IEC 60400:2008
(Main)Lampholders for tubular fluorescent lamps and starterholders
Lampholders for tubular fluorescent lamps and starterholders
IEC 60400:2008 states the technical and dimensional requirements for lampholders for tubular fluorescent lamps and for starterholders, and the methods of test to be used in determining the safety and the fit of the lamps in the lampholders and the starters in the starterholders. This seventh edition cancels and replaces the sixth edition (1999) and its Amendments 1 (2002) and 2 (2004). This seventh edition constitutes a technical revision. In this edition, information on lampholders intended to be used in applications where they are accessible in normal use (class II luminaires as well as class I luminaries) has been introduced, as well as requirements for contact-making to pins for single-capped fluorescent lamps, introduction of new fits in the text and Annex A, and requirements for shade holder rings have been adopted.
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
La CEI 60400:2008 fixe les exigences techniques et dimensionnelles auxquelles doivent satisfaire les douilles pour lampes tubulaires à fluorescence et les douilles pour starters, ainsi que les méthodes d'essai à utiliser pour déterminer le degré de sécurité et le montage correct des lampes et des starters dans leurs douilles respectives. Cette septième édition annule et remplace la sixième édition (1999) et ses Amendements 1 (2002) et 2 (2004). Cette septième édition constitue une révision technique. Dans cette édition, des informations concernant les douilles destinées à être utilisées dans des applications où elles sont accessibles en utilisation normale (dans des luminaires de classe I comme de classe II) ont été introduites, ainsi que des exigences pour la réalisation du contact des broches de lampes fluorescentes à culot unique, l'introduction de nouveaux systèmes dans le texte et l'Annexe A, et des exigences pour les bagues supports d'abat-jour ont été adoptées.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 60400
Edition 7.0 2008-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lampholders for tubular fluorescent lamps and starterholders
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60400
Edition 7.0 2008-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lampholders for tubular fluorescent lamps and starterholders
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XC
CODE PRIX
ICS 29.140.10 ISBN 2-8318-9890-0
– 2 – 60400 © IEC:2008
CONTENTS
FOREWORD.4
1 General .6
1.1 Scope.6
1.2 Normative references .6
2 Terms and definitions .7
3 General requirement .10
4 General conditions for tests .10
5 Electrical rating.11
6 Classification .11
7 Marking .12
8 Protection against electric shock.14
9 Terminals .16
10 Construction .17
11 Resistance to dust and moisture .22
12 Insulation resistance and electric strength.23
13 Endurance .24
14 Mechanical strength.25
15 Screws, current-carrying parts and connections .26
16 Creepage distances and clearances.29
17 Resistance to heat, fire and tracking .30
18 Resistance to excessive residual stresses (season cracking) and to rusting .35
Annex A (normative) Examples of lampholders covered by this standard .75
Annex B (normative) Season cracking/corrosion test .76
Annex C (informative) Protection against electric shock – Explanatory details for the
installation of lampholders according to 8.2 .78
Bibliography .79
Figure 1 – Mounting jig for the testing of lampholders .36
Figure 2 – Mounting sheet.37
Figure 3 – Fixture for the testing of lampholder flexibility.38
Figure 4 – Test caps G5 and G13.39
Figure 5 – Impact test apparatus .40
Figure 5a – Mounting support .41
Figure 6 – Test cap for the test of Clause 13 for lampholders 2GX13.42
Figure 7 – Ball-pressure apparatus.43
Figure 8 – Bracket for fixing lampholders for the impact test .43
Figure 9 – Test caps and test assembly for testing of resistance to heat of lampholders
G13 with T marking (see 17.1) .44
Dimensions in millimetres.45
Figure 9a – Test cap and test assembly for testing of resistance to heat of lampholders
G5 with T marking (see 17.1) .45
Figure 10 – Dimensions of starterholder .46
60400 © IEC:2008 – 3 –
Figure 10a – Dimensions of holder intended for accepting only starters according to
Annex B of IEC 60155 .47
Figure 11 – "Go" plug gauges for starterholders.48
Figure 12 – Plug gauge for starterholders for testing contact making and retention .49
Figure 13 – Special plug gauge for starterholders for testing contact making.50
Figure 14 – Test cap for the test of Clause 13 for lampholders G5 .50
Figure 15 – Test cap for the test of Clause 13 for lampholders G13 .50
Figure 16 – Test cap for the test of Clause 13 for lampholders 2G13 .51
Figure 17 – Test cap for the test of Clause 13 for lampholders G20 .51
Figure 18 – Test cap for the test of Clause 13 for lampholders Fa6.51
Figure 19 – Test cap for the test of Clause 13 for lampholders G10q, GU10q and GZ10q.52
Figure 20 – Test cap for the test of Clause 13 for lampholders Fa8.52
Figure 21 – Test starter for the test of Clause 13 .53
Figure 22 – Test cap for the test of Clause 13 for lampholders R17d .54
Figure 23 – Test cap for the test of Clause 13 for lampholders 2G11 .55
Figure 24 – Test cap for the test of Clause 13 for lampholders G23 and GX23.56
Figure 25 – Test cap for the test of Clause 13 for lampholders GR8.57
Figure 26 – Test cap for the test of Clause 13 for lampholders GR10q.57
Figure 27 – Test cap for the test of Clause 13 for lampholders GX10q and GY10q.58
Figure 28 – Test cap for the test of Clause 13 for lampholders G24, GX24 and GY24 .59
Figure 29 – Test cap for the test of Clause 13 for lampholders G32 and GY32 .60
Figure 30 – Test cap for the test of 17.1 for lampholders G23.61
Figure 31 – Test cap for the test of 17.1 for lampholders GR8 .62
Figure 32 – Test cap for the test of 17.1 for lampholders GR10q.63
Figure 33 – Test cap for the test of 17.1 for lampholders GX10q.64
Figure 34 – Test cap for the test of 17.1 for lampholders GY10q.65
Figure 35 – Test cap for the test of 17.1 for lampholders 2G11 .66
Figure 36 – Test cap for the test of 17.1 for lampholders GX23.67
Figure 37 – Test cap for the test of 17.1 for lampholders G24, GX24 and GY24 .68
Figure 38 – Test cap for the test of 17.1 for lampholders G32, GX32 and GY32 .70
Figure 39 – Test cap for the test of Clause 13 for lampholders 2G8 .72
Figure 40 – Test cap for the test of Clause 13 for lampholders GX53.73
Figure 41 – Standard test finger (according to IEC 60529) .74
Figure C.1 to C.4 – Examples of lampholders .78
Table 1 – Minimum values of insulation resistance .23
Table 2 – Torque tests on screws.27
Table 3 − Minimum distances for a.c. (50 Hz/60 Hz) sinusoidal voltages − Impulse
withstand category II .29
Table 4 – Minimum distances for non-sinusoidal pulse voltages.30
Table B.1 – pH adjustment .76
– 4 –
...
IEC 60400 ®
Edition 7.2 2014-06
CONSOLIDATED
VERSION
VERSION
CONSOLIDÉE
colour
inside
Lampholders for tubular fluorescent lamps and starterholders
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des
CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 60400 ®
Edition 7.2 2014-06
CONSOLIDATED
VERSION
VERSION
CONSOLIDÉE
colour
inside
Lampholders for tubular fluorescent lamps and starterholders
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.10 ISBN 978-2-8322-1683-5
IEC 60400 ®
Edition 7.2 2014-06
REDLINE VERSION
VERSION REDLINE
colour
inside
Lampholders for tubular fluorescent lamps and starterholders
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
– 2 – IEC 60400:2008
+AMD1:2011+AMD2:2014 CSV IEC 2014
CONTENTS
FOREWORD . 5
1 General . 7
1.1 Scope . 7
1.2 Normative references . 7
2 Terms and definitions . 8
3 General requirement . 11
4 General conditions for tests . 12
5 Electrical rating . 13
6 Classification . 13
7 Marking . 14
8 Protection against electric shock . 16
9 Terminals . 18
10 Construction . 19
11 Resistance to dust and moisture . 24
12 Insulation resistance and electric strength . 25
13 Endurance . 26
14 Mechanical strength . 27
15 Screws, current-carrying parts and connections . 29
16 Creepage distances and clearances . 31
17 Resistance to heat, fire and tracking . 33
18 Resistance to excessive residual stresses (season cracking) and to rusting . 37
Annex A (normative) Examples of lampholders covered by this standard . 84
Annex B (normative) Season cracking/corrosion test . 85
Annex C (informative) Protection against electric shock – Explanatory details for the
installation of lampholders according to 8.2 . 87
Bibliography . 89
Figure 1 – Mounting jig for the testing of lampholders . 39
Figure 2 – Mounting sheet . 40
Figure 3 – Fixture for the testing of lampholder flexibility . 41
Figure 4 – Test caps G5, GX5 and G13 . 42
Figure 5 – Impact test apparatus . 43
Figure 5a – Mounting support . 44
Figure 6 – Test cap for the test of Clause 13 for lampholders 2GX13 . 45
Figure 7 – Ball-pressure apparatus . 46
Figure 8 – Bracket for fixing lampholders for the impact test . 46
Figure 9 – Test caps and test assembly for testing of resistance to heat of lampholders
G13 with T marking (see 17.1) . 47
Figure 9a – Test cap and test assembly for testing of resistance to heat of lampholders
G5 and GX5 with T marking (see 17.1) . 49
Figure 10 – Dimensions of starterholder . 50
+AMD1:2011+AMD2:2014 CSV IEC 2014
Figure 10a – Dimensions of holder intended for accepting only starters according to
Annex B of IEC 60155 . 51
Figure 11 – "Go" plug gauges for starterholders . 52
Figure 12 – Plug gauge for starterholders for testing contact making and retention . 53
Figure 13 – Special plug gauge for starterholders for testing contact making. 54
Figure 14 – Test cap for the test of Clause 13 for lampholders G5 . 54
Figure 14a – Test cap for the test of Clause 13 for lampholders GX5 . 55
Figure 15 – Test cap for the test of Clause 13 for lampholders G13 . 54
Figure 16 – Test cap for the test of Clause 13 for lampholders 2G13 . 56
Figure 17 – Test cap for the test of Clause 13 for lampholders G20 . 56
Figure 18 – Test cap for the test of Clause 13 for lampholders Fa6 . 56
Figure 19 – Test cap for the test of Clause 13 for lampholders G10q, GU10q and GZ10q . 57
Figure 20 – Test cap for the test of Clause 13 for lampholders Fa8 . 57
Figure 21 – Test starter for the test of Clause 13 . 58
Figure 22 – Test cap for the test of Clause 13 for lampholders R17d . 59
Figure 23 – Test cap for the test of Clause 13 for lampholders 2G11 . 60
Figure 24 – Test cap for the test of Clause 13 for lampholders G23 and GX23 . 61
Figure 25 – Test cap for the test of Clause 13 for lampholders GR8 . 62
Figure 26 – Test cap for the test of Clause 13 for lampholders GR10q . 62
Figure 27 – Test cap for the test of Clause 13 for lampholders GX10q and GY10q . 63
Figure 28 – Test cap for the test of Clause 13 for lampholders G24, GX24 and GY24 . 64
Figure 29 – Test cap for the test of Clause 13 for lampholders G32 and GY32 . 65
Figure 30 – Test cap for the test of 17.1 for lampholders G23 . 66
Figure 31 – Test cap for the test of 17.1 for lampholders GR8 . 67
Figure 32 – Test cap for the test of 17.1 for lampholders GR10q . 68
Figure 33 – Test cap for the test of 17.1 for lampholders GX10q .
...
IEC 60400 ®
Edition 7.1 2011-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lampholders for tubular fluorescent lamps and starterholders
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60400 ®
Edition 7.1 2011-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lampholders for tubular fluorescent lamps and starterholders
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX CS
ICS 29.140.10 ISBN 978-2-88912-610-1
– 2 – 60400 IEC:2008+A1:2011
CONTENTS
FOREWORD . 4
1 General . 6
1.1 Scope . 6
1.2 Normative references . 6
2 Terms and definitions . 7
3 General requirement . 10
4 General conditions for tests . 10
5 Electrical rating . 12
6 Classification . 12
7 Marking . 13
8 Protection against electric shock . 15
9 Terminals . 17
10 Construction . 18
11 Resistance to dust and moisture . 25
12 Insulation resistance and electric strength . 26
13 Endurance . 27
14 Mechanical strength . 28
15 Screws, current-carrying parts and connections . 30
16 Creepage distances and clearances . 32
17 Resistance to heat, fire and tracking . 35
18 Resistance to excessive residual stresses (season cracking) and to rusting . 40
Annex A (normative) Examples of lampholders covered by this standard . 87
Annex B (normative) Season cracking/corrosion test . 88
Annex C (informative) Protection against electric shock – Explanatory details for the
installation of lampholders according to 8.2 . 90
Bibliography . 92
Figure 1 – Mounting jig for the testing of lampholders . 41
Figure 2 – Mounting sheet . 42
Figure 3 – Fixture for the testing of lampholder flexibility . 43
Figure 4 – Test caps G5, GX5 and G13 . 44
Figure 5 – Impact test apparatus . 45
Figure 5a – Mounting support . 46
Figure 6 – Test cap for the test of Clause 13 for lampholders 2GX13 . 47
Figure 7 – Ball-pressure apparatus . 48
Figure 8 – Bracket for fixing lampholders for the impact test . 48
Figure 9 – Test caps and test assembly for testing of resistance to heat of lampholders
G13 with T marking (see 17.1) . 49
Figure 9a – Test cap and test assembly for testing of resistance to heat of lampholders
G5 and GX5 with T marking (see 17.1) . 51
Figure 10 – Dimensions of starterholder . 52
Figure 10a – Dimensions of holder intended for accepting only starters according
to Annex B of IEC 60155 . 53
Figure 11 – "Go" plug gauges for starterholders . 54
Figure 12 – Plug gauge for starterholders for testing contact making and retention . 55
60400 IEC:2008+A1:2011 – 3 –
Figure 13 – Special plug gauge for starterholders for testing contact making. 56
Figure 14 – Test cap for the test of Clause 13 for lampholders G5 . 56
Figure 14a – Test cap for the test of Clause 13 for lampholders GX5 . 57
Figure 15 – Test cap for the test of Clause 13 for lampholders G13 . 56
Figure 16 – Test cap for the test of Clause 13 for lampholders 2G13 . 58
Figure 17 – Test cap for the test of Clause 13 for lampholders G20 . 58
Figure 18 – Test cap for the test of Clause 13 for lampholders Fa6 . 58
Figure 19 – Test cap for the test of Clause 13 for lampholders G10q, GU10q and GZ10q . 59
Figure 20 – Test cap for the test of Clause 13 for lampholders Fa8 . 59
Figure 21 – Test starter for the test of Clause 13 . 60
Figure 22 – Test cap for the test of Clause 13 for lampholders R17d . 61
Figure 23 – Test cap for the test of Clause 13 for lampholders 2G11 . 62
Figure 24 – Test cap for the test of Clause 13 for lampholders G23 and GX23 . 63
Figure 25 – Test cap for the test of Clause 13 for lampholders GR8 . 64
Figure 26 – Test cap for the test of Clause 13 for lampholders GR10q . 64
Figure 27 – Test cap for the test of Clause 13 for lampholders GX10q and GY10q . 65
Figure 28 – Test cap for the test of Clause 13 for lampholders G24, GX24 and GY24 . 66
Figure 29 – Test cap for the test of Clause 13 for lampholders G32 and GY32 . 67
Figure 30 – Test cap for the test of 17.1 for lampholders G23 . 68
Figure 31 – Test cap for the test of 17.1 for lampholders GR8 . 69
Figure 32 – Test cap for the test of 17.1 for lampholders GR10q . 70
Figure 33 – Test cap for the test of 17.1 for lampholders GX10q . 71
Figure 34 – Test cap for the test of 17.1 for lampholders GY10q . 72
Figure 35 – Test cap for the test of 17.1 for lampholders 2G11 . 73
Figure 36 – Test cap for the test of 17.1 for lampholders GX23 . 74
Figure 37 – Test cap for the test of 17.1 for lampholders G24, GX24 and GY24 . 75
Figure 38 – Test cap for the test of 17.1 for lampholders G32, GX32 and GY32 . 77
Figure 39 – Test cap for the test of Clause 13 for lampholders 2G8 . 79
Figure 40 – Test cap for the test of Clause 13 for lampholders GX53 . 80
Figure 41 – Standard test finger (according to IEC 60529) . 81
Figure 42 – Test cap for the test of Clause 13 for lampholders W4.3x8.5d . 82
Figure 43 – Test cap for the test of Clause 13 for lampholders GR14q . 83
Figure 44 – Test cap for the test of Clause 13 for lampholders G28d . 84
Figure 45 – Test cap for the test of Clause 13 for lampholders 2GX11 . 85
Figure 46 – Test probes for checking gasket sleeves on lampholders for higher IP
protection . 86
Figure C.1 to C.4 – Examples of lampholders .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.