ETSI EN 301 166-2 V1.1.1 (2001-12)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

REN/ERM-RP02-045-2

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Kopenske mobilne storitve - Tehnične karakteristike in preskuševalni pogoji za radijsko opremo za analogne oziroma digitalne komunikacije (prenos govora oziroma podatkov), ki deluje v ozkopasovnih kanalih in ima antenski konektor - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE

General Information

• Status: Published
• Publication Date: 06-Dec-2002
• Technical Committee: ERM RP02 - Land Mobile Radio A
• Current Stage: 12 - Completion
• Due Date: 12-Dec-2001
• Completion Date: 05-Dec-2001
• Mandate: M/284
• Ref Project: SIST EN 301 166-2 V1.1.1:2003 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

Relations

• Official Journal Project Relation: ETSI EN 301 166-2 V1.2.1 (2007-07) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
• Effective Date: 01-Dec-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 301 166-2 Version 1.1.1SIST EN 301 166-2 V1.1.1:2003en01-marec-2003SIST EN 301 166-2 V1.1.1:2003SLOVENSKI
STANDARD



SIST EN 301 166-2 V1.1.1:2003



ETSI EN 301 166-2 V1.1.1 (2001-12)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Land Mobile Service;Radio equipment for analogue and/or digitalcommunication (speech and/or data) and operating onnarrow band channels and having an antenna connector;Part 2: Harmonized EN covering essential requirementsunder article 3.2 of the R&TTE Directive SIST EN 301 166-2 V1.1.1:2003



ETSI ETSI EN 301 166-2 V1.1.1 (2001-12) 2
Reference REN/ERM-RP02-045-2 Keywords analogue, antenna, connector, data, digital, mobile, PMR, radio, regulation, speech ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [e-mail] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001. All rights reserved.
SIST EN 301 166-2 V1.1.1:2003



ETSI ETSI EN 301 166-2 V1.1.1 (2001-12) 3 Contents Intellectual Property Rights.5 Foreword.5 Introduction.6 1 Scope.8 2 References.8 3 Definitions, symbols and abbreviations.9 3.1 Definitions.9 3.2 Symbols.9 3.3 Abbreviations.9 4 Technical specifications.9 4.1 Environmental profile.10 4.2 Transmitter requirements.10 4.2.1 Frequency error.10 4.2.1.1 Definition.10 4.2.1.2 Limit.10 4.2.1.3 Method of measurement.10 4.2.2 Maximum power (PX) (conducted).10 4.2.2.1 Definition.10 4.2.2.2 Limit.10 4.2.2.3 Method of measurement.10 4.2.3 Maximum effective radiated power.10 4.2.3.1 Definition.10 4.2.3.2 Limit.10 4.2.3.3 Method of measurement.10 4.2.4 Adjacent channel power.11 4.2.4.1 Definition.11 4.2.4.2 Limit.11 4.2.4.3 Method of measurement.11 4.2.5 Spurious emissions.11 4.2.5.1 Definition.11 4.2.5.2 Limit.11 4.2.5.3 Method of measurement.11 4.2.6 Intermodulation attenuation.11 4.2.6.1 Definition.11 4.2.6.2 Limit.11 4.2.6.3 Method of measurement.11 4.2.7 Transient power.11 4.2.7.1 Definition.11 4.2.7.2 Limit.11 4.2.7.3 Method of measurement.11 4.3 Receiver requirements.12 4.3.1 Maximum usable sensitivity.12 4.3.1.1 Definition.12 4.3.1.2 Limit.12 4.3.1.3 Method of measurement.12 4.3.2 Co-channel rejection.12 4.3.2.1 Definition.12 4.3.2.2 Limit.12 4.3.2.3 Method of measurement.12 4.3.3 Adjacent channel selectivity.12 4.3.3.1 Definition.12 4.3.3.2 Limit.12 4.3.3.3 Method of measurement.12 SIST EN 301 166-2 V1.1.1:2003



ETSI ETSI EN 301 166-2 V1.1.1 (2001-12) 4 4.3.4 Spurious response rejection.13 4.3.4.1 Definition.13 4.3.4.2 Limit.13 4.3.4.3 Method of measurement.13 4.3.5 Intermodulation response rejection.13 4.3.5.1 Definition.13 4.3.5.2 Limit.13 4.3.5.3 Method of measurement.13 4.3.6 Blocking or desensitization.13 4.3.6.1 Definition.13 4.3.6.2 Limit.13 4.3.6.3 Method of measurement.13 4.3.7 Spurious radiations.13 4.3.7.1 Definition.13 4.3.7.2 Limit.14 4.3.7.3 Method of measurement.14 5 Testing for compliance with technical requirements.14 5.1 Environmental conditions for testing.14 5.1.1 Normal and extreme test-conditions.14 5.1.2 Test power source.14 5.1.3 Choice of samples for the measurements.14 5.2 Interpretation of the measurement results.14 5.3 Essential test suites.15 5.3.1 Frequency error.15 5.3.2 Maximum power (PX) (conducted).15 5.3.3 Maximum effective radiated power.15 5.3.4 Adjacent channel power.15 5.3.5 Spurious emissions.15 5.3.6 Intermodulation attenuation.15 5.3.7 Transient power.15 5.4 Other test suites.16 5.4.1 Maximum usable sensitivity.16 5.4.2 Co-channel rejection.16 5.4.3 Adjacent channel selectivity.16 5.4.4 Spurious response rejection.16 5.4.5 Intermodulation response rejection.16 5.4.6 Blocking or desensitization.16 5.4.7 Spurious radiations.16 Annex A (informative): Bibliography.17 History.18
SIST EN 301 166-2 V1.1.1:2003



ETSI ETSI EN 301 166-2 V1.1.1 (2001-12) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [13] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"[8]). The present document is part 2 of a multi-part deliverable covering Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector, as identified below: Part 1: "Technical characteristics and methods of measurements"; Part 2: "Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 23 November 2001 Date of latest announcement of this EN (doa): 28 February 2002 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 August 2002 Date of withdrawal of any conflicting National Standard (dow): 31 August 2003
SIST EN 301 166-2 V1.1.1:2003



ETSI ETSI EN 301 166-2 V1.1.1 (2001-12) 6 Introduction The present document is part of a set of standards designed to fit in a modular structure to cover all radio and telecommunications terminal equipment under the R&TTE Directive. Each standard is a module in the structure. The modular structure is shown in figure 1.
If needed, new standards for human exposure to Electromagnetic Fields, if needed, new standards for acoustic safety Use of spectrum * If needed Scoped by
equipment
class or type Scoped by frequency and/or equipment type Disability* Privacy* Fraud* No harm to the network* Emergency* Interworking via
the network* Interworking with the network Non-radio Radio (RE) Non-TTE TTE 3.1b 3.2 3.3c 3.3b 3.3a 3.3d 3.3e 3.3f Radio Product EMC EN 301 489 multi-part EMC standard Generic and product standards also notified under EMC Directive Standards also notified under LV Directive 3.1a New radio harmonized standards Spectrum EMC Safety
Figure 1: Modular structure for the various standards used under the R&TTE Directive SIST EN 301 166-2 V1.1.1:2003



ETSI ETSI EN 301 166-2 V1.1.1 (2001-12) 7 Explanation of figure 1 The left hand edge of figure 1 shows the different clauses of article 3 of the R&TTE Directive [8]. For article 3.3 various horiz
...