IEC 60364-7-717:2009
(Main)Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units
Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units
IEC 60364-7-717:2009 is applicable to mobile or transportable units. For the purposes of this standard, the term "unit" refers to a vehicle and/or mobile or transportable structure in which all or part of an electrical installation is contained. Units are either of the mobile type or of the transportable type. Examples are units for television and broadcasting, medical services, advertising, fire fighting, using special information technology, units for disaster relief, catering units and the like. The requirements of this standard also apply where two or more units are connected together to form a single electrical installation. This second edition cancels and replaces the first edition published in 2001 and constitutes a technical revision. The main changes with respect to the previous edition are as follows:
- The scope has been improved, providing more detail;
- The content of Clause 717.41 has been updated following the new edition of IEC 60364-4-41;
- Clauses concerning protection by automatic disconnection of the supply and additional protection have been introduced;
- All figures have been updated.
Installations électriques à basse tension - Partie 7-717: Règles pour les installations ou emplacements spéciaux - Unités mobiles ou transportables
La CEI 60364-7-717:2009 est applicable aux unités mobiles ou transportables. Dans le cadre de cette norme, le terme "unité" s'applique à un véhicule et/ou à une structure mobile ou transportable dans lesquels une installation électrique ou une partie de celle-ci est incorporée. Les unités sont soit du type mobile ou du type transportable. Des exemples sont des unités pour la télévision ou la radiodiffusion, les services médicaux, la publicité, la lutte contre l'incendie, utilisant des technologies particulières de traitement de l'information, des unités de secours en cas de désastre, des unités de ravitaillement et similaires. Les spécifications de cette norme s'appliquent également lorsque deux ou plusieurs unités sont interconnectées pour former une seule installation électrique. Cette deuxième édition annule et remplace la première édition publiée en 2001 et constitue une révision technique. Les principales modifications par rapport à l'édition précédente sont les suivantes:
- Le domaine d'application a été amélioré et élaboré;
- Le contenu de l'Article 717.41 a été mis à jour, suite à la nouvelle édition de la CEI 60364-4-41;
- Les articles concernant la protection par coupure automatique de l'alimentation et la protection supplémentaire ont été ajoutées;
- Toutes les figures ont été mises à jour.
General Information
Relations
Standards Content (Sample)
IEC 60364-7-717 ®
Edition 2.0 2009-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage electrical installations –
Part 7-717: Requirements for special installations or locations – Mobile or
transportable units
Installations électriques à basse tension –
Partie 7-717: Règles pour les installations ou emplacements spéciaux – Unités
mobiles ou transportables
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60364-7-717 ®
Edition 2.0 2009-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage electrical installations –
Part 7-717: Requirements for special installations or locations – Mobile or
transportable units
Installations électriques à basse tension –
Partie 7-717: Règles pour les installations ou emplacements spéciaux – Unités
mobiles ou transportables
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
S
CODE PRIX
ICS 29.020; 91.140.50 ISBN 978-2-88910-178-8
– 2 – 60364-7-717 © IEC:2009
CONTENTS
FOREWORD.3
INTRODUCTION.5
717 Mobile or transportable units.6
717.1 Scope.6
717.2 Normative references .6
717.30 Assessment of general characteristics.7
717.31 Purposes, supplies and structure.7
717.312 Conductor arrangement and system earthing.7
717.313 Supplies .7
717.4 Protection for safety .8
717.41 Protection against electric shock .8
717.413 Protective measure: electrical separation .9
717.415 Additional protection.9
717.43 Protection against overcurrent .10
717.431 Requirements according to the nature of the circuits .10
717.5 Selection and erection of electrical equipment .10
717.51 Common rules.10
717.514 Identification.10
717.52 Wiring systems.10
717.55 Other equipment.11
Annex A (informative) List of notes concerning certain countries.20
Bibliography.21
Figure 717.1 – Example of connection to a Class I or Class II low voltage generating
set located inside the unit with or without an earth electrode.12
Figure 717.2 – Example of connection to a Class II low voltage generating set located
outside the unit .13
Figure 717.3 – Example of connection to any type of earthing system of a fixed
installation with automatic disconnection of supply by residual current device (RCD),
with or without an earth electrode .14
Figure 717.4 – Example of connection to a fixed electrical installation with any type of
earthing system using a simple separation transformer and an IT system with an earth
electrode .15
Figure 717.5 – Example of connection with simple separation and an IT system with an
insulation monitoring device and disconnection of supply after a first fault .
Figure 717.6 – Example of connection with simple separation and a TN system with or
without an earth electrode.16
Figure 717.7 – Example of connection to a fixed electrical installation with any type of
earthing system by using an IT system without automatic disconnection in the event of
first fault .17
Figure 717.8 – Example of connection to a fixed electrical installation with any type of
earthing system using electrical separation provided by an isolating transformer .18
60364-7-717 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –
Part 7-717: Requirements for special installations or locations –
Mobile or transportable units
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60364-7-717 has been prepared by IEC technical committee 64:
Electrical installations and protection against electric shock.
This second edition cancels and replaces the first edition published in 2001 and constitutes a
technical revision.
The main changes with respect to the previous edition are as follows:
– The scope has been improved, providing more detail;
– The content of Clause 717.41 has been updated following the new edition of
IEC 60364-4-41;
– Clauses concerning protection by automatic disconnection of the supply and additional
protection have been introduced;
– All figures have been updated.
– 4 – 60364-7-717 © IEC:2009
The text of this standard is based on the following documents:
FDIS Report on voting
64/1675/FDIS 64/1684/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The reader’s attention is drawn to the fact that Annex A lists all of the “in-some-country”
clauses on differing practices of a less permanent nature relating to the subject of this
standard.
IEC 60364 consists of the following parts, under the general title: Low-voltage electrical
instal
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.