Amendment 2 - Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures

Amendement 2 - Appareils électromédicaux - Partie 2-43: Exigences particulières pour la sécurité de base et les performances essentielles des appareils à rayonnement X lors d'interventions

General Information

Status
Published
Publication Date
15-Oct-2019
Current Stage
DELPUB - Deleted Publication
Completion Date
05-Dec-2022
Ref Project

Relations

Buy Standard

Standard
IEC 60601-2-43:2010/AMD2:2019 - Amendment 2 - Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
English and French language
33 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60601-2-43 ®
Edition 2.0 2019-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 2
AM ENDEMENT 2
Medical electrical equipment –
Part 2-43: Particular requirements for the basic safety and essential performance
of X-ray equipment for interventional procedures

Appareils électromédicaux –
Partie 2-43: Exigences particulières pour la sécurité de base et les performances
essentielles des appareils à rayonnement X lors d’interventions

IEC 60601-2-43:2010-03/AMD2:2019-10(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60601-2-43 ®
Edition 2.0 2019-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 2
AM ENDEMENT 2
Medical electrical equipment –

Part 2-43: Particular requirements for the basic safety and essential

performance of X-ray equipment for interventional procedures

Appareils électromédicaux –
Partie 2-43: Exigences particulières pour la sécurité de base et les

performances essentielles des appareils à rayonnement X lors d’interventions

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 11.040.50 ISBN 978-2-8322-7349-4

– 2 – IEC 60601-2-43:2010/AMD2:2019
 IEC 2019
FOREWORD
This amendment has been prepared by subcommittee 62B: Diagnostic imaging equipment, of
IEC technical committee 62: Electrical equipment in medical practice.
The text of this amendment is based on the following documents:
FDIS Report on voting
62B/1137/FDIS 62B/1146/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
___________
INTRODUCTION to Amendment 2
The purpose of this second amendment to IEC 60601-2-43:2010 is to introduce changes as
follows:
– scope clarification with regards to MOBILE X-ray equipment and applicability of
IEC 60601-2-54 subclauses;
– reference to IEC 60601-2-54:2009/AMD2:2018 for common subclauses;
– alignment of 201.7.9.1 with IEC 60601-2-54:2009/AMD2:2018 – 201.7.9.1 is no longer
modified;
– inclusion of adapted requirements or recommendations from
IEC 60601-2-54:2009/AMD2:2018 for
• management of radioscopy image storage in 203.6.1.101,
• display of last image hold (LIH RADIOGRAM) in 203.6.7.101, and
• graphical indication of the boundaries of the X-RAY FIELD in 203.8.102.2;
– inclusion of a recommendation for protection of gantry enclosures in 201.11.6.5.103;
– inclusion of a requirement for X-RADIATION pulse repetition frequency during radioscopy
in 203.6.3.103;
 IEC 2019
– inclusion of a recommendation for a DOSE MAP in 203.6.4.5 with additional definitions
in 201.3;
– inclusion of a requirement for display unit of dose area product in 203.6.4.5;
– addition of a number of technical clarifications.
__________
201.1.1 Scope
Replace the first sentence of the first existing paragraph by the following new sentence:
This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of both
FIXED and MOBILE X-RAY EQUIPMENT declared by the MANUFACTURER to be suitable for
RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES, hereafter referred to as
INTERVENTIONAL X-RAY EQUIPMENT.
Replace the third existing note, including the footnote, by the following new note and footnote:
NOTE 3 INTERVENTIONAL X-RAY EQUIPMENT, when used for cone-beam CT mode, is covered by this standard and
not by IEC 60601-2-44 [2] . No additional requirements for operation in cone-beam CT mode were identified for this
standard (see also Note 4 in 203.6.4.5).
__________
2) Figures in square brackets refer to the Bibliography.
Add, after the fourth existing note, the following new paragraph:
The subclauses of this standard supersede IEC 60601-2-54 subclauses. IEC 60601-2-54
applies only with regards to the cited subclauses; non-cited subclauses of IEC 60601-2-54 do
not apply.
201.1.3 Collateral standards
Replace, in the second existing paragraph, the second sentence, including its corresponding
footnotes, modified by IEC 60601-2-43:2010/AMD1:2017, by the following new sentence and
footnotes:
6 7 8 9 10
IEC 60601-1-8 , IEC 60601-1-9 , IEC 60601-1-10 , IEC 60601-1-11 , IEC 60601-1-12 do
not apply.
__________
6 IEC 60601-1-8, Medical electrical equipment – Part 1-8: General requirements for basic safety and essential
performance – Collateral Standard: General requirements, tests and guidance for alarm systems in medical
electrical equipment and medical electrical systems
7 IEC 60601-1-9, Medical electrical equipment – Part 1-9: General requirements for basic safety and essential
performance – Collateral Standard: Requirements for environmentally conscious design
8 IEC 60601-1-10, Medical electrical equipment – Part 1-10: General requirements for basic safety and essential
performance – Collateral Standard: Requirements for the development of physiologic closed-loop controllers
9 IEC 60601-1-11, Medical electrical equipment – Part 1-11: General requirements for basic safety and essential
performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical
systems used in the home healthcare environment
10 IEC 60601-1-12, Medical electrical equipment – Part 1-12: General requirements for basic safety and essential
performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical
systems intended for use in the emergency medical services environment

– 4 – IEC 60601-2-43:2010/AMD2:2019
 IEC 2019
201.2 Normative references
Add, immediately after the instruction "Amendment", the following new reference:
IEC 60529:1989, Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989/AMD1:1999
IEC 60529:1989/AMD2:2013
Replace, under "Addition", the existing reference to IEC 60580 and the one to
IEC 60601-2-54, modified by IEC 60601-2-43:2010/AMD1:2017, by the following new
references:
IEC 60580:2000, Medical electrical equipment – Dose area product meters
IEC 60601-2-54:2009, Medical electrical equipment – Part 2-54: Particular requirements for
the basic safety and essential performance of X-ray equipment for radiography and
radioscopy
IEC 60601-2-54:2009/AMD1:2015
IEC 60601-2-54:2009/AMD2:2018
201.3 Terms and definitions
Replace the first existing paragraph, modified by IEC 60601-2-43:2010/AMD1:2017, by the
following new paragraph:
For the purposes of this document, the terms and definitions given in IEC 60601-1:2005 and
IEC 60601-1:2005/AMD1:2012, IEC 60601-1-3:2008 and IEC 60601-1-3/AMD1:2013,
IEC 60601-2-54:2009, IEC 60601-2-54:2009/AMD1:2015 and IEC 60601-2-
54:2009/AMD2:2018, IEC TR 60788:2004, IEC 61910-1:2014, IEC 62220-1-1:2015 and the
following apply.
Add, after the existing definition 201.3.204, added by IEC 60601-2-43:2010/AMD1:2017, the
following new terms and definitions:
201.3.205
DOSE MAP
representation of the spatial distribution of a RADIATION dose quantity
201.3.206
SKIN DOSE
estimated ABSORBED DOSE to the skin at a specific point
201.3.207
SKIN DOSE MAP
DOSE MAP of the SKIN DOSE
201.4.102 RADIATION dose documentation
Add, at the end of the paragraph, modified by IEC 60601-2-43:2010/AMD1:2017, but before
the compliance statement, the following new paragraph:
The data elements shall be populated with the specified data.
Replace the existing compliance statement by the following new compliance statement:
Compliance is checked by appropriate inspection and functional test.

 IEC 2019
201.5 General requirements for testing of ME EQUIPMENT
Replace the existing text by the following new text:
Clause 5 of the general standard applies, except as follows:
201.5.7 Humidity preconditioning treatment
Addition:
For INTERVENTIONAL X-RAY EQUIPMENT that is to be used only in controlled environments, as
specified in the ACCOMPANYING DOCUMENTS, no humidity preconditioning treatment is required.
The ACCOMPANYING DOCUMENTS shall include the time period that the room environmental
operating conditions need to be maintained prior to powering the system on.
Compliance is checked by inspection of the ACCOMPANYING DOCUMENTS.
201.7.2.104 Marking of compliance
Replace, in the second existing paragraph, the reference "IEC 60601-2-43:2010" by
"IEC 60601-2-43:2010, IEC 60601-2-43:2010/AMD1:2017, IEC 60601-2-43:2010/AMD2:2019".
201.7.2.105 Protection against ingress of liquids
Replace, in the existing paragraph, the reference "IEC 60529" by "IEC 60529:1989,
IEC 60529:1989/AMD1:1999 and IEC 60529:1989/AMD2:2013".
201.7.9.1 General
Replace the existing text by the following new text:
Subclause 201.7.9.1 of IEC 60601-2-54:2009 and IEC 60601-2-54:2009/AMD2:2018 applies.
201.7.9.101 Additional
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.