IEC 60745-2-13:2006+AMD1:2009 CSV

Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws

IEC 60745-2-13:2006+A1:2009 Applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. Does not apply to chain saws for tree service as defined in ISO 11681-2, pole cutters and pruners.
This publication is to be read in conjunction with  IEC 60745-1:2006.
This consolidated version consists of the second edition (2006) and its amendment 1 (2009). Therefore, no need to order amendment in addition to this publication.

Outils électroportatifs à moteur - Sécurité - Partie 2-13: Règles particulières pour les scies à chaîne

La CEI 60745-2-13:2006+A1:2009 S'applique aux scies à chaîne destinées à couper du bois et conçues pour être utilisées par une seule personne. Cette norme ne s'applique pas aux scies à chaîne conçues pour être utilisées conjointement avec un guide-chaîne et un couteau diviseur ou de toute autre manière telle qu'avec un support ou comme une machine fixe ou transportable. Ne s'applique pas aux scies à chaîne pour l'élagage des arbres comme défini dans l'ISO 11681-2, les scies à perche et les perches élagueuses.
Cette publication doit être lue conjointement avec la  CEI 60745-1:2006.
Cette version consolidée comprend la deuxième édition (2006) et son amendement 1 (2009). Il n'est donc pas nécessaire de commander l'amendement avec cette publication.

General Information

• Status: Published
• Publication Date: 13-Apr-2011
• ICS: 25.140.20 - Electric tools
• ICS: 65.060.80 - Forestry equipment
• Technical Committee: TC 116 - Safety of motor-operated electric tools
• Current Stage: PPUB - Publication issued
• Start Date: 14-Apr-2011
• Completion Date: 14-Apr-2011

Standards Content (Sample)

60745-2-13 ®
Edition 2.1 2011-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Hand-held motor-operated electric tools – Safety –
Part 2-13: Particular requirements for chain saws

Outils électroportatifs à moteur – Sécurité –
Partie 2-13: Règles particulières pour les scies à chaîne

IEC 60745-2-13:2006+A1:2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
 Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
 Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
 Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
 Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
60745-2-13 ®
Edition 2.1 2011-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Hand-held motor-operated electric tools – Safety –
Part 2-13: Particular requirements for chain saws

Outils électroportatifs à moteur – Sécurité –
Partie 2-13: Règles particulières pour les scies à chaîne

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX CL
ICS 25.140.20; 65.060.80 ISBN 978-2-88912-419-0

– 2 – 60745-2-13  IEC:2006+A1:2009
CONTENTS
FOREWORD . 4
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirements . 9
5 General conditions for the tests . 9
6 Void. 9
7 Classification . 9
8 Marking and instructions . 10
9 Protection against access to live parts . 12
10 Starting . 12
11 Input and current . 12
12 Heating . 13
13 Leakage current . 13
14 Moisture resistance . 13
15 Electric strength . 13
16 Overload protection of transformers and associated circuits . 13
17 Endurance . 13
18 Abnormal operation . 13
19 Mechanical hazards . 13
20 Mechanical strength . 17
21 Construction . 17
22 Internal wiring . 19
23 Components . 19
24 Supply connection and external flexible cords . 19
25 Terminals for external conductors . 19
26 Provision for earthing . 19
27 Screws and connections . 19
28 Creepage distances, clearances and distances through insulation . 19
29 Resistance to heat, fire and tracking . 19
30 Resistance to rusting . 19
31 Radiation, toxicity and similar hazards . 19

Annexes . 26
Annex K (normative) Battery tools and battery packs . 26
Annex L (normative) Battery tools and battery packs provided with mains connection

or non-isolated sources. 27
Annex AA (normative) Symbols for safety recommendations and warnings . 28
Annex BB (informative) Instructions concerning the proper techniques for basic felling,
limbing, and cross-cutting . 29

60745-2-13  IEC:2006+A1:2009 – 3 –
Bibliography . 34

Figure 101 – Chain saw nomenclature . 20
Figure 102 – Cutting length . 21
Figure 103 – Holding the chain saw . 21
Figure 104 – Minimum rear hand guard dimensions . 22
Figure 105 – Straight test probe . 22
Figure 106 – Chain brake test . 23
Figure 107 – Static test for release force . 24
Figure 108 – Bar tip guard . 24
Figure 109 – Handle gripping area . 25
Figure 110 – Impact text fixture for handle insulation . 25
Figure BB.101 – Description of felling: escape routes . 31
Figure BB.102 – Description of felling: undercutting . 31
Figure BB.103 – Tree limbing. 32
Figure BB.104 – Log supported along the entire length . 32
Figure BB.105 – Log supported one end . 32
Figure BB.106 – Log supported both ends . 33
Figure BB.107 – Bucking a log . 33

– 4 – 60745-2-13  IEC:2006+A1:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS –
SAFETY–
Part 2-13: Particular requirements for chain saws

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
...