iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61675-1:1998/AMD1:2008

(Amendment)

Amendment 1 - Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs

Amendment 1 - Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs

General Information

Status
Published
Publication Date
08-Apr-2008
ICS
11.040.50 - Radiographic equipment
Technical Committee
SC 62C - Equipment for radiotherapy, nuclear medicine and radiation dosimetry
Drafting Committee
WG 2 - TC 62/SC 62C/WG 2
Current Stage
DELPUB - Deleted Publication
Completion Date
25-Sep-2013
Ref Project

Relations

Amends
IEC 61675-1:1998 - Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs
Effective Date
05-Sep-2023
Revised
IEC 61675-1:2013 - Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs
Effective Date
05-Sep-2023

Buy Standard

IEC 61675-1:1998/AMD1:2008 - Amendment 1 - Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs Released:4/9/2008 Isbn:2831897114IEC 61675-1:1998/AMD1:2008 - Amendment 1 - Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs Released:4/9/2008 Isbn:2831897114
PreviousNext
Standard
IEC 61675-1:1998/AMD1:2008 - Amendment 1 - Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs Released:4/9/2008 Isbn:2831897114
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61675-1
Edition 1.0 2008-04
INTERNATIONAL
STANDARD
AMENDMENT 1
Radionuclide imaging devices – Characteristics and test conditions –
Part 1: Positron emission tomographs

IEC 61675-1 A1:2008(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61675-1
Edition 1.0 2008-04
INTERNATIONAL
STANDARD
AMENDMENT 1
Radionuclide imaging devices – Characteristics and test conditions –
Part 1: Positron emission tomographs

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
D
ICS 11.040.50 ISBN 2-8318-9711-4

– 2 – 61675-1 Amend. 1 © IEC:2008(E)
FOREWORD
This amendment has been prepared by subcommittee 62C: Equipment for radiotherapy,
nuclear medicine and radiation dosimetry, of IEC technical committee 62: Electrical
equipment in medical practice.
The text of this amendment is based on the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 61674:2024(Main)
Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging

IEC 61674:2024 specifies the performance and some related constructional requirements of DIAGNOSTIC DOSIMETERS intended for the measurement of AIR KERMA, AIR KERMA LENGTH PRODUCT or AIR KERMA RATE, in photon radiation fields used in medical X-ray imaging, such as RADIOGRAPHY, RADIOSCOPY and COMPUTED TOMOGRAPHY (CT), for X-RADIATION with generating potentials in the range of 20 kV to 150 kV. This document is applicable to the performance of DOSIMETERS with VENTED IONIZATION CHAMBERS and/or SEMICONDUCTOR DETECTORS as used in X-ray diagnostic imaging.
IEC 61674:2024 cancels and replaces the second edition published in 2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) for mammography, the manufacturer specifies the REFERENCE VALUE for the RADIATION QUALITY;
b) for mammography, the manufacturer provides the MINIMUM RATED RANGE of RADIATION QUALITIES for the compliance test on energy dependence of response;
c) the compliance test for analogue displays was removed;
d) the compliance tests for range reset, the effect of leakage and recombination losses were removed. These tests are already covered by the test on linearity and cannot be conducted for modern devices. The estimation of COMBINED STANDARD UNCERTAINTY was changed accordingly;
e) the compliance test for mains rechargeable and battery-operated dosimeters were updated for modern devices

  • Standard
    116 pages
    English language
    sale 15% off
  • Standard
    75 pages
    English and French language
    sale 15% off
IEC
IEC 61676:2023/COR1:2024(Corrigendum)
Corrigendum 1 - Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
  • Standard
    1 page
    English and French language
    sale 15% off
IEC
IEC 61676:2023(Main)
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology

IEC 61676:2023 is available as IEC 61676:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61676:2023 specifies the performance requirements of instruments as used in the non-invasive measurement of X-RAY tube voltage up to 150 kV and the relevant compliance tests. This document also describes the method for calibration and gives guidance for estimating the uncertainty in measurements performed under conditions different from those during calibration. Applications for such measurement are found in diagnostic radiology including mammography, computed tomography (CT), dental radiology and radioscopy. This document is not concerned with the safety aspect of such instruments. The requirements for electrical safety applying to them are contained in IEC 61010-1. IEC 61676:2023 cancels and replaces first edition published in 2002, Amendment 1:2008. This edition constitutes a technical revision. It includes an assessment of the combined standard uncertainty for the performance of a hypothetical instrument for the non-invasive measurement of the tube high voltage (in Annex A) which replaces Annex A of the edition 1.1 titled "Recommended performance criteria for the invasive divider".
The contents of the corrigendum of January 2024 have been included in this copy.

  • Standard
    104 pages
    English language
    sale 15% off
  • Standard
    67 pages
    English and French language
    sale 15% off
IEC
IEC 61675-1:2022(Main)
Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs

IEC 61675-1:2022 is available as IEC 61675-1:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61675-1:2022 specifies terminology and test methods for declaring the characteristics of POSITRON EMISSION TOMOGRAPHS. POSITRON EMISSION TOMOGRAPHS detect the ANNIHILATION RADIATION of positron emitting RADIONUCLIDES by COINCIDENCE DETECTION. IEC 61675-1:2022 cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: requirements have been changed or newly created regarding the technical aspects of SPATIAL RESOLUTION, sensitivity measurement, SCATTER FRACTION, COUNT RATE performance, image quality, PET/CT registration accuracy and time-of-flight resolution.

  • Standard
    136 pages
    English language
    sale 15% off
  • Standard
    87 pages
    English and French language
    sale 15% off
IEC
IEC 63073-1:2020(Main)
Dedicated radionuclide imaging devices - Characteristics and test conditions - Part 1: Cardiac SPECT

IEC 63073-1:2020 specifies terminology and test methods for describing the characteristics of SINGLE PHOTON EMISSION COMPUTED TOMOGRAPHY (SPECT) systems designed specifically for tomographic cardiac imaging. This includes dedicated systems or general purpose systems with dedicated sub-systems which are not included in the scope of IEC 61675-2.

  • Standard
    58 pages
    English and French language
    sale 15% off
IEC
IEC 60580:2019(Main)
Medical electrical equipment - Dose area product meters

IEC 60580:2019 is available as IEC 60580:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60580:2019 specifies the performance and testing of Dose Area Product Meters intended to measure Dose Area Product and/or Dose Area Product Rate to which the Patient is exposed during Medical Radiological Examinations. This document is applicable to the following types of Dose Area Product Meters:
a) Field-Class Dose Area Product Meters normally used for the measurement of Dose Area Products during Medical Radiological Examinations;
b) Reference-Class Dose Area Product Meters normally used for the Calibration of Field-Class Dosimeters.
NOTE Reference-Class Dose Area Product Meters can be used as Field-Class Dose Area Product Meters.
The object of this document is
1) to establish requirements for a satisfactory level of performance for Dose Area Product Meters, and
2) to standardize the methods for the determination of compliance with this level of performance.
Two levels of performance are specified:
– a lower level of performance applying to Field-Class Dose Area Product Meters;
– a higher level of performance applying to Reference-Class Dose Area Product Meters.
IEC 60580:2019 cancels and replaces the second edition published 2000, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) a second class of devices is introduced with tighter uncertainty tolerances;
b) this document has been expanded to include detectors other than ionization chambers;
c) radiation qualities have been updated to the new definitions according to IEC 61267;
d) a requirement on the linearity of the dose area product rate measurement was added;
e) changed chamber light transmission requirement from 70 % to 60 %.

  • Standard
    107 pages
    English language
    sale 15% off
  • Standard
    69 pages
    English and French language
    sale 15% off
IEC
IEC TR 61948-2:2019(Main)
Nuclear medicine instrumentation - Routine tests - Part 2: Scintillation cameras and single photon emission computed tomography imaging

IEC TR 61948-2:2019 is valid for single photon scintillation cameras with parallel hole collimators used in planar scintigraphy and tomography. It is also valid for the SPECT portion of SPECT/CT systems with parallel hole collimators, including the co-registration between the SPECT and CT subsystems. The objective is to specify ROUTINE TESTS for QUALITY CONTROL. Methods for the ACCEPTANCE TEST are described in IEC 61675-2.
IEC TR 61948-2:2019 cancels and replaces the first edition published in 2001. It constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) adaptation to apply to the present technology;
b) updating of the test methods to comply with the recent state of the art.

  • Technical report
    15 pages
    English language
    sale 15% off
IEC
IEC TR 62926:2019(Main)
Medical electrical system - Guidelines for safe integration and operation of adaptive external-beam radiotherapy systems for real-time adaptive radiotherapy

IEC TR 62926:2019 provides guidelines for safe integration and operation of an adaptive external-beam RADIOTHERAPY system (AEBRS) for intra-fractionally moving rigid TARGET VOLUMEs, where required equipment can be sourced from one or several MANUFACTURERs. In particular it addresses guidelines to help ensure safe integration and operation for the PATIENT, OPERATOR, other persons and sensitive devices in the vicinity. In this document, the word “system” is hereafter used to refer to an AEBRS.
This document specifies the safety guidelines for a MANUFACTURER or RESPONSIBLE ORGANIZATION who integrates the AEBRS for intra-fractionally moving rigid TARGET VOLUMEs. If a RESPONSIBLE ORGANIZATION integrates an AEBRS, then it takes the role of MANUFACTURER and will be referred to as a MANUFACTURER throughout this document.
This document includes reference models of the AEBRS for intra-fractionally moving rigid TARGET VOLUMEs and HAZARDs which, at a minimum, are considered during the RISK ANALYSIS.
Although TARGET VOLUMES and OARs can deform during motion, adaptations in response to deformations of the TARGET VOLUME are out of the scope of this document. The scope is limited to rigid TARGET VOLUMEs exhibiting intra-fractional movements, both translational and rotational. While technical HAZARDs are discussed in this document, the RESPONSIBLE ORGANIZATION is reminded that clinical judgement is always employed when determining clinical usability and reviewing TREATMENT PARAMETER changes.
This document does not specifically address HAZARD mitigations for each of the HAZARDs mentioned in the document; however, some mitigations are given as examples in Clauses 4 and 5. All guidelines in this document are intended to be implemented in accordance with the general standard IEC 60601-1:2005 and IEC 60601-1:2005/AMD1:2012, with special attention to 4.2 of IEC 60601-1:2005 and IEC 60601-1:2005/AMD1:2012.

  • Technical report
    47 pages
    English language
    sale 15% off
IEC
IEC TR 61948-4:2019(Main)
Nuclear medicine instrumentation - Routine tests - Part 4: Radionuclide calibrators

IEC TR 61948-4:2019 is available as IEC TR 61948-4:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC TR 61948-4:2019 covers the routine testing of radionuclide calibrators used in nuclear medicine. Such devices utilise ionisation chambers of the well type and a direct readout in units of activity. Requirements and specific methods to determine performance parameters are described in IEC 61303. These methods are primarily designed for acceptance testing. IEC TR 61948-4:2019 cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: the test method to determine system linearity has been updated to reflect the technical developments of radionuclide calibrators.

  • Technical report
    10 pages
    English language
    sale 15% off
  • Technical report
    21 pages
    English language
    sale 15% off
IEC
IEC TR 61948-3:2018(Main)
Nuclear medicine instrumentation - Routine tests - Part 3: Positron emission tomographs

IEC TR 61948-3:2018(E) describes test methods for Positron Emission Tomographs (PET). As part of quality control, this document is defining routine tests to be performed by the user of Positron Emission Tomographs to maintain proper operation conditions. The results of these routine tests are compared to the reference data determined during or after acceptance test. Methods used for acceptance tests are described in IEC 61675-1:2013.
In addition, today a Positron Emission Tomograph often includes X-Ray equipment for Computed Tomography (CT). For this document, PET/CT hybrid devices are considered to be state of the art, dedicated Positron Emission Tomographs not including the X-ray component being special cases only.
quality control tests specific to only the CT component of the PET/CT are described in IEC 61223-2-6. The CT scanner also is subject to a type test according to IEC 60601-1 and applicable collateral and particular standards.
This second edition cancels and replaces the first edition published in 2005. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) a clause to check routine performance tests has been added,
b) a test to check the accuracy of co-registration of PET and CT images has been added,
c) a test to check image quality has been added,
d) the test to check pixel size has been removed.

  • Technical report
    11 pages
    English language
    sale 15% off