.4.1 General.40
6.3.4.4.2 Test site.40
6.3.4.4.3 Method of measurement.41
6.3.4.5 Computation of results .42
6.4 Power Flux Density Test .42
ETSI

---------------------- Page: 6 ----------------------

SIST EN 302 186 V1.1.1:2004
 5 ETSI EN 302 186 V1.1.1 (2004-01)
6.4.1 General.42
6.4.2 Verification of specification 1: mode of PFD limitation.42
6.4.3 Verification of specification 2: Location where to limit the PFD.43
6.4.4 Verification of specification 3: PFD limitation.43
6.4.4.1 Measurement of the antenna radiation pattern below the aircraft fuselage .43
6.4.4.1.1 General.43
6.4.4.1.2 Test site.43
6.4.4.1.3 Test method procedure .43
6.4.4.2 Measurement of on-axis EIRP as a function of altitude.44
6.4.4.2.1 General.44
6.4.4.2.2 Test site.44
6.4.4.2.3 Method of measurement with a test antenna .45
6.4.4.3 Computation of the power flux density at the surface of the Earth.45
6.4.5 Verification of specification 4: Fault conditions.46
6.4.5.1 Test Arrangement.46
6.4.5.2 Test method.46
6.5 Control and monitoring.47
6.5.1 Test arrangement.47
6.5.2 Processor monitoring.48
6.5.2.1 Test method.48
6.5.3 Transmit subsystem monitoring.48
6.5.3.1 Test method.48
6.5.4 Power-on/Reset.49
6.5.4.1 Test method.49
6.5.5 Control Channel (CC) reception .49
6.5.5.1 Test method.49
6.5.6 Network control commands.50
6.5.6.1 Test method.50
6.5.7 Initial burst transmission.51
6.5.7.1 Test method.51
Annex A (normative): The EN Requirements Table (EN-RT).52
Annex B (normative): Environmental conditions.53
B.1 General.53
B.2 Environmental conformance requirements.53
B.3 Environmental test conditions.53
Annex C (informative): Bibliography.55
History .56

ETSI

---------------------- Page: 7 ----------------------

SIST EN 302 186 V1.1.1:2004
 6 ETSI EN 302 186 V1.1.1 (2004-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Satellite Earth Stations and Systems (SES).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A.

National transposition dates
Date of adoption of this EN: 23 January 2004
Date of latest announcement of this EN (doa): 30 April 2004
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2004
Date of withdrawal of any conflicting National Standard (dow): 31 October 2004

ETSI

---------------------- Page: 8 ----------------------

SIST EN 302 186 V1.1.1:2004
 7 ETSI EN 302 186 V1.1.1 (2004-01)
Introduction
The present document is part of a set of standards designed to fit in a modular structure to cover all radio and
telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure.
The modular structure is shown in figure 1a.
Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Interworking via the network*
equipment
3.3a class or type
Interworking with the network
Use of spectrum
3.2
New radio harmonized standards
Spectrum
Scoped by frequency and/or equipment type
Radio Product EMC
EN 301 489 multi-part EMC standard
3.1b
EMC
Generic and product standards also notified under EMC Directive
- If needed, new standards for human exposure to
Electromag
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.