ETSI EN 300 175-3 V2.6.1 (2015-07)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer
REN/DECT-000304-3
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Skupni vmesnik (CI) - 3. del: Plast krmiljenja dostopa do prenosnega medija (MAC)
Ta dokument je eden od delov specifikacije skupnega vmesnika (CI) za digitalne izboljšane brezvrvične telekomunikacije (DECT).
Ta dokument določa plast krmiljenja dostopa do prenosnega medija (MAC). Plast krmiljenja dostopa do prenosnega medija je 3. del standarda za skupni vmesnik za digitalne izboljšane brezvrvične telekomunikacije, plast 2a pa sklada protokolov digitalnih izboljšanih brezvrvičnih telekomunikacij.
Določa tri skupine storitev krmiljenja dostopa do prenosnega medija:
• storitev nadzora sporočil za oddajanje;
• storitev nadzora sporočil brez povezave; in
• storitev nadzora več nosilcev.
Poleg tega določa logične kanale, ki jih uporabljajo zgornje storitve, ter kako so ti kanali multipleksirani in preslikani v podatkovne enote storitve (SDU-je), ki se izmenjavajo s fizično plastjo (PHL).
Ta dokument vključuje novo generacijo digitalnih izboljšanih brezvrvičnih telekomunikacij, nadaljnji razvoj standarda za digitalne izboljšane brezvrvične telekomunikacije, ki uvaja širokopasovni govor, izpopolnjene podatkovne storitve, nove tipe rež in druge tehnične izpopolnitve.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 300 175-3 V2.6.1SIST EN 300 175-3 V2.6.1:2015en,fr,de01-november-2015SIST EN 300 175-3 V2.6.1:2015SLOVENSKI
STANDARD
SIST EN 300 175-3 V2.6.1:2015
ETSI EN 300 175-3 V2.6.1 (2015-07) Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer
EUROPEAN STANDARD SIST EN 300 175-3 V2.6.1:2015
ETSI ETSI EN 300 175-3 V2.6.1 (2015-07) 2
Reference REN/DECT-000304-3 Keywords DECT, IMT-2000, MAC, mobility, radio, TDD, TDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 175-3 V2.6.1:2015
ETSI ETSI EN 300 175-3 V2.6.1 (2015-07) 3 Contents Intellectual Property Rights . 16 Foreword . 16 Modal verbs terminology . 16 1 Scope . 17 2 References . 17 2.1 Normative references . 17 2.2 Informative references . 18 3 Definitions, symbols and abbreviations . 19 3.1 Definitions . 19 3.2 Symbols and abbreviations . 19 4 Description of the MAC layer . 22 4.1 MAC layer reference model . 22 4.1.1 General . 22 4.1.2 Cluster Control Function (CCF) . 23 4.1.3 Cell Site Functions (CSF) . 23 4.1.4 Relationship to physical layer elements . 23 4.2 Frame and multiframe structures . 24 4.2.1 General . 24 4.2.2 Frame structure . 24 4.2.3 Multiframe structure . 25 4.3 State definitions . 26 4.3.1 PP states . 26 4.3.2 RFP states . 27 5 Overview of MAC layer services . 27 5.1 General . 27 5.1.0 Service groupings . 27 5.1.1 Broadcast Message Control (BMC) . 28 5.1.2 Connectionless Message Control (CMC) . 28 5.1.3 Multi-Bearer Control . 28 5.2 Service descriptions . 28 5.2.1 Common functions . 28 5.2.2 BMC service . 28 5.2.3 CMC service . 29 5.2.4 MBC services. 29 5.3 Logical channels . 29 5.3.0 Overview . 29 5.3.1 MBC connection endpoints (MC-SAP logical channels) . 30 5.3.1.1 The higher layer C-plane channels, C . 30 5.3.1.2 The higher layer U-Plane channels, I . 30 5.3.1.3 The higher layer U-Plane control channels, GF and GFA . 31 5.3.1.4 The higher layer U-Plane channel in E+U type slots, IPF . 31 5.3.2 CMC endpoints (MB-SAP logical channels) . 31 5.3.2.1 The connectionless C-Plane channels, CL . 31 5.3.2.2 The connectionless U-Plane channels, SIN and SIP . 32 5.3.2.3 The connectionless U-Plane channel in E+U type slots, SIPF. 32 5.3.3 BMC endpoint (MA-SAP logical channel) . 32 5.3.3.1 The slow broadcast channel, BS . 32 5.3.3.2 The ULE broadcast channel, BU . 32 5.3.4 Internal MAC control channels . 33 5.3.4.1 The system information channel, Q . 33 5.3.4.2 Identities channel, N. 33 5.3.4.3 The MAC control channel, M . 33 5.3.4.4 MAC paging channel, P . 33 5.3.4.5 The Compound System Information Channel, QC . 33 SIST EN 300 175-3 V2.6.1:2015
ETSI ETSI EN 300 175-3 V2.6.1 (2015-07) 4 5.3.4.6 The Split Identities Channel, NS . 34 5.3.4.7 The ULE MAC Control Channel, MU . 34 5.3.4.8 The ULE Paging Channel, PU . 34 5.4 SAP definitions . 34 5.4.0 General . 34 5.4.1 MA SAP . 34 5.4.2 MB SAP . 35 5.4.3 MC SAP . 35 5.4.4 ME SAP . 36 5.4.5 Order of transmission. 36 5.5 Bearers . 36 5.5.0 General . 36 5.5.1 Bearer types . 36 5.5.2 Bearer operation . 37 5.6 Connection oriented services . 37 5.6.0 General . 37 5.6.1 Connection types . 37 5.6.1.0 General . 37 5.6.1.1 Basic connections . 37 5.6.1.2 Advanced connections . 38 5.6.1.2.0 General . 38 5.6.1.2.1 Rules for ECN selection in advanced connections . 38 5.6.1.2.2 Expedited operations in advanced connections . 38 5.6.1.3 Connection identifiers . 39 5.6.1.4 Complementary connections . 39 5.6.2 Symmetric and asymmetric connections . 39 5.6.2.0 General . 39 5.6.2.1 Symmetric connections . 39 5.6.2.2 Asymmetric connections . 45 5.7 Broadcast and connectionless services . 56 5.7.0 General . 56 5.7.1 The broadcast services . 56 5.7.1.0 General . 56 5.7.1.1 The continuous broadcast service . 56 5.7.1.2 The non-continuous broadcast service . 57 5.7.2 The connectionless services . 57 5.7.2.0 General . 57 5.7.2.1 Connectionless downlink services . 57 5.7.2.1.1 Coding of TA and BA bits in connectionless downlink services . 58 5.7.2.2 Connectionless uplink services . 58 5.8 ULE Broadcast services . 59 5.8.0 General . 59 5.8.1 The continuous ULE broadcast service . 59 6 Multiplexing . 59 6.0 General . 59 6.1 CCF multiplexing functions . 59 6.2 CSF multiplexing functions . 59 6.2.0 General . 59 6.2.1 Bit Mappings (MAP) . 65 6.2.1.0 General . 65 6.2.1.1 D-field mapping (D-MAP) . 65 6.2.1.1.0 General . 65 6.2.1.1.1 D-field mapping for the double slot structure (physical packet P80) . 66 6.2.1.1.2 D-field mapping for the full slot structure (physical packet P32) . 66 6.2.1.1.3 D-field mapping for the short slot structure (physical packet P00) . 67 6.2.1.1.4 D-field mapping for the variable slot structure (physical packet P00j) . 68 6.2.1.2 A-field Mapping (A-MAP) . 69 6.2.1.3 B-field Mapping (B-MAP) . 70 6.2.1.3.0 General . 70 6.2.1.3.1 Unprotected format . 70 SIST EN 300 175-3 V2.6.1:2015
ETSI ETSI EN 300 175-3 V2.6.1 (2015-07) 5 6.2.1.3.2 Encoded protected format . 71 6.2.1.3.3 Multisubfield protected format . 72 6.2.1.3.4 Singlesubfield protected format switches . 75 6.2.1.3.5 Constant-size subfield protected format . 76 6.2.2 Time multiplexers . 79 6.2.2.0 General . 79 6.2.2.1 Tail MUltipleXer (T-MUX) . 79 6.2.2.1.0 General . 79 6.2.2.1.1 T-MUX algorithm for RFP transmissions . 79 6.2.2.1.2 T-MUX algorithm for PT transmissions . 81 6.2.2.2 B-field control multiplexer (E/U-MUX) . 82 6.2.2.3 B-field mode multiplexer E-type and E+U-type modes . 84 6.2.2.3.1 E-type and E+U-type modes for slots with more than one subfield . 84 6.2.2.3.2 Half slot (j=80) modes for 2-level modulation . 97 6.2.2.4 Priority scheme in E or E+U mode . 98 6.2.3 MAC Encryption . 99 6.2.4 Scrambling . 99 6.2.5 Error control. 101 6.2.5.0 General . 101 6.2.5.1 R-CRC overview . 101 6.2.5.2 R-CRC generation and checking . 102 6.2.5.3 X-CRC overview . 102 6.2.5.4 X-CRC generation and checking . 102 6.2.5.5 B-CRC generation and checking . 104 6.2.6 Broadcast controller . 105 7 Medium access layer messages . 105 7.0 General . 105 7.1 Header field . 106 7.1.1 Overview/formatting . 106 7.1.2 Tail identification, TA, bits a0 to a2 . 106 7.1.3 The "Q1/BCK" bit, bit a3 . 106 7.1.4 B-field identification, BA, bits a4 to a6 . 107 7.1.5 The "Q2" bit, bit a7 . 108 7.2 Messages in the tail field . 108 7.2.1 Overview . 108 7.2.2 Identities information (NT) . 109 7.2.3 System information and multiframe marker (QT) . 109 7.2.3.1 General . 109 7.2.3.2 Static system information . 110 7.2.3.2.1 General, QH = 0, 1 (hex) . 110 7.2.3.2.2 QH and Normal-Reverse (NR) . 110 7.2.3.2.3 Slot Number (SN) . 110 7.2.3.2.4 Start Position (SP) . 111 7.2.3.2.5 ESCape bit (ESC) . 111 7.2.3.2.6 Number of transceivers . 111 7.2.3.2.7 Extended RF carrier information available (Mc) . 112 7.2.3.2.8 RF carriers available (RF-cars) . 112 7.2.3.2.9 Spare bits (SPR) . 112 7.2.3.2.10 Carrier number. 112 7.2.3.2.11 Extended static system information available (Ext-System-Info) and spare bit . 113 7.2.3.2.12 Primary receiver Scan Carrier Number (PSCN) . 113 7.2.3.3 Extended RF carrier information part 1 . 113 7.2.3.3.1 General, QH = 2 (hex) . 113 7.2.3.3.2 Further RF carrier extensions . 114 7.2.3.3.3 Number of RF carriers . 114 7.2.3.4 Fixed part capabilities . 114 7.2.3.4.1 General, QH = 3 (hex) . 114 7.2.3.4.2 Standard capabilities . 114 7.2.3.5 Extended fixed part capabilities . 115 7.2.3.5.1 General, QH = 4 (hex) .
...
ETSI EN 300 175-3 V2.6.1 (2015-07)
EUROPEAN STANDARD
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI);
Part 3: Medium Access Control (MAC) layer
---------------------- Page: 1 ----------------------
2 ETSI EN 300 175-3 V2.6.1 (2015-07)
Reference
REN/DECT-000304-3
Keywords
DECT, IMT-2000, MAC, mobility, radio, TDD,
TDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 300 175-3 V2.6.1 (2015-07)
Contents
Intellectual Property Rights . 16
Foreword . 16
Modal verbs terminology . 16
1 Scope . 17
2 References . 17
2.1 Normative references . 17
2.2 Informative references . 18
3 Definitions, symbols and abbreviations . 19
3.1 Definitions . 19
3.2 Symbols and abbreviations . 19
4 Description of the MAC layer . 22
4.1 MAC layer reference model . 22
4.1.1 General . 22
4.1.2 Cluster Control Function (CCF) . 23
4.1.3 Cell Site Functions (CSF) . 23
4.1.4 Relationship to physical layer elements . 23
4.2 Frame and multiframe structures . 24
4.2.1 General . 24
4.2.2 Frame structure . 24
4.2.3 Multiframe structure . 25
4.3 State definitions . 26
4.3.1 PP states . 26
4.3.2 RFP states . 27
5 Overview of MAC layer services . 27
5.1 General . 27
5.1.0 Service groupings . 27
5.1.1 Broadcast Message Control (BMC) . 28
5.1.2 Connectionless Message Control (CMC) . 28
5.1.3 Multi-Bearer Control . 28
5.2 Service descriptions . 28
5.2.1 Common functions . 28
5.2.2 BMC service . 28
5.2.3 CMC service . 29
5.2.4 MBC services. 29
5.3 Logical channels . 29
5.3.0 Overview . 29
5.3.1 MBC connection endpoints (MC-SAP logical channels) . 30
5.3.1.1 The higher layer C-plane channels, C . 30
5.3.1.2 The higher layer U-Plane channels, I . 30
5.3.1.3 The higher layer U-Plane control channels, G and G . 31
F FA
5.3.1.4 The higher layer U-Plane channel in E+U type slots, I . 31
PF
5.3.2 CMC endpoints (MB-SAP logical channels) . 31
5.3.2.1 The connectionless C-Plane channels, CL . 31
5.3.2.2 The connectionless U-Plane channels, SI and SI . 32
N P
5.3.2.3 The connectionless U-Plane channel in E+U type slots, SI . 32
PF
5.3.3 BMC endpoint (MA-SAP logical channel) . 32
5.3.3.1 The slow broadcast channel, B . 32
S
5.3.3.2 The ULE broadcast channel, B . 32
U
5.3.4 Internal MAC control channels . 33
5.3.4.1 The system information channel, Q . 33
5.3.4.2 Identities channel, N. 33
5.3.4.3 The MAC control channel, M . 33
5.3.4.4 MAC paging channel, P . 33
5.3.4.5 The Compound System Information Channel, Q . 33
C
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 300 175-3 V2.6.1 (2015-07)
5.3.4.6 The Split Identities Channel, N . 34
S
5.3.4.7 The ULE MAC Control Channel, M . 34
U
5.3.4.8 The ULE Paging Channel, P . 34
U
5.4 SAP definitions . 34
5.4.0 General . 34
5.4.1 MA SAP . 34
5.4.2 MB SAP . 35
5.4.3 MC SAP . 35
5.4.4 ME SAP . 36
5.4.5 Order of transmission. 36
5.5 Bearers . 36
5.5.0 General . 36
5.5.1 Bearer types . 36
5.5.2 Bearer operation . 37
5.6 Connection oriented services . 37
5.6.0 General . 37
5.6.1 Connection types . 37
5.6.1.0 General . 37
5.6.1.1 Basic connections . 37
5.6.1.2 Advanced connections . 38
5.6.1.2.0 General . 38
5.6.1.2.1 Rules for ECN selection in advanced connections . 38
5.6.1.2.2 Expedited operations in advanced connections . 38
5.6.1.3 Connection identifiers . 39
5.6.1.4 Complementary connections . 39
5.6.2 Symmetric and asymmetric connections . 39
5.6.2.0 General . 39
5.6.2.1 Symmetric connections . 39
5.6.2.2 Asymmetric connections . 45
5.7 Broadcast and connectionless services . 56
5.7.0 General . 56
5.7.1 The broadcast services . 56
5.7.1.0 General . 56
5.7.1.1 The continuous broadcast service . 56
5.7.1.2 The non-continuous broadcast service . 57
5.7.2 The connectionless services . 57
5.7.2.0 General . 57
5.7.2.1 Connectionless downlink services . 57
5.7.2.1.1 Coding of TA and BA bits in connectionless downlink services . 58
5.7.2.2 Connectionless uplink services . 58
5.8 ULE Broadcast services . 59
5.8.0 General . 59
5.8.1 The continuous ULE broadcast service . 59
6 Multiplexing . 59
6.0 General . 59
6.1 CCF multiplexing functions . 59
6.2 CSF multiplexing functions . 59
6.2.0 General . 59
6.2.1 Bit Mappings (MAP) . 65
6.2.1.0 General . 65
6.2.1.1 D-field mapping (D-MAP) . 65
6.2.1.1.0 General . 65
6.2.1.1.1 D-field mapping for the double slot structure (physical packet P80) . 66
6.2.1.1.2 D-field mapping for the full slot structure (physical packet P32) . 66
6.2.1.1.3 D-field mapping for the short slot structure (physical packet P00) . 67
6.2.1.1.4 D-field mapping for the variable slot structure (physical packet P00j) . 68
6.2.1.2 A-field Mapping (A-MAP) . 69
6.2.1.3 B-field Mapping (B-MAP) . 70
6.2.1.3.0 General . 70
6.2.1.3.1 Unprotected format . 70
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 300 175-3 V2.6.1 (2015-07)
6.2.1.3.2 Encoded protected format . 71
6.2.1.3.3 Multisubfield protected format . 72
6.2.1.3.4 Singlesubfield protected format switches . 75
6.2.1.3.5 Constant-size subfield protected format . 76
6.2.2 Time multiplexers . 79
6.2.2.0 General . 79
6.2.2.1 Tail MUltipleXer (T-MUX) . 79
6.2.2.1.0 General . 79
6.2.2.1.1 T-MUX algorithm for RFP transmissions . 79
6.2.2.1.2 T-MUX algorithm for PT transmissions . 81
6.2.2.2 B-field control multiplexer (E/U-MUX) . 82
6.2.2.3 B-field mode multiplexer E-type and E+U-type modes . 84
6.2.2.3.1 E-type and E+U-type modes for slots with more than one subfield . 84
6.2.2.3.2 Half slot (j=80) modes for 2-level modulation . 97
6.2.2.4 Priority scheme in E or E+U mode . 98
6.2.3 MAC Encryption . 99
6.2.4 Scrambling . 99
6.2.5 Error control. 101
6.2.5.0 General . 101
6.2.5.1 R-CRC overview . 101
6.2.5.2 R-CRC generation and checking . 102
6.2.5.3 X-CRC overview . 102
6.2.5.4 X-CRC generation and checking . 102
6.2.5.5 B-CRC generation and checking . 104
6.2.6 Broadcast controller . 105
7 Medium access layer messages . 105
7.0 General . 105
7.1 Header field . 106
7.1.1 Overview/formatting . 106
7.1.2 Tail identification, TA, bits a to a . 106
0 2
7.1.3 The "Q1/BCK" bit, bit a3 . 106
7.1.4 B-field identification, BA, bits a to a . 107
4 6
7.1.5 The "Q2" bit, bit a . 108
7
7.2 Messages in the tail field . 108
7.2.1 Overview . 108
7.2.2 Identities information (N ) . 109
T
7.2.3 System information and multiframe marker (QT) . 109
7.2.3.1 General . 109
7.2.3.2 Static system information . 110
7.2.3.2.1 General, Q = 0, 1 (hex) . 110
H
7.2.3.2.2 Q and Normal-Reverse (NR) . 110
H
7.2.3.2.3 Slot Number (SN) . 110
7.2.3.2.4 Start Position (SP) . 111
7.2.3.2.5 ESCape bit (ESC) . 111
7.2.3.2.6 Number of transceivers . 111
7.2.3.2.7 Extended RF carrier information available (Mc) . 112
7.2.3.2.8 RF carriers available (RF-cars) . 112
7.2.3.2.9 Spare bits (SPR) . 112
7.2.3.2.10 Carrier number. 112
7.2.3.2.11 Extended static system information available (Ext-System-Info) and spare bit . 113
7.2.3.2.12 Primary receiver Scan Carrier Number (PSCN) . 113
7.2.3.3 Extended RF carrier information part 1 . 113
7.2.3.3.1 General, Q = 2 (hex) . 113
H
7.2.3.3.2 Further RF carrier extensions . 114
7.2.3.3.3 Number of RF carriers . 114
7.2.3.4 Fixed part capabilities . 114
7.2.3.4.1 General, Q = 3 (hex) . 114
H
7.2.3.4.2 Standard capabilities . 114
7.2.3.5 Extended fixed part capabilities . 115
7.2.3.5.1 General, Q = 4 (hex) . 115
H
7.2.3.5.2 Extended Physical and MAC layer capabilities .
...
Draft ETSI EN 300 175-3 V2.5.8 (2015-03)
EUROPEAN STANDARD
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI);
Part 3: Medium Access Control (MAC) layer
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 300 175-3 V2.5.8 (2015-03)
Reference
REN/DECT-000304-3
Keywords
DECT, IMT-2000, MAC, mobility, radio, TDD,
TDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 300 175-3 V2.5.8 (2015-03)
Contents
Intellectual Property Rights . 16
Foreword . 16
Modal verbs terminology . 16
1 Scope . 17
2 References . 17
2.1 Normative references . 17
2.2 Informative references . 18
3 Definitions, symbols and abbreviations . 19
3.1 Definitions . 19
3.2 Symbols and abbreviations . 19
4 Description of the MAC layer . 22
4.1 MAC layer reference model . 22
4.1.1 General . 22
4.1.2 Cluster Control Function (CCF) . 23
4.1.3 Cell Site Functions (CSF) . 23
4.1.4 Relationship to physical layer elements . 23
4.2 Frame and multiframe structures . 24
4.2.1 General . 24
4.2.2 Frame structure . 24
4.2.3 Multiframe structure . 25
4.3 State definitions . 26
4.3.1 PP states . 26
4.3.2 RFP states . 27
5 Overview of MAC layer services . 27
5.1 General . 27
5.1.0 Service groupings . 27
5.1.1 Broadcast Message Control (BMC) . 28
5.1.2 Connectionless Message Control (CMC) . 28
5.1.3 Multi-Bearer Control . 28
5.2 Service descriptions . 28
5.2.1 Common functions . 28
5.2.2 BMC service . 28
5.2.3 CMC service . 29
5.2.4 MBC services. 29
5.3 Logical channels . 29
5.3.0 Overview . 29
5.3.1 MBC connection endpoints (MC-SAP logical channels) . 30
5.3.1.1 The higher layer C-plane channels, C . 30
5.3.1.2 The higher layer U-Plane channels, I . 30
5.3.1.3 The higher layer U-Plane control channels, G and G . 31
F FA
5.3.1.4 The higher layer U-Plane channel in E+U type slots, I . 31
PF
5.3.2 CMC endpoints (MB-SAP logical channels) . 32
5.3.2.1 The connectionless C-Plane channels, CL . 32
5.3.2.2 The connectionless U-Plane channels, SI and SI . 32
N P
5.3.2.3 The connectionless U-Plane channel in E+U type slots, SI . 32
PF
5.3.3 BMC endpoint (MA-SAP logical channel) . 32
5.3.3.1 The slow broadcast channel, B . 32
S
5.3.3.2 The ULE broadcast channel, B . 33
U
5.3.4 Internal MAC control channels . 33
5.3.4.1 The system information channel, Q . 33
5.3.4.2 Identities channel, N. 33
5.3.4.3 The MAC control channel, M . 33
5.3.4.4 MAC paging channel, P . 33
5.3.4.5 The Compound System Information Channel, Q . 34
C
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 300 175-3 V2.5.8 (2015-03)
5.3.4.6 The Split Identities Channel, N . 34
S
5.3.4.7 The ULE MAC Control Channel, M . 34
U
5.3.4.8 The ULE Paging Channel, P . 34
U
5.4 SAP definitions . 34
5.4.0 General . 34
5.4.1 MA SAP . 34
5.4.2 MB SAP . 35
5.4.3 MC SAP . 35
5.4.4 ME SAP . 36
5.4.5 Order of transmission. 36
5.5 Bearers . 36
5.5.0 General . 36
5.5.1 Bearer types . 36
5.5.2 Bearer operation . 37
5.6 Connection oriented services . 37
5.6.0 General . 37
5.6.1 Connection types . 37
5.6.1.0 General . 37
5.6.1.1 Basic connections . 37
5.6.1.2 Advanced connections . 38
5.6.1.2.0 General . 38
5.6.1.2.1 Rules for ECN selection in advanced connections . 38
5.6.1.2.2 Expedited operations in advanced connections . 38
5.6.1.3 Connection identifiers . 39
5.6.1.4 Complementary connections . 39
5.6.2 Symmetric and asymmetric connections . 39
5.6.2.0 General . 39
5.6.2.1 Symmetric connections . 39
5.6.2.2 Asymmetric connections . 45
5.7 Broadcast and connectionless services . 56
5.7.0 General . 56
5.7.1 The broadcast services . 56
5.7.1.0 General . 56
5.7.1.1 The continuous broadcast service . 56
5.7.1.2 The non-continuous broadcast service . 57
5.7.2 The connectionless services . 57
5.7.2.0 General . 57
5.7.2.1 Connectionless downlink services . 57
5.7.2.1.1 Coding of TA and BA bits in connectionless downlink services . 58
5.7.2.2 Connectionless uplink services . 58
5.8 ULE Broadcast services . 59
5.8.0 General . 59
5.8.1 The continuous ULE broadcast service . 59
6 Multiplexing . 59
6.0 General . 59
6.1 CCF multiplexing functions . 59
6.2 CSF multiplexing functions . 59
6.2.0 General . 59
6.2.1 Bit Mappings (MAP) . 65
6.2.1.0 General . 65
6.2.1.1 D-field mapping (D-MAP) . 65
6.2.1.1.0 General . 65
6.2.1.1.1 D-field mapping for the double slot structure (physical packet P80) . 66
6.2.1.1.2 D-field mapping for the full slot structure (physical packet P32) . 66
6.2.1.1.3 D-field mapping for the short slot structure (physical packet P00) . 67
6.2.1.1.4 D-field mapping for the variable slot structure (physical packet P00j) . 68
6.2.1.2 A-field Mapping (A-MAP) . 69
6.2.1.3 B-field Mapping (B-MAP) . 70
6.2.1.3.0 General . 70
6.2.1.3.1 Unprotected format . 70
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 300 175-3 V2.5.8 (2015-03)
6.2.1.3.2 Encoded protected format . 71
6.2.1.3.3 Multisubfield protected format . 72
6.2.1.3.4 Singlesubfield protected format switches . 75
6.2.1.3.5 Constant-size subfield protected format . 76
6.2.2 Time multiplexers . 79
6.2.2.0 General . 79
6.2.2.1 Tail MUltipleXer (T-MUX) . 79
6.2.2.1.0 General . 79
6.2.2.1.1 T-MUX algorithm for RFP transmissions . 79
6.2.2.1.2 T-MUX algorithm for PT transmissions . 81
6.2.2.2 B-field control multiplexer (E/U-MUX) . 82
6.2.2.3 B-field mode multiplexer E-type and E+U-type modes . 84
6.2.2.3.1 E-type and E+U-type modes for slots with more than one subfield . 84
6.2.2.3.2 Half slot (j=80) modes for 2-level modulation . 97
6.2.2.4 Priority scheme in E or E+U mode . 98
6.2.3 MAC Encryption . 99
6.2.4 Scrambling . 99
6.2.5 Error control. 101
6.2.5.0 General . 101
6.2.5.1 R-CRC overview . 101
6.2.5.2 R-CRC generation and checking . 102
6.2.5.3 X-CRC overview . 102
6.2.5.4 X-CRC generation and checking . 102
6.2.5.5 B-CRC generation and checking . 104
6.2.6 Broadcast controller . 105
7 Medium access layer messages . 105
7.0 General . 105
7.1 Header field . 106
7.1.1 Overview/formatting . 106
7.1.2 Tail identification, TA, bits a to a . 106
0 2
7.1.3 The "Q1/BCK" bit, bit a3 . 106
7.1.4 B-field identification, BA, bits a to a . 107
4 6
7.1.5 The "Q2" bit, bit a . 108
7
7.2 Messages in the tail field . 108
7.2.1 Overview . 108
7.2.2 Identities information (N ) . 109
T
7.2.3 System information and multiframe marker (QT) . 109
7.2.3.1 General . 109
7.2.3.2 Static system information . 110
7.2.3.2.1 General, Q = 0, 1 (hex) . 110
H
7.2.3.2.2 Q and Normal-Reverse (NR) . 110
H
7.2.3.2.3 Slot Number (SN) . 110
7.2.3.2.4 Start Position (SP) . 111
7.2.3.2.5 ESCape bit (ESC) . 111
7.2.3.2.6 Number of transceivers . 111
7.2.3.2.7 Extended RF carrier information available (Mc) . 112
7.2.3.2.8 RF carriers available (RF-cars) . 112
7.2.3.2.9 Spare bits (SPR) . 112
7.2.3.2.10 Carrier number. 112
7.2.3.2.11 Extended static system information available (Ext-System-Info) and spare bit . 113
7.2.3.2.12 Primary receiver Scan Carrier Number (PSCN) . 113
7.2.3.3 Extended RF carrier information part 1 . 113
7.2.3.3.1 General, Q = 2 (hex) . 113
H
7.2.3.3.2 Further RF carrier extensions . 114
7.2.3.3.3 Number of RF carriers . 114
7.2.3.4 Fixed part capabilities . 114
7.2.3.4.1 General, Q = 3 (hex) . 114
H
7.2.3.4.2 Standard capabilities . 114
7.2.3.5 Extended fixed part capabilities . 115
7.2.3.5.1 General, Q = 4 (hex) . 115
H
7.2.3.5.2 Extended Physical and MAC layer capabiliti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.