IEC 60745-2-13:2006/AMD1:2009
(Amendment)Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
Amendement 1 - Outils électroportatifs à moteur - Sécurité - Partie 2-13: Règles particulières pour les scies à chaîne
General Information
Relations
Standards Content (Sample)
IEC 60745-2-13 ®
Edition 2.0 2009-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Hand-held motor-operated electric tools – Safety –
Part 2-13: Particular requirements for chain saws
Outils électroportatifs à moteur – Sécurité –
Partie 2-13: Règles particulières pour les scies à chaîne
IEC 60745-2-13:2006/A1:2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60745-2-13 ®
Edition 2.0 2009-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Hand-held motor-operated electric tools – Safety –
Part 2-13: Particular requirements for chain saws
Outils électroportatifs à moteur – Sécurité –
Partie 2-13: Règles particulières pour les scies à chaîne
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS 25.140.20; 65.060.80 ISBN 978-2-88910-270-9
– 2 – 60745-2-13 Amend. 1 © IEC:2009
FOREWORD
This amendment has been prepared by IEC committee 116: Safety of hand-held motor-
operated electric tools, formerly subcommittee 61F of IEC committee 61: Safety of household
and similar electrical appliances.
The text of this amendment is based on the following documents:
FDIS Report on voting
116/17/FDIS 116/18/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
This amendment modifies the present part 2-13 to ensure its conformity with the fourth edition
(2006) of IEC 60745-1, Hand-held motor-operated electric tools – Safety – Part 1: General
requirements
The committee has decided that the contents of the base publication and its amendments will
remain unchanged until the maintenance result date indicated on the IEC web site under
“http://webstore.iec.ch” in the data related to the specific publication. At this date, the
publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
_____________
60745-2-13 Amend. 1 © IEC:2009 – 3 –
8 Marking and instructions
Replace the existing text of 8.1 by the following:
8.1 Addition:
Chain saws shall be marked with the following:
– maximum length of the guide bar in mm;
– identification of the direction of rotation of the saw chain by a legible and durable mark.
In addition, chain saws shall be marked with safety recommendations and warnings of the
following substance which shall be written in one of the official languages of the country in
which the tool is to be sold:
– “Wear eye protection” or the sign M004 of ISO 7010 or the sign specified in Annex AA;
– “Wear ear protection” or the sign M003 of ISO 7010 or the sign specified in Annex AA.
A combination of symbols, such as eye, ear and head protection, is allowed.
For chain saws with a degree of protection of less than IPX4:
– “Do not expose to rain” or the symbol specified in Annex AA.
For mains supplied tools:
– “Remove plug from the mains immediately if the cable is damaged or cut” or the symbol
specified in Annex AA.
If other symbols are used, they shall be in accordance with ISO 3864-3.
Remove the two footnotes to 8.1.
8.12.1.1 Addition:
nd
Add the following text after the 2 warning of 8.12.1.1:
• Hold the power tool by insulated gripping surfaces only, because the saw chain may
contact hidden wiring or its own cord. Saw chains contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric shock.
21 Construction
Delete Subclauses 21.31 and 21.32.
– 4 – 60745-2-13 Amend. 1 © IEC:2009
Annex K – Battery tools and batte
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.