IEC TR 63482:2024/COR1:2024
(Corrigendum)Corrigendum 1 - Maintenance of low voltage switchgear and controlgear and their assemblies
Corrigendum 1 - Maintenance of low voltage switchgear and controlgear and their assemblies
General Information
Relations
Standards Content (Sample)
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
IEC TR 63482
Edition 1.0 2024-07
MAINTENANCE OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR AND THEIR ASSEMBLIES
CO RRI G E NDUM 1
In Annex B, in the
...
This May Also Interest You
IEC 62683-2:2024 specifies the functional safety and reliability data model descriptions for low‑voltage switchgear and controlgear to be used by engineering tools for the design of safety related control systems according to IEC 62061, IEC 61508-2 and ISO 13849-1, and for dependability analysis of electrotechnical systems.
This dictionary is used to facilitate the exchange between computers of data characterizing low-voltage switchgear and controlgear.
Each property has an unambiguously defined meaning and naming, and where relevant, a defined value list, a defined format and a defined unit.
The data models described in this document are intended to complement the product catalogue data defined by IEC 62683-1.
This document does not cover:
- exchange format such as defined in VDMA 66413,
- explosive atmosphere applications,
- manufacturer specific features.
- Standard35 pagesEnglish and French languagesale 15% off
IEC TR 63482:2024 provides guidance for the specification and selection of the appropriate approach and for the planning and the execution of the maintenance of low-voltage switchgear and controlgear and their assemblies having a rated voltage up to and including 1 000 V AC or 1 500 V DC, and designed for a nominal frequency of the incoming supply or supplies not exceeding 1 000 Hz.
The content of the corrigendum 1 (2024-11) has been included in this copy.
- Technical report26 pagesEnglish languagesale 15% off
IEC 63404:2024 defines radiocommunication related requirements for equipment intended to integrate a radiocommunication device. It includes the initial integration and update of a the radiocommunication device, having a carrier frequency greater than 380 MHz, into new or updated host equipment with:
- The classification of integration categories;
- The EMC immunity verification using a capability profile approach;
- The verification of the unwanted emission level of the radio transceiver.
- Standard71 pagesEnglish and French languagesale 15% off
IEC TS 63058:2021 provides guidance to manufacturers of low-voltage switchgear and controlgear and their assemblies in evaluating and improving the environmental impact of their products, and in enabling effective communication using common references for environmental information throughout the supply chain.
- Technical specification112 pagesEnglish and French languagesale 15% off
IEC TR 63196:2020 is following the principles of IEC Guide 119. This document defines the energy efficiency aspects of switchgear and controlgear products complying with IEC 60947 (all parts), IEC 61095 and IEC 62626 (all parts), and associated assemblies complying with IEC 61439 (all parts), in the context of the overall system energy efficiency. This document references energy policy aspects, as well as product and system aspects.
- Technical report22 pagesEnglish languagesale 15% off
IEC 62683-2:2024 specifies the functional safety and reliability data model descriptions for low‑voltage switchgear and controlgear to be used by engineering tools for the design of safety related control systems according to IEC 62061, IEC 61508-2 and ISO 13849-1, and for dependability analysis of electrotechnical systems.
This dictionary is used to facilitate the exchange between computers of data characterizing low-voltage switchgear and controlgear.
Each property has an unambiguously defined meaning and naming, and where relevant, a defined value list, a defined format and a defined unit.
The data models described in this document are intended to complement the product catalogue data defined by IEC 62683-1.
This document does not cover:
- exchange format such as defined in VDMA 66413,
- explosive atmosphere applications,
- manufacturer specific features.
- Standard35 pagesEnglish and French languagesale 15% off
- Standard32 pagesEnglish and French languagesale 15% off
IEC 60947-4-2:2020 applies to semiconductor motor controllers, starters and soft-starters which can include a series mechanical switching device, intended to be connected to circuits the rated voltage of which does not exceed 1 000 V AC.
This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- scope exclusions;
- editorial correction of notes and hanging paragraphs;
- reference to IEC 62683-1;
- safety aspects related to:
- general aspects;
- limited energy circuits;
- electronic circuits;
- mention of dedicated wiring accessories;
- power consumption measurement;
- alignment to IEC 60947-1:2020.
- Standard228 pagesEnglish languagesale 15% off
- Standard230 pagesEnglish and French languagesale 15% off
IEC 60947-2:2024 applies to circuit-breakers, intended to be installed and operated by instructed or skilled persons, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V AC or 1 500 V DC; it also contains additional requirements for integrally fused circuit-breakers.
This document also applies to circuit-breakers with ratings at or below 1 000 V AC, additionally having one or more ratings above 1 000 V AC but not exceeding 1 500 V AC.
This sixth edition cancels and replaces the fifth edition published in 2016 and its Amendment 1: 2019. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) suitability for isolation (see Clause 1);
b) removal of the classification according to the interrupting medium, according to the design, according to the suitability for isolation (see Clause 4);
c) adjustment of current settings with an external device connectable to the release (see 5.7.3);
d) requirements for circuits with protective separation (see 8.2.3.8);
e) additional tests for ground-fault overcurrent releases (see 9.3.4.2.5);
f) additional tests concerning dielectric properties in tripped position (see 9.3.4.3);
g) use of DC voltage for dielectric tests (see 9.3.4.6.2 and 9.4.6);
h) tests of individual pole breaking capacity under phase-to-neutral AC voltage (see 9.3.11);
i) improvement of measurement of power loss in Annex G;
j) changes in EMC tests (see Annex J);
k) introduction of CBI class W in Annex L.
- Standard565 pagesEnglish and French languagesale 15% off
IEC TR 63482:2024 provides guidance for the specification and selection of the appropriate approach and for the planning and the execution of the maintenance of low-voltage switchgear and controlgear and their assemblies having a rated voltage up to and including 1 000 V AC or 1 500 V DC, and designed for a nominal frequency of the incoming supply or supplies not exceeding 1 000 Hz.
The content of the corrigendum 1 (2024-11) has been included in this copy.
- Technical report26 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.