IEC 61360-1:2002/AMD1:2003

Amendment 1 - Standard data element types with associated classification scheme for electric components - Part 1: Definitions - Principles and methods

General Information

• Status: Published
• Publication Date: 18-Dec-2003
• ICS: 31.020 - Electronic components in general
• Technical Committee: SC 3D - Classes, Properties and Identification of products - Common Data Dictionary (CDD)
• Drafting Committee: WG 2 - TC 3/SC 3D/WG 2
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 30-Jul-2009

Relations

• Amends: IEC 61360-1:2002 - Standard data element types with associated classification scheme for electric components - Part 1: Definitions - Principles and methods
• Effective Date: 05-Sep-2023
• Revised: IEC 61360-1:2009 - Standard data elements types with associated classification scheme for electric items - Part 1: Definitions - Principles and methods
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD
61360-1
2002-02
AMENDMENT 1
2003-12
Amendment 1
Standard data element types with associated
classification scheme for electric components –
Part 1:
Definitions – Principles and methods

 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale M
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 61360-1 Amend. 1  IEC:2003(E)

FOREWORD
This amendment has been prepared by subcommittee 3D: Data sets for libraries, of IEC

technical committee 3: Information structures, documentation and graphical symbols.

The text of this amendment is based on the following documents:

FDIS Report on voting
3D/120/FDIS 3D/127/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of the base publication and its amendments will
remain unchanged until 2005. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
_____________
Page 6
1.1 Scope and object
Delete, in the second paragraph, the final sentence:
Provision is also made for definition of the terms used in classification.
Page 7
1.3 Normative references
Insert the following normative reference:
IEC 60191-4:1999, Mechanical standardization of semiconductor devices – Part 4: Coding
system and classification into forms of package outlines for semiconductor device packages

61360-1 Amend. 1  IEC:2003(E) – 3 –

Page 8
2 Definitions
Delete, on page 9, definition 2.15 and renumber the remaining definitions accordingly.

Add the following new definitions:

2.21
shape
external form of a component package as given by the set of data element types
2.22
outline style
physical information enclosing the apparently plane figure presented by any object to sight,
contour and/or external boundary of a component
2.23
package
term applied to an electric or electromechanical component which covers the physical outline
of the component, including terminals and any protective material or casing
2.24
drawing
a drawing illustrates the meaning of a group of data element types describing the geometrical
characteristics of a component
Page 13
3.2.2 Version number
Replace the existing list in the “Comments section” with the following new list:
– preferred name – short name
– preferred letter symbol – preferred name of condition
– component class – data element type
(see super/subclass
– value code
as described in figure 10)
– reference class identifier
– value meaning – note
3.2.3 Revision number
Replace the existing list in the “Comments” section with the following new list and sentence:
– synonymous name – source document of DET definition
– synonymous letter symbol – source document of value list
– remark – spelling error in the text of the definition
– data element type class – figure
–formula
The revision number shall be reset to the starting number 01 when the version number is
changed.
– 4 – 61360-1 Amend. 1  IEC:2003(E)

Page 18
3.3.6 Source document of data element type definition

Add the following sentence to the third paragraph concerning Comments:

The value of this attribute shall have a maximum length of 80 characters

Page 19
Figure 5 – Attributes of the value list for data element type
Replace the existing Figure 5 by the following new Figure 5
value meaning
value code value
has
1.1
has 1.1
contains
2.n
derived 0.1
source document
VALUE LIST
f
of value list
IEC  2880/03
Figure 5 – Attributes of the value list for data element type
Page 22
3.4.2 Value format
Add, after the first sentence in the section marked “Comments”, the following new sentence:
The value of this attribute shall have a maximum length of 80 characters.

Page 23
3.4.4.1 Value
Delete the following sentence from the section marked “Comments”:
See also 6.4 for the relations between data element type, term and value

61360-1 Amend. 1  IEC:2003(E) – 5 –

Page 24
3.4.4.2 Value code
In the section marked “Comments”, replace the second paragraph by:

The value code of a classifying (non-quantitative) data element type shall have a maximum

length of 18 alphanumeric characters.

Page 24
3.4.4.3 Value meaning
In the section marked “Comments”, replace the existing text by the following text:
for classifying data element types the value meaning shall be defined in the note attribute of
the class that has been defined by this classifying data element type.
The value of this attribute shall have a maximum length of 70 characters
Page 24
3.4.4.4 Source document of value list
Add the following section:
Comments: the value of this attribute shall have a maximum length of 80 characters
Page 24
3.4.5 Referenced class identifier
Replace the Attribute definition by:
Attribute definition: class identifier as defined in 5.5.
Page 28
5 Component class specification
th
Replace the last sentence of the 7 paragraph by the following text:
Classifying data element types are indicated by black dots, corresponding to the nodes of the
tree, and the branches correspond to their values, the value meanings of which are defined in
the note attribute of the class that has been defined by the classifying data element type.
Page 30
Insert the following new Subclause 5.1 and renumber the subsequent subclauses
accordingly:
– 6 – 61360-1 Amend. 1  IEC:2003(E)

5.1 Shape of package outlines for components

The classification scheme for the shapes of package outlines is based on the following three

characteristics of the package according to the codes defined in IEC 60191-4:

– outline style ;
– terminal position;
– terminal form.
Based on these characteristics, five levels of classification are defined as follows:

– level 1: outline style;
– level 2: terminal position;
– level 3: terminal form;
– level 4: terminal variant;
– level 5: body variant (optional).
The specification of each class at the lowest level of the classification tree of the component
package shapes contains an attribute which makes a reference to a unique drawing. This
associated drawing contains the graphical representation of the data element types describing
the characteristic dimension parameters of that specific component package geometry.
Each drawing is unambiguously identified by an identifier. Also associated with each drawing
is a descriptive designator which is derived from the coded name of the relevant class in the
component package classification tree (see 6.1.5).
Page 30
Table 4 – List of attributes of class
Replace the existing Table 4 by the following new Table 4:
Table 4 – List of attributes of class
Attributes Subclause
Code 5.4.1
Version number 5.4.2
Revision number 5.4.3
Preferred name 5.4.4
Coded name 5.4.5
Synonymous name 5.4.6
Definition 5.5.1
Note 5.5.2
Remark 5.5.3
Drawing reference 5.5.4
Source document of class definition 5.5.5

61360-1 Amend. 1  IEC:2003(E) – 7 –

Page 31
Figure 8 – Identifying attributes for class

Replace the existing Figure 8 by the following new Figure 8:

code
has
coded name
version number
known by
has
1.1
1.1
1.1
known by 1.1
COMPONENT
preferred name revision number
CLASS has
1.1
0.2
known by
synonymous
name
IEC  2881/03
Figure 8 – Identifying attributes for class

– 8 – 61360-1 Amend. 1  IEC:2003(E)

Page 31
5.3.1 Code (now 5.4.1 …)
In the section marked “Comments”, add the following text:

In case of at least one attribute of the components class, which affects the meaning and or

communication of the components class, changed, a new (other) component class, having a

new code, shall be defined. Such an attribute is:

– definition
Page 32
5.3.3 Revision number (now 5.4.3 …)
In the sect
...