SC 34B - Lamp caps and holders
Standardization of lamp* caps and holders with a view to standardize both these components to ensure proper contact-making combined with interchangeability and safety. * The term Lamps includes LED for General Lighting Services
Culots et douilles
Normalisation des culots et des douilles de lampes* visant à normaliser ces éléments pour assurer un bon contact électrique associé à l'interchangeabilité et à la sécurité. * Le terme Lampes comprend les DEL pour l'éclairage général
General Information
IEC 61184:2017 This document applies to bayonet lampholders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage of 250 V.
This document also covers lampholders which are integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only.
This fourth edition cancels and replaces the third edition published in 2008 and Amendment 1:2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Restructuring of the standard in accordance with IEC Directives Part 2.
b) Clause 18: Update on creepage distances and clearances;
c) Addition of Annex B.
- Standard128 pagesEnglish languagesale 15% off
- Standard130 pagesEnglish and French languagesale 15% off
- Standard262 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
- Standard82 pagesEnglish and French languagesale 15% off
- Standard1 pageEnglish and French languagesale 15% off
- Standard65 pagesEnglish and French languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
- Standard13 pagesEnglish and French languagesale 15% off
IEC 60838-2-3:2016 applies to lampholders for double-capped linear LED lamps intended for building-in (to be used for general lighting service and with caps as listed in Annex A). Lampholders within the scope of this standard do not include heat management. Double-capped linear LED lamps can also be used with lampholders originally been designated for other technologies. The requirements for these lampholders are covered by separate standards.
This publication is to be read in conjunction with IEC 60838-1.
- Standard34 pagesEnglish and French languagesale 15% off
- Standard82 pagesEnglish and French languagesale 15% off
- Standard24 pagesEnglish and French languagesale 15% off
- Standard23 pagesEnglish and French languagesale 15% off
- Standard21 pagesEnglish and French languagesale 15% off
- Standard13 pagesEnglish and French languagesale 15% off
IEC 60400:2017 states the technical and dimensional requirements for lampholders for tubular fluorescent lamps and for starterholders, and the methods of test to be used in determining the safety and the fit of the lamps in the lampholders and the starters in the starterholders.
This eighth edition cancels and replaces the seventh edition published in 2008, Amendment 1:2011 and Amendment 2:2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- alignment with ISO/IEC drafting rules;
- renumbering of clauses, tables and figures.
This bilingual version (2017-12) corresponds to the monolingual English version, published in 2017-06.
The French version of this standard has not been voted upon.
- Standard91 pagesEnglish languagesale 15% off
- Standard183 pagesEnglish and French languagesale 15% off
- Standard383 pagesEnglish and French languagesale 15% off
- Standard380 pagesEnglish and French languagesale 15% off
- Standard18 pagesEnglish and French languagesale 15% off
- Standard26 pagesEnglish and French languagesale 15% off
- Standard40 pagesEnglish and French languagesale 15% off
- Standard20 pagesEnglish and French languagesale 15% off
- Standard26 pagesEnglish and French languagesale 15% off
- Standard60 pagesEnglish and French languagesale 15% off
- Standard22 pagesEnglish and French languagesale 15% off
- Standard13 pagesEnglish and French languagesale 15% off
IEC 60838-1:2016 applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in Annex A) and the methods of test to be used in determining the safe use of lamps in lampholders. This fifth edition cancels and replaces the fourth edition published in 2004, Amendment 1:2008 and Amendment 2:2011. This edition constitutes a technical revision. The significant technical changes in this edition with respect to the previous edition include the introduction of new or revised requirements for single and dual contact ignition voltages, steel test caps and brass test caps and an Annex E listing amended requirements/clauses which require products to be retested.
- Standard112 pagesEnglish languagesale 15% off
- Standard74 pagesEnglish and French languagesale 15% off
- Standard178 pagesEnglish and French languagesale 15% off
- Standard162 pagesEnglish and French languagesale 15% off
- Standard9 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
IEC 60238:2016 applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. It also applies to switched-lampholders for use in AC circuits only, where the working voltage does not exceed 250 V r.m.s. This ninth edition cancels and replaces the eighth edition published in 2004, Amendment 1: 2008 and Amendment 2:2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Addition of a pull test for certain E5 and E10 lampholders.
b) Annex D listing amended requirements/clauses which require products to be retested.
- Standard240 pagesEnglish languagesale 15% off
- Standard159 pagesEnglish and French languagesale 15% off
- Standard416 pagesEnglish and French languagesale 15% off
- Standard336 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
- Standard51 pagesEnglish and French languagesale 15% off
- Standard21 pagesEnglish and French languagesale 15% off
- Standard3 pagesEnglish and French languagesale 15% off
- Standard44 pagesEnglish and French languagesale 15% off
- Standard18 pagesEnglish and French languagesale 15% off
- Standard24 pagesEnglish and French languagesale 15% off
- Standard22 pagesEnglish and French languagesale 15% off
- Standard1 pageEnglish and French languagesale 15% off
- Standard46 pagesEnglish and French languagesale 15% off
- Standard22 pagesEnglish and French languagesale 15% off
- Standard12 pagesEnglish and French languagesale 15% off
- Standard1 pageEnglish and French languagesale 15% off
The contents of the corrigendum of November 2017 have been included in this copy.
- Standard22 pagesEnglish and French languagesale 15% off
- Standard15 pagesEnglish and French languagesale 15% off
- Standard19 pagesEnglish and French languagesale 15% off
- Standard54 pagesEnglish and French languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
The contents of the corrigendum of January 2018 have been included in this copy.
- Standard16 pagesEnglish and French languagesale 15% off
This consolidated version consists of the first edition (1990) and its amendment 1 (1997). Therefore, no need to order amendment in addition to this publication.
- Standard14 pagesEnglish and French languagesale 15% off
Standardizes the methods, general dimensions and preferred tolerances for the taping of these components, for example, resistors, capacitors, diodes, etc., for use in telecommunication equipment and electronic devices employing similar assembly techniques.
- Standard42 pagesEnglish and French languagesale 15% off
- Standard26 pagesEnglish and French languagesale 15% off
- Standard19 pagesEnglish and French languagesale 15% off
- Standard14 pagesEnglish and French languagesale 15% off
It has the status of a horizontal standard in accordance with IEC Guide 108.
- Standard58 pagesEnglish and French languagesale 15% off
- Standard301 pagesEnglish, French, Russian and Spanish languagesale 10% offe-Library read for1 day
- Amendment82 pagesEnglish and French languagesale 10% offe-Library read for1 day