ETSI EN 300 220-1 V3.1.1 (2017-02)

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 1: Technical characteristics and methods of measurement

REN/ERM-TG28-533

Naprave kratkega dosega (SRD), ki delujejo v frekvenčnem območju od 25 MHz do 1000 MHz - 1. del: Tehnične karakteristike in merilne metode

Ta dokument določa tehnične karakteristike in preskusne metode za ocenjevanje skladnosti naprav kratkega dosega v frekvenčnem območju od 25 MHz do 1 GHz.

General Information

• Status: Published
• Publication Date: 07-Feb-2017
• Technical Committee: ERM TG28 - ERM Generic SRD's
• Current Stage: 12 - Completion
• Due Date: 10-Feb-2017
• Completion Date: 08-Feb-2017
• Ref Project: SIST EN 300 220-1 V3.1.1:2017 - Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz - Part 1: Technical characteristics and methods of measurement

Standards Content (Sample)

Draft ETSI EN 300 220-1 V3.1.0 (2016-05)

EUROPEAN STANDARD
Short Range Devices (SRD) operating
in the frequency range 25 MHz to 1 000 MHz;
Part 1: Technical characteristics and methods of measurement

2 Draft ETSI EN 300 220-1 V3.1.0 (2016-05)

Reference
REN/ERM-TG28-533
Keywords
radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Draft ETSI EN 300 220-1 V3.1.0 (2016-05)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definitions, symbols and abbreviations . 11
3.1 Definitions . 11
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Conformance specification . 15
4.1 General performance criterion . 15
4.2 Equipment conformance requirements specification . 16
4.2.1 General . 16
4.2.2 Transmitter shut-off facility . 16
4.2.3 Receiver mute or squelch or battery saving circuit . 16
4.2.4 Auxiliary test equipment . 16
4.2.5 Receiver Category. 16
4.2.5.1 Description . 16
4.3 General conditions for testing . 17
4.3.1 Test signals . 17
4.3.1.1 Test signals for analogue speech . 17
4.3.1.2 Test signals for data . 17
4.3.2 Test power source . 18
4.3.2.0 General . 18
4.3.2.1 External test power source . 18
4.3.2.2 Internal test power source . 19
4.3.3 Normal test conditions . 19
4.3.3.1 Normal temperature and humidity . 19
4.3.3.2 Normal test power source . 19
4.3.3.2.1 Mains voltage . 19
4.3.3.2.2 Regulated lead-acid battery power sources . 19
4.3.3.2.3 Other power sources . 19
4.3.4 Extreme test conditions . 19
4.3.4.0 General requirement . 19
4.3.4.1 Extreme temperatures . 19
4.3.4.1.0 Procedure for tests at extreme temperatures . 19
4.3.4.1.1 General requirements . 19
4.3.4.1.2 Extreme temperature ranges . 20
4.3.4.2 Extreme test source voltages . 20
4.3.4.2.1 Mains voltage . 20
4.3.4.2.2 Regulated lead-acid battery power sources . 21
4.3.4.2.3 Power sources using other types of batteries . 21
4.3.4.2.4 Other power sources . 21
4.3.5 Testing of frequency agile or hopping equipment . 21
4.3.6 Testing of equipment with adaptive power levels . 21
4.3.7 Artificial antenna . 21
4.3.8 Equipment without an external RF connector . 22
4.3.8.0 General conditions . 22
4.3.8.1 Equipment with an internal connector. 22
4.3.8.2 Equipment with a temporary antenna connector . 22
4.3.8.3 Use of a Test Fixture . 22
ETSI
4 Draft ETSI EN 300 220-1 V3.1.0 (2016-05)
4.3.9 Conducted and radiated measurements . 22
4.3.10 Measuring receiver . 23
4.3.10.0 Description . 23
4.3.10.1 Reference bandwidth . 23
4.4 Interpretation of the measurement results . 24
5 Parameters and tests . 25
5.1 Operating frequency . 25
5.1.1 Description . 25
5.1.2 Conformance. 25
5.2 Effective Radiated Power . 25
5.2.1 Description . 25
5.2.2 Conformance. 25
5.2.2.1 Effective Radiated Power (conducted measurement) . 25
5.2.2.1.0 General . 25
5.2.2.1.1 Test conditions . 25
5.2.2.1.2 Measurement procedure . 25
5.2.2.2 Effective radiated power (radiated measurement) . 26
5.2.2.2.0 General . 26
5.2.2.2.1 Test conditions . 26
5.2.2.2.2 Measurement procedure . 26
5.3 Maximum Effective Radiated Power spectral density . 27
5.3.1 Description . 27
5.3.2 Conformance. 27
5.3.2.1 Test conditions . 27
5.3.2.1.1 General requirements . 27
5.3.2.1.2 Measurement procedure . 27
5.4 Duty Cycle. 29
5.4.1 Description . 29
5.4.2 Conformance. 30
5.5 DCT . 30
5.5.1 Description . 30
5.5.2 Conformance. 30
5.5.2.1 Test conditions . 30
5.5.2.2 Measurement procedure . 30
5.6 Occupied Bandwidth . 32
5.6.1 Description . 32
5.6.2 Reference limits . 32
5.6.3 Conformance. 32
5.6.3.1 Test conditions . 32
5.6.3.2 Radiated measurement . 32
5.6.3.3 Conducted measurement . 32
5.6.3.4 Measurement procedure . 33
5.6.3.4.0 General . 33
5.6.3.4.1 Method using the build in measurement procedure of the spectrum analyser . 33
5.6.3.4.2 Method using the -23 dBc measurement procedure . 33
5.6.3.5 Recording . 34
5.7 Frequency error . 34
5.7.1 Description . 34
5.7.2 Conformance. 34
5.7.2.1 Test conditions . 34
5.7.2.2 Conducted measurement . 35
5.7.2.3 Radiated measurement . 35
5.7.2.4 Measurement procedure . 35
5.7.2.5 Recording . 35
5.8 Tx Out Of Band Emissions. 36
5.8.1 Description . 36
5.8.2 Reference limits . 37
5.8.3 Conformance. 37
5.8.3.1 Test conditions . 37
5.8.3.2 Radiated measurement . 37
5.8.3.3 Conducted measurement . 37
ETSI
5 Draft ETSI EN 300 220-1 V3.1.0 (2016-05)
5.8.3.4 Measurement procedure . 38
5.9 Unwanted emissions in the spurious domain. 39
5.9.1 Description . 39
5.9.1.1 Unwanted emissions for a TX mode . 39
5.9.1.2 Unwanted emissions for all other modes . 39
5.9.2 Reference limits . 40
5.9.3 Conformance. 40
5.9.3.1 Test conditions . 40
5.9.3.2 Test conditions for TX mode . 40
5.9.3.3 Measurement procedure . 41
5.9.3.3.1 Conducted measurement. 41
5.9.3.3.2 Radiated measurement . 41
5.10 Transient power . 42
5.10.1 Description . 42
5.10.2 Reference limits . 42
5.10.3 Conformance. 42
5.10.3.1 Test conditions . 42
5.10.3.2 Measurement procedure . 42
5.11 Adjacent Channel Power . 43
5.11.1 Description . 43
5.11.2 Reference limits . 43
5.11.2.1 Limits for equipment with operating channel width less than 25 kHz . 43
5.11.3 Conformance. 43
5.11.3.1 Test conditions . 43
5.11.3.2 Radiated measurement . 44
5.11.3.3 Conducted measurement . 44
5.11.3.4 Measurement procedure . 44
5.12 TX behaviour under Low Voltage Conditions . 45
5.12.1 Description . 45
5.12.2 Reference limits . 45
5.12.3 Conformance. 45
5.12.3.1 Test conditions . 45
5.12.3.2 Measurement procedure . 45
5.13 Void . 45
5.14 Adaptive Power Control . 45
5.14.1 Description . 45
5.14.2 Reference limits . 45
5.14.3 Conformance. 46
5.14.3.1 Test conditions . 46
5.14.3.2 Radiated measurement . 46
5.14.3.3 Conducted measurement . 46
5.14.3.4 Measurement procedure . 46
5.15 RX sensitivity level . 47
5.15.1 Description . 47
5.15.2 Reference limits . 47
5.15.3 Conformance. 48
5.15.3.1 Test conditions . 48
5.15.3.2 Radiated measurement . 48
5.15.3.3 Conducted measurement . 48
5.15.3.4 Measurement procedure . 48
5.16 Adjacent channel selectivity . 49
5.16.1 Description . 49
5.16.2 Reference limit for receiver category 1 . 49
5.16.3 Conformance. 49
5.16.3.1 Test conditions . 49
5.16.3.2 Radiated measurement . 49
5.16.3.3 Conducted measurement . 49
5.16.3.4 Measurement procedure . 50
5.17 Receiver saturation at Adjacent Channel . 50
5.17.1 Description . 50
5.17.2 Reference limit for receiver category 1 . 51
5.17.3 Conformance. 51
ETSI
6 Draft ETSI EN 300 220-1 V3.1.0 (2016-05)
5.17.3.1 Test Conditions . 51
5.17.3.2 Radiated measurement . 51
5.17.3.3 Conducted measurement . 51
5.17.3.4 Measurement procedure . 51
5.18 Spurious response rejection . 52
5.18.1 Description . 52
5.18.2 Reference limit for receiver category 1 . 52
5.18.3 Conformance. 52
5.18.3.1 Test Conditions . 52
5.18.3.2 Radiated measurement . 52
5.18.3.3 Conducted measurement . 52
5.18.3.4 Measurement procedure . 52
5.19 Blocking . 53
5.19.1 Description . 53
5.19.2 Reference limits for receiver category 3 . 53
5.19.3 Reference limits for receiver category 2 . 54
5.19.4 Reference limits for receiver category 1.5 . 54
5.19.5 Reference limits for receiver category 1 . 54
5.19.6 Conformance. 54
5.19.6.1 Test conditions . 54
5.19.6.2 Radiated measurement . 55
5.19.6.3 Conducted measurement . 55
5.19.6.4 Measurement procedure . 55
5.20 Behaviour at high wanted signal level . 56
5.20.1 Description . 56
5.20.2 Reference limits for receiver category 1 . 56
5.20.3 Conformance. 56
5.21 Clear Channel Assessment threshold . 56
5.21.1 Description . 56
5.21.2 Reference CCA limits . 57
5.21.3 Conformance. 57
5.21.3.1 Test conditions . 57
5.21.3.2 Radiated measurement . 57
5.21.3.3 Conducted measurement . 57
5.21.3.4 Measurement procedure . 58
5.22 Polite spectrum access . 59
5.22.1 Description . 59
5.22.2 Reference limits for polite spectrum access . 59
5.22.3 Conformance. 59
5.23 Acknowledge transmissions . 60
5.23.1 Description . 60
5.23.2 Conformance. 60
5.24 Adaptive Frequency Agility . 60
5.24.1 Description . 60
5.24.2 Conformance. 60
Annex A (normative): Technical performance of the test equipment . 61
A.1 Spectrum analyser . 61
A.2 Signal Generators and Signal Sources . 61
Annex B (normative): Test Fixture . 62
B.0 Description of test-fixture . 62
B.1 Validation of the test-fixture in the temperature chamber . 63
B.2 Mode of use . 65
Annex C (normative): Test sites and arrangements for radiated measurement . 66
C.0 Introduction . 66
C.1 Radiation test sites . 66
ETSI
7 Draft ETSI EN 300 220-1 V3.1.0 (2016-05)
C.1.1 Open Area Test Site (OATS) . 66
C.1.2 Semi Anechoic Room . 67
C.1.3 Fully Anechoic Room (FAR) . 68
C.1.4 Measurement Distance . 70
C.2 Antennas . 70
C.2.0 General . 70
C.2.1 Measurement antenna . 70
C.2.2 Substitution antenna . 70
C.3 Guidance on the use of radiation test sites . 71
C.3.0 General . 71
C.3.1 Power supplies for the battery powered EUT . 71
C.3.2 Site preparation . 71
C.4 Coupling of signals . 72
C.4.1 General . 72
C.4.2 Data Signals. 72
C.5 Void . 72
C.6 Measurement procedures for radiated measurement . 72
C.6.0 General . 72
C.6.1 Radiated measurements in an OATS or SAR . 72
C.6.2 Radiated measurements in a FAR . 73
C.6.3 Substitution measurement . 73
C.6.4 Radiated measurement for receivers. 73
C.7 Guidance for testing technical requirements . 74
C.7.0 General . 74
C.7.1 Radio test suites and corresponding test sites . 74
Annex D (informative): Bibliography . 75
Annex E (informative): Change History . 76
History . 77

ETSI
8 Draft ETSI EN 300 220-1 V3.1.0 (2016-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest
...

Final draft ETSI EN 300 220-1 V3.1.1 (2016-11)

EUROPEAN STANDARD
Short Range Devices (SRD) operating
in the frequency range 25 MHz to 1 000 MHz;
Part 1: Technical characteristics and
methods of measurement
2 Final draft ETSI EN 300 220-1 V3.1.1 (2016-11)

Reference
REN/ERM-TG28-533
Keywords
radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI EN 300 220-1 V3.1.1 (2016-11)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definitions, symbols and abbreviations . 11
3.1 Definitions . 11
3.2 Symbols . 14
3.3 Abbreviations . 15
4 Conformance specification . 16
4.1 General performance criterion . 16
4.2 Equipment conformance requirements specification . 16
4.2.1 General . 16
4.2.2 Transmitter shut-off facility . 16
4.2.3 Receiver mute or squelch or battery saving circuit . 16
4.2.4 Auxiliary test equipment . 16
4.2.5 Receiver Category. 17
4.2.5.1 Description . 17
4.3 General conditions for testing . 17
4.3.1 Test signals . 17
4.3.1.1 Test signals for data . 17
4.3.2 Test power source . 18
4.3.2.0 General . 18
4.3.2.1 External test power source . 18
4.3.2.2 Internal test power source . 19
4.3.3 Normal test conditions . 19
4.3.3.1 Normal temperature and humidity . 19
4.3.3.2 Normal test power source . 19
4.3.3.2.1 Mains voltage . 19
4.3.3.2.2 Regulated lead-acid battery power sources . 19
4.3.3.2.3 Other power sources . 19
4.3.4 Extreme test conditions . 19
4.3.4.0 General requirement . 19
4.3.4.1 Extreme temperatures . 20
4.3.4.1.0 Procedure for tests at extreme temperatures . 20
4.3.4.1.1 General requirements . 20
4.3.4.1.2 Extreme temperature ranges . 20
4.3.4.2 Extreme test source voltages . 21
4.3.4.2.1 Mains voltage . 21
4.3.4.2.2 Regulated lead-acid battery power sources . 21
4.3.4.2.3 Power sources using other types of batteries . 21
4.3.4.2.4 Other power sources . 21
4.3.5 Testing of frequency agile or hopping equipment . 21
4.3.6 Testing of equipment with adaptive power levels . 22
4.3.7 Artificial antenna . 22
4.3.8 Equipment without an external RF connector . 22
4.3.8.0 General conditions . 22
4.3.8.1 Equipment with an internal connector. 22
4.3.8.2 Equipment with a temporary antenna connector . 22
4.3.8.3 Use of a Test Fixture . 22
4.3.9 Conducted and radiated measurements . 22
ETSI
4 Final draft ETSI EN 300 220-1 V3.1.1 (2016-11)
4.3.10 Measuring receiver . 23
4.3.10.0 Description . 23
4.3.10.1 Reference bandwidth . 24
4.4 Interpretation of the measurement results . 24
5 Parameters and tests . 25
5.1 Operating frequency . 25
5.1.1 Description . 25
5.1.2 Conformance. 25
5.2 Effective Radiated Power . 25
5.2.1 Description . 25
5.2.2 Conformance. 26
5.2.2.1 Effective Radiated Power (conducted measurement) . 26
5.2.2.1.0 General . 26
5.2.2.1.1 Test conditions . 26
5.2.2.1.2 Measurement procedure . 26
5.2.2.2 Effective radiated power (radiated measurement) . 26
5.2.2.2.0 General . 26
5.2.2.2.1 Test conditions . 26
5.2.2.2.2 Measurement procedure . 27
5.3 Maximum Effective Radiated Power spectral density . 27
5.3.1 Description . 27
5.3.2 Conformance. 27
5.3.2.1 Test conditions . 27
5.3.2.1.1 General requirements . 27
5.3.2.1.2 Measurement procedure . 28
5.4 Duty Cycle. 28
5.4.1 Description . 28
5.4.2 Conformance. 29
5.5 Duty Cycle Template . 29
5.5.1 Description . 29
5.5.2 Conformance. 29
5.5.2.1 Test conditions . 29
5.5.2.2 Measurement procedure . 30
5.6 Occupied Bandwidth . 31
5.6.1 Description . 31
5.6.2 Reference limits . 31
5.6.3 Conformance. 31
5.6.3.1 Test conditions . 31
5.6.3.2 Radiated measurement . 31
5.6.3.3 Conducted measurement . 31
5.6.3.4 Measurement procedure . 32
5.6.3.5 Recording . 32
5.7 Frequency error . 33
5.7.1 Description . 33
5.7.2 Conformance. 33
5.7.2.1 Test conditions . 33
5.7.2.2 Conducted measurement . 33
5.7.2.3 Radiated measurement . 33
5.7.2.4 Measurement procedure . 33
5.7.2.5 Recording . 33
5.8 Tx Out Of Band Emissions. 34
5.8.1 Description . 34
5.8.2 Reference limits . 35
5.8.3 Conformance. 36
5.8.3.1 Test conditions . 36
5.8.3.2 Radiated measurement . 36
5.8.3.3 Conducted measurement . 36
5.8.3.4 Measurement procedure . 36
5.9 Unwanted emissions in the spurious domain. 38
5.9.1 Description . 38
5.9.1.1 Unwanted emissions for a TX mode . 38
ETSI
5 Final draft ETSI EN 300 220-1 V3.1.1 (2016-11)
5.9.1.2 Unwanted emissions for all other modes . 38
5.9.2 Reference limits . 38
5.9.3 Conformance. 38
5.9.3.1 Test conditions for TX mode . 38
5.9.3.2 Test conditions for RX and all other modes . 39
5.9.3.3 Measurement procedure . 39
5.9.3.3.1 Conducted measurement. 39
5.9.3.3.2 Radiated measurement . 40
5.10 Transient power . 40
5.10.1 Description . 40
5.10.2 Reference limits . 41
5.10.3 Conformance. 41
5.10.3.1 Test conditions . 41
5.10.3.2 Measurement procedure . 41
5.11 Adjacent Channel Power . 42
5.11.1 Description . 42
5.11.2 Reference limits . 42
5.11.3 Conformance. 42
5.11.3.1 Test conditions . 42
5.11.3.2 Radiated measurement . 42
5.11.3.3 Conducted measurement . 43
5.11.3.4 Measurement procedure . 43
5.12 TX behaviour under Low Voltage Conditions . 44
5.12.1 Description . 44
5.12.2 Reference limits . 44
5.12.3 Conformance. 44
5.12.3.1 Test conditions . 44
5.12.3.2 Measurement procedure . 44
5.13 Adaptive Power Control . 44
5.13.1 Description . 44
5.13.2 Reference limits . 44
5.13.3 Conformance. 45
5.13.3.1 Test conditions . 45
5.13.3.2 Radiated measurement . 45
5.13.3.3 Conducted measurement . 45
5.13.3.4 Measurement procedure . 45
5.14 RX sensitivity level . 46
5.14.1 Description . 46
5.14.2 Reference limits . 46
5.14.3 Conformance. 47
5.14.3.1 Test conditions . 47
5.14.3.2 Radiated measurement . 47
5.14.3.3 Conducted measurement . 47
5.14.3.4 Measurement procedure . 47
5.15 Adjacent channel selectivity . 48
5.15.1 Description . 48
5.15.2 Reference limit for receiver category 1 . 48
5.15.3 Conformance. 48
5.15.3.1 Test conditions . 48
5.15.3.2 Radiated measurement . 48
5.15.3.3 Conducted measurement . 48
5.15.3.4 Measurement procedure . 49
5.16 Receiver saturation at Adjacent Channel . 49
5.16.1 Description . 49
5.16.2 Reference limit for receiver category 1 . 50
5.16.3 Conformance. 50
5.16.3.1 Test Conditions . 50
5.16.3.2 Radiated measurement . 50
5.16.3.3 Conducted measurement . 50
5.16.3.4 Measurement procedure . 50
5.17 Spurious response rejection . 51
5.17.1 Description . 51
ETSI
6 Final draft ETSI EN 300 220-1 V3.1.1 (2016-11)
5.17.2 Reference limit for receiver category 1 . 51
5.17.3 Conformance. 51
5.17.3.1 Test Conditions . 51
5.17.3.2 Radiated measurement . 51
5.17.3.3 Conducted measurement . 51
5.17.3.4 Measurement procedure . 51
5.18 Blocking . 52
5.18.1 Description . 52
5.18.2 Reference limits for receiver category 3 . 52
5.18.3 Reference limits for receiver category 2 . 53
5.18.4 Reference limits for receiver category 1.5 . 53
5.18.5 Reference limits for receiver category 1 . 53
5.18.6 Conformance. 53
5.18.6.1 Test conditions . 53
5.18.6.2 Radiated measurement . 54
5.18.6.3 Conducted measurement . 54
5.18.6.4 Measurement procedure . 54
5.19 Behaviour at high wanted signal level . 55
5.19.1 Description . 55
5.19.2 Reference limits for receiver category 1 . 55
5.19.3 Conformance. 55
5.20 Void . 56
5.21 Polite spectrum access . 56
5.21.1 Description . 56
5.21.2 Clear Channel Assessment threshold . 56
5.21.2.1 Description . 56
5.21.2.2 Reference CCA limits . 56
5.21.2.3 Conformance . 56
5.21.2.3.1 Test conditions . 56
5.21.2.3.2 Radiated measurement . 56
5.21.2.3.3 Conducted measurement. 57
5.21.2.3.4 Measurement procedure . 57
5.21.3 Polite spectrum access timing parameters . 58
5.21.3.1 Reference limits for polite spectrum access timing parameters . 58
5.21.3.2 Conformance . 59
5.21.4 Adaptive Frequency Agility . 59
5.21.4.1 Description . 59
5.21.4.2 Conformance . 60
5.22 Bi-Directional Operation Verification . 60
5.22.1 Description . 60
5.22.2 Conformance. 60
Annex A (normative): Technical performance of the test equipment . 61
A.1 Spectrum analyser . 61
A.2 Signal Generators and Signal Sources . 61
Annex B (normative): Test Fixture . 62
B.0 Description of test-fixture . 62
B.1 Mode of use . 63
Annex C (normative): Test sites and arrangements for radiated measurement . 64
C.0 Introduction . 64
C.1 Radiation test sites . 64
C.1.1 Open Area Test Site (OATS) . 64
C.1.2 Semi Anechoic Room . 65
C.1.3 Fully Anechoic Room (FAR) . 66
C.1.4 Measurement Distance . 68
C.2 Antennas . 68
ETSI
7 Final draft ETSI EN 300 220-1 V3.1.1 (2016-11)
C.2.0 General . 68
C.2.1 Measurement antenna . 68
C.2.2 Substitution antenna . 68
C.3 Guidance on the use of radiation test sites . 69
C.3.0 General . 69
C.3.1 Power supplies for the battery powered EUT . 69
C.3.2 Site preparation . 69
C.4 Coupling of signals . 70
C.4.1 General . 70
C.4.2 Data Signals. 70
C.5 Measurement procedures for radiated measurement . 70
C.5.0 General . 70
C.5.1 Radiated measurements in an OATS or SAR . 70
C.5.2 Radiated measurements in a FAR . 71
C.5.3 Substitution measurement . 71
C.5.4 Radiated measurement for receivers. 72
C.6 Guidance for testing technical requirements . 72
C.6.0 General . 72
C.6.1 Radio test suites and corresponding test sites . 72
Annex D (informative): Bibliography . 73
Annex E (informative): Change History . 74
History . 75

ETSI
8 Final draft ETSI EN 300 220-1 V3.1.1 (2016-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility
and Radio spectrum Matters (ERM), and is now submitted for Vote phase of the ETSI standards EN Approval
Procedure.
The present document is part 1 of a multi-part deliverable covering Short Range Devices (SRD), as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonised Standard covering the essential requirements of article 3.2
...

EUROPEAN STANDARD
Short Range Devices (SRD) operating
in the frequency range 25 MHz to 1 000 MHz;
Part 1: Technical characteristics and
methods of measurement
2 ETSI EN 300 220-1 V3.1.1 (2017-02)

Reference
REN/ERM-TG28-533
Keywords
radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 300 220-1 V3.1.1 (2017-02)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definitions, symbols and abbreviations . 11
3.1 Definitions . 11
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Conformance specification . 15
4.1 General performance criterion . 15
4.2 Equipment conformance requirements specification . 16
4.2.1 General . 16
4.2.2 Transmitter shut-off facility . 16
4.2.3 Receiver mute or squelch or battery saving circuit . 16
4.2.4 Auxiliary test equipment . 16
4.2.5 Receiver Category. 16
4.2.5.1 Description . 16
4.3 General conditions for testing . 17
4.3.1 Test signals . 17
4.3.1.1 Test signals for data . 17
4.3.2 Test power source . 18
4.3.2.0 General . 18
4.3.2.1 External test power source . 18
4.3.2.2 Internal test power source . 18
4.3.3 Normal test conditions . 19
4.3.3.1 Normal temperature and humidity . 19
4.3.3.2 Normal test power source . 19
4.3.3.2.1 Mains voltage . 19
4.3.3.2.2 Regulated lead-acid battery power sources . 19
4.3.3.2.3 Other power sources . 19
4.3.4 Extreme test conditions . 19
4.3.4.0 General requirement . 19
4.3.4.1 Extreme temperatures . 19
4.3.4.1.0 Procedure for tests at extreme temperatures . 19
4.3.4.1.1 General requirements . 19
4.3.4.1.2 Extreme temperature ranges . 20
4.3.4.2 Extreme test source voltages . 20
4.3.4.2.1 Mains voltage . 20
4.3.4.2.2 Regulated lead-acid battery power sources . 20
4.3.4.2.3 Power sources using other types of batteries . 21
4.3.4.2.4 Other power sources . 21
4.3.5 Testing of frequency agile or hopping equipment . 21
4.3.6 Testing of equipment with adaptive power levels . 21
4.3.7 Artificial antenna . 21
4.3.8 Equipment without an external RF connector . 21
4.3.8.0 General conditions . 21
4.3.8.1 Equipment with an internal connector. 22
4.3.8.2 Equipment with a temporary antenna connector . 22
4.3.8.3 Use of a Test Fixture . 22
4.3.9 Conducted and radiated measurements . 22
ETSI
4 ETSI EN 300 220-1 V3.1.1 (2017-02)
4.3.10 Measuring receiver . 23
4.3.10.0 Description . 23
4.3.10.1 Reference bandwidth . 23
4.4 Interpretation of the measurement results . 24
5 Parameters and tests . 25
5.1 Operating frequency . 25
5.1.1 Description . 25
5.1.2 Conformance. 25
5.2 Effective Radiated Power . 25
5.2.1 Description . 25
5.2.2 Conformance. 26
5.2.2.1 Effective Radiated Power (conducted measurement) . 26
5.2.2.1.0 General . 26
5.2.2.1.1 Test conditions . 26
5.2.2.1.2 Measurement procedure . 26
5.2.2.2 Effective radiated power (radiated measurement) . 26
5.2.2.2.0 General . 26
5.2.2.2.1 Test conditions . 26
5.2.2.2.2 Measurement procedure . 27
5.3 Maximum Effective Radiated Power spectral density . 27
5.3.1 Description . 27
5.3.2 Conformance. 27
5.3.2.1 Test conditions . 27
5.3.2.1.1 General requirements . 27
5.3.2.1.2 Measurement procedure . 28
5.4 Duty Cycle. 28
5.4.1 Description . 28
5.4.2 Conformance. 29
5.5 Duty Cycle Template . 29
5.5.1 Description . 29
5.5.2 Conformance. 29
5.5.2.1 Test conditions . 29
5.5.2.2 Measurement procedure . 30
5.6 Occupied Bandwidth . 31
5.6.1 Description . 31
5.6.2 Reference limits . 31
5.6.3 Conformance. 31
5.6.3.1 Test conditions . 31
5.6.3.2 Radiated measurement . 31
5.6.3.3 Conducted measurement . 31
5.6.3.4 Measurement procedure . 31
5.6.3.5 Recording . 32
5.7 Frequency error . 32
5.7.1 Description . 32
5.7.2 Conformance. 32
5.7.2.1 Test conditions . 32
5.7.2.2 Conducted measurement . 33
5.7.2.3 Radiated measurement . 33
5.7.2.4 Measurement procedure . 33
5.7.2.5 Recording . 33
5.8 Tx Out Of Band Emissions. 33
5.8.1 Description . 33
5.8.2 Reference limits . 34
5.8.3 Conformance. 35
5.8.3.1 Test conditions . 35
5.8.3.2 Radiated measurement . 35
5.8.3.3 Conducted measurement . 35
5.8.3.4 Measurement procedure . 36
5.9 Unwanted emissions in the spurious domain. 37
5.9.1 Description . 37
5.9.1.1 Unwanted emissions for a TX mode . 37
ETSI
5 ETSI EN 300 220-1 V3.1.1 (2017-02)
5.9.1.2 Unwanted emissions for all other modes . 38
5.9.2 Reference limits . 38
5.9.3 Conformance. 38
5.9.3.1 Test conditions for TX mode . 38
5.9.3.2 Test conditions for RX and all other modes . 39
5.9.3.3 Measurement procedure . 39
5.9.3.3.1 Conducted measurement. 39
5.9.3.3.2 Radiated measurement . 39
5.10 Transient power . 40
5.10.1 Description . 40
5.10.2 Reference limits . 40
5.10.3 Conformance. 40
5.10.3.1 Test conditions . 40
5.10.3.2 Measurement procedure . 40
5.11 Adjacent Channel Power . 41
5.11.1 Description . 41
5.11.2 Reference limits . 41
5.11.3 Conformance. 42
5.11.3.1 Test conditions . 42
5.11.3.2 Radiated measurement . 42
5.11.3.3 Conducted measurement . 42
5.11.3.4 Measurement procedure . 42
5.12 TX behaviour under Low Voltage Conditions . 43
5.12.1 Description . 43
5.12.2 Reference limits . 43
5.12.3 Conformance. 43
5.12.3.1 Test conditions . 43
5.12.3.2 Measurement procedure . 44
5.13 Adaptive Power Control . 44
5.13.1 Description . 44
5.13.2 Reference limits . 44
5.13.3 Conformance. 44
5.13.3.1 Test conditions . 44
5.13.3.2 Radiated measurement . 45
5.13.3.3 Conducted measurement . 45
5.13.3.4 Measurement procedure . 45
5.14 RX sensitivity level . 46
5.14.1 Description . 46
5.14.2 Reference limits . 46
5.14.3 Conformance. 46
5.14.3.1 Test conditions . 46
5.14.3.2 Radiated measurement . 46
5.14.3.3 Conducted measurement . 47
5.14.3.4 Measurement procedure . 47
5.15 Adjacent channel selectivity . 47
5.15.1 Description . 47
5.15.2 Reference limit for receiver category 1 . 48
5.15.3 Conformance. 48
5.15.3.1 Test conditions . 48
5.15.3.2 Radiated measurement . 48
5.15.3.3 Conducted measurement . 48
5.15.3.4 Measurement procedure . 48
5.16 Receiver saturation at Adjacent Channel . 49
5.16.1 Description . 49
5.16.2 Reference limit for receiver category 1 . 49
5.16.3 Conformance. 49
5.16.3.1 Test Conditions . 49
5.16.3.2 Radiated measurement . 50
5.16.3.3 Conducted measurement . 50
5.16.3.4 Measurement procedure . 50
5.17 Spurious response rejection . 50
5.17.1 Description . 50
ETSI
6 ETSI EN 300 220-1 V3.1.1 (2017-02)
5.17.2 Reference limit for receiver category 1 . 51
5.17.3 Conformance. 51
5.17.3.1 Test Conditions . 51
5.17.3.2 Radiated measurement . 51
5.17.3.3 Conducted measurement . 51
5.17.3.4 Measurement procedure . 51
5.18 Blocking . 52
5.18.1 Description . 52
5.18.2 Reference limits for receiver category 3 . 52
5.18.3 Reference limits for receiver category 2 . 52
5.18.4 Reference limits for receiver category 1.5 . 53
5.18.5 Reference limits for receiver category 1 . 53
5.18.6 Conformance. 53
5.18.6.1 Test conditions . 53
5.18.6.2 Radiated measurement . 53
5.18.6.3 Conducted measurement . 54
5.18.6.4 Measurement procedure . 54
5.19 Behaviour at high wanted signal level . 55
5.19.1 Description . 55
5.19.2 Reference limits for receiver category 1 . 55
5.19.3 Conformance. 55
5.20 Void . 55
5.21 Polite spectrum access . 55
5.21.1 Description . 55
5.21.2 Clear Channel Assessment threshold . 56
5.21.2.1 Description . 56
5.21.2.2 Reference CCA limits . 56
5.21.2.3 Conformance . 56
5.21.2.3.1 Test conditions . 56
5.21.2.3.2 Radiated measurement . 56
5.21.2.3.3 Conducted measurement. 57
5.21.2.3.4 Measurement procedure . 57
5.21.3 Polite spectrum access timing parameters . 58
5.21.3.1 Reference limits for polite spectrum access timing parameters . 58
5.21.3.2 Conformance . 58
5.21.4 Adaptive Frequency Agility . 59
5.21.4.1 Description . 59
5.21.4.2 Conformance . 59
5.22 Bi-Directional Operation Verification . 59
5.22.1 Description . 59
5.22.2 Conformance. 59
Annex A (normative): Technical performance of the test equipment . 60
A.1 Spectrum analyser . 60
A.2 Signal Generators and Signal Sources . 60
Annex B (normative): Test Fixture . 61
B.0 Description of test-fixture . 61
B.1 Mode of use . 62
Annex C (normative): Test sites and arrangements for radiated measurement . 63
C.0 Introduction . 63
C.1 Radiation test sites . 63
C.1.1 Open Area Test Site (OATS) . 63
C.1.2 Semi Anechoic Room . 64
C.1.3 Fully Anechoic Room (FAR) . 65
C.1.4 Measurement Distance . 67
C.2 Antennas . 67
ETSI
7 ETSI EN 300 220-1 V3.1.1 (2017-02)
C.2.0 General . 67
C.2.1 Measurement antenna . 67
C.2.2 Substitution antenna . 67
C.3 Guidance on the use of radiation test sites . 68
C.3.0 General . 68
C.3.1 Power supplies for the battery powered EUT . 68
C.3.2 Site preparation . 68
C.4 Coupling of signals . 69
C.4.1 General . 69
C.4.2 Data Signals. 69
C.5 Measurement procedures for radiated measurement . 69
C.5.0 General . 69
C.5.1 Radiated measurements in an OATS or SAR . 69
C.5.2 Radiated measurements in a FAR . 70
C.5.3 Substitution measurement . 70
C.5.4 Radiated measurement for receivers. 71
C.6 Guidance for testing technical requirements . 71
C.6.0 General . 71
C.6.1 Radio test suites and corresponding test sites . 71
Annex D (informative): Bibliography . 72
Annex E (informative): Change History . 73
History . 74

ETSI
8 ETSI EN 300 220-1 V3.1.1 (2017-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and
Radio spectrum Matters (ERM).
The present document is part 1 of a multi-part deliverable covering Short Range Devices (SRD), as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non
specific radio equipment";
Part 3-1: "Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low
duty cycle
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz - Part 1: Technical characteristics and methods of measurement33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:ETSI EN 300 220-1 V3.1.1 (2017-02)SIST EN 300 220-1 V3.1.1:2017en01-april-2017SIST EN 300 220-1 V3.1.1:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD SIST EN 300 220-1 V3.1.1:2017

ETSI ETSI EN 300 220-1 V3.1.1 (2017-02) 2
Reference REN/ERM-TG28-533 Keywords radio, SRD, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 220-1 V3.1.1:2017

ETSI ETSI EN 300 220-1 V3.1.1 (2017-02) 3 Contents Intellectual Property Rights . 8 Foreword . 8 Modal verbs terminology . 8 Introduction . 9 1 Scope . 10 2 References . 10 2.1 Normative references . 10 2.2 Informative references . 10 3 Definitions, symbols and abbreviations . 11 3.1 Definitions . 11 3.2 Symbols . 14 3.3 Abbreviations . 14 4 Conformance specification . 15 4.1 General performance criterion . 15 4.2 Equipment conformance requirements specification . 16 4.2.1 General . 16 4.2.2 Transmitter shut-off facility . 16 4.2.3 Receiver mute or squelch or battery saving circuit . 16 4.2.4 Auxiliary test equipment . 16 4.2.5 Receiver Category. 16 4.2.5.1 Description . 16 4.3 General conditions for testing . 17 4.3.1 Test signals . 17 4.3.1.1 Test signals for data . 17 4.3.2 Test power source . 18 4.3.2.0 General . 18 4.3.2.1 External test power source . 18 4.3.2.2 Internal test power source . 18 4.3.3 Normal test conditions . 19 4.3.3.1 Normal temperature and humidity . 19 4.3.3.2 Normal test power source . 19 4.3.3.2.1 Mains voltage . 19 4.3.3.2.2 Regulated lead-acid battery power sources . 19 4.3.3.2.3 Other power sources . 19 4.3.4 Extreme test conditions . 19 4.3.4.0 General requirement . 19 4.3.4.1 Extreme temperatures . 19 4.3.4.1.0 Procedure for tests at extreme temperatures . 19 4.3.4.1.1 General requirements . 19 4.3.4.1.2 Extreme temperature ranges . 20 4.3.4.2 Extreme test source voltages . 20 4.3.4.2.1 Mains voltage . 20 4.3.4.2.2 Regulated lead-acid battery power sources . 20 4.3.4.2.3 Power sources using other types of batteries . 21 4.3.4.2.4 Other power sources . 21 4.3.5 Testing of frequency agile or hopping equipment . 21 4.3.6 Testing of equipment with adaptive power levels . 21 4.3.7 Artificial antenna . 21 4.3.8 Equipment without an external RF connector . 21 4.3.8.0 General conditions . 21 4.3.8.1 Equipment with an internal connector. 22 4.3.8.2 Equipment with a temporary antenna connector . 22 4.3.8.3 Use of a Test Fixture . 22 4.3.9 Conducted and radiated measurements . 22 SIST EN 300 220-1 V3.1.1:2017

ETSI ETSI EN 300 220-1 V3.1.1 (2017-02) 4 4.3.10 Measuring receiver . 23 4.3.10.0 Description . 23 4.3.10.1 Reference bandwidth . 23 4.4 Interpretation of the measurement results . 24 5 Parameters and tests . 25 5.1 Operating frequency . 25 5.1.1 Description . 25 5.1.2 Conformance. 25 5.2 Effective Radiated Power . 25 5.2.1 Description . 25 5.2.2 Conformance. 26 5.2.2.1 Effective Radiated Power (conducted measurement) . 26 5.2.2.1.0 General . 26 5.2.2.1.1 Test conditions . 26 5.2.2.1.2 Measurement procedure . 26 5.2.2.2 Effective radiated power (radiated measurement) . 26 5.2.2.2.0 General . 26 5.2.2.2.1 Test conditions . 26 5.2.2.2.2 Measurement procedure . 27 5.3 Maximum Effective Radiated Power spectral density . 27 5.3.1 Description . 27 5.3.2 Conformance. 27 5.3.2.1 Test conditions . 27 5.3.2.1.1 General requirements . 27 5.3.2.1.2 Measurement procedure . 28 5.4 Duty Cycle. 28 5.4.1 Description . 28 5.4.2 Conformance. 29 5.5 Duty Cycle Template . 29 5.5.1 Description . 29 5.5.2 Conformance. 29 5.5.2.1 Test conditions . 29 5.5.2.2 Measurement procedure . 30 5.6 Occupied Bandwidth . 31 5.6.1 Description . 31 5.6.2 Reference limits . 31 5.6.3 Conformance. 31 5.6.3.1 Test conditions . 31 5.6.3.2 Radiated measurement . 31 5.6.3.3 Conducted measurement . 31 5.6.3.4 Measurement procedure . 31 5.6.3.5 Recording . 32 5.7 Frequency error . 32 5.7.1 Description . 32 5.7.2 Conformance. 32 5.7.2.1 Test conditions . 32 5.7.2.2 Conducted measurement . 33 5.7.2.3 Radiated measurement . 33 5.7.2.4 Measurement procedure . 33 5.7.2.5 Recording . 33 5.8 Tx Out Of Band Emissions. 33 5.8.1 Description . 33 5.8.2 Reference limits . 34 5.8.3 Conformance. 35 5.8.3.1 Test conditions . 35 5.8.3.2 Radiated measurement . 35 5.8.3.3 Conducted measurement . 35 5.8.3.4 Measurement procedure . 36 5.9 Unwanted emissions in the spurious domain. 37 5.9.1 Description . 37 5.9.1.1 Unwanted emissions for a TX mode . 37 SIST EN 300 220-1 V3.1.1:2017

ETSI ETSI EN 300 220-1 V3.1.1 (2017-02) 5 5.9.1.2 Unwanted emissions for all other modes . 38 5.9.2 Reference limits . 38 5.9.3 Conformance. 38 5.9.3.1 Test conditions for TX mode . 38 5.9.3.2 Test conditions for RX and all other modes . 39 5.9.3.3 Measurement procedure . 39 5.9.3.3.1 Conducted measurement. 39 5.9.3.3.2 Radiated measurement . 39 5.10 Transient power . 40 5.10.1 Description . 40 5.10.2 Reference limits . 40 5.10.3 Conformance. 40 5.10.3.1 Test conditions . 40 5.10.3.2 Measurement procedure . 40 5.11 Adjacent Channel Power . 41 5.11.1 Description . 41 5.11.2 Reference limits . 41 5.11.3 Conformance. 42 5.11.3.1 Test conditions . 42 5.11.3.2 Radiated measurement . 42 5.11.3.3 Conducted measurement . 42 5.11.3.4 Measurement procedure . 42 5.12 TX behaviour under Low Voltage Conditions . 43 5.12.1 Description . 43 5.12.2 Reference limits . 43 5.12.3 Conformance. 43 5.12.3.1 Test conditions . 43 5.12.3.2 Measurement procedure . 44 5.13 Adaptive Power Control . 44 5.13.1 Description . 44 5.13.2 Reference limits . 44 5.13.3 Conformance. 44 5.13.3.1 Test conditions . 44 5.13.3.2 Radiated measurement . 45 5.13.3.3 Conducted measurement . 45 5.13.3.4 Measurement procedure . 45 5.14 RX sensitivity level . 46 5.14.1 Description . 46 5.14.2 Reference limits . 46 5.14.3 Conformance. 46 5.14.3.1 Test conditions . 46 5.14.3.2 Radiated measurement . 46 5.14.3.3 Conducted measurement . 47 5.14.3.4 Measurement procedure . 47 5.15 Adjacent channel selectivity . 47 5.15.1 Description . 47 5.15.2 Reference limit for receiver category 1 . 48 5.15.3 Conformance. 48 5.15.3.1 Test conditions . 48 5.15.3.2 Radiated measurement . 48 5.15.3.3 Conducted measurement . 48 5.15.3.4 Measurement procedure . 48 5.16 Receiver saturation at Adjacent Channel . 49 5.16.1 Description . 49 5.16.2 Reference limit for receiver category 1 . 49 5.16.3 Conformance. 49 5.16.3.1 Test Conditions . 49 5.16.3.2 Radiated measurement . 50 5.16.3.3 Conducted measurement . 50 5.16.3.4 Measurement procedure . 50 5.17 Spurious response rejection . 50 5.17.1 Description . 50 SIST EN 300 220-1 V3.1.1:2017

ETSI ETSI EN 300 220-1 V3.1.1 (2017-02) 6 5.17.2 Reference limit for receiver category 1 . 51 5.17.3 Conformance. 51 5.17.3.1 Test Conditions . 51 5.17.3.2 Radiated measurement . 51 5.17.3.3 Conducted measurement . 51 5.17.3.4 Measurement procedure . 51 5.18 Blocking . 52 5.18.1 Description . 52 5.18.2 Reference limits for receiver category 3 . 52 5.18.3 Reference limits for receiver category 2 . 52 5.18.4 Reference limits for receiver category 1.5 . 53 5.18.5 Reference limits for receiver category 1 . 53 5.18.6 Conformance. 53 5.18.6.1 Test conditions . 53 5.18.6.2 Radiated measurement . 53 5.18.6.3 Conducted measurement . 54 5.18.6.4 Measurement procedure . 54 5.19 Behaviour at high wanted signal level . 55 5.19.1 Description . 55 5.19.2 Reference limits for receiver category 1 . 55 5.19.3 Conformance. 55 5.20 Void . 55 5.21 Polite spectrum access . 55 5.21.1 Description . 55 5.21.2 Clear Channel Assessment threshold . 56 5.21.2.1 Description . 56 5.21.2.2 Reference CCA limits . 56 5.21.2.3 Conformance . 56 5.21.2.3.1 Test conditions . 56 5.21.2.3.2 Radiated measurement . 56 5.21.2.3.3 Conducted measurement. 57 5.21.2.3.4 Measurement procedure . 57 5.21.3 Polite spectrum access timing parameters . 58 5.21.3.1 Reference limits for polite spectrum access timing parameters . 58 5.21.3.2 Conformance . 58 5.21.4 Adaptive Frequency Agility . 59 5.21.4.1 Description . 59 5.21.4.2 Conformance . 59 5.22 Bi-Directional Operation Verification . 59 5.22.1 Description . 59 5.22.2 Conformance. 59 Annex A (normative): Technical performance of the test equipment . 60 A.1 Spectrum analyser . 60 A.2 Signal Generators and Signal Sources . 60 Annex B (normative): Test Fixture . 61 B.0 Description of test-fixture . 61 B.1 Mode of use . 62 Annex C (normative): Test sites and arrangements for radiated measurement . 63 C.0 Introduction . 63 C.1 Radiation test sites . 63 C.1.1 Open Area Test Site (OATS) . 63 C.1.2 Semi Anechoic Room . 64 C.1.3 Fully Anechoic Room (FAR) . 65 C.1.4 Measurement Distance . 67 C.2 Antennas . 67 SIST EN 300 220-1 V3.1.1:2017

ETSI ETSI EN 300 220-1 V3.1.1 (2017-02) 7 C.2.0 General . 67 C.2.1 Measurement antenna . 67 C.2.2 Substitution antenna . 67 C.3 Guidance on the use of radiation test sites . 68 C.3.0 General . 68 C.3.1 Power supplies for the battery powered EUT . 68 C.3.2 Site preparation . 68 C.4 Coupling of signals . 69 C.4.1 General . 69 C.4.2 Data Signals. 69 C.5 Measurement procedures for radiated measurement . 69 C.5.0 General . 69 C.5.1 Radiated measurements in an OATS or SAR . 69 C.5.2 Radiated measurements in a FAR . 70 C.5.3 Substitution measurement . 70 C.5.4 Radiated measurement for receivers. 71 C.6 Guidance for testing technical requirements . 71 C.6.0 General . 71 C.6.1 Radio test suites and corresponding test sites . 71 Annex D (informative): Bibliography . 72 Annex E (informative): Change History . 73 History . 74
ETSI ETSI EN 300 220-1 V3.1.1 (2017-02) 8 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 1 of a multi-part deliverable covering Short Range Devices (SRD), as identified below: Part 1: "Technical characteristics and methods of measurement"; Part 2: "Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment"; Part 3-1: "Harmonised Standard covering the
...