IEC 61984:2008/COR1:2011
(Corrigendum)Corrigendum 1 - Connectors - Safety requirements and tests
Corrigendum 1 - Connectors - Safety requirements and tests
Corrigendum 1 - Connecteurs - Exigences de sécurité et essais
General Information
- Status
- Published
- Publication Date
- 17-Oct-2011
- Technical Committee
- SC 48B - Electrical connectors
- Current Stage
- PPUB - Publication issued
- Start Date
- 18-Oct-2011
- Completion Date
- 31-Oct-2011
Relations
- Effective Date
- 05-Sep-2023
Frequently Asked Questions
IEC 61984:2008/COR1:2011 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Corrigendum 1 - Connectors - Safety requirements and tests". This standard covers: Corrigendum 1 - Connectors - Safety requirements and tests
Corrigendum 1 - Connectors - Safety requirements and tests
IEC 61984:2008/COR1:2011 is classified under the following ICS (International Classification for Standards) categories: 31.220.10 - Plug-and-socket devices. Connectors. The ICS classification helps identify the subject area and facilitates finding related standards.
IEC 61984:2008/COR1:2011 has the following relationships with other standards: It is inter standard links to IEC 61984:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
IEC 61984:2008/COR1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
IEC 61984 CEI 61984
(2nd edition – 2008) (2ème édition – 2008)
Connectors – Safety requirements and tests Connecteurs – Exigences de sécurité et essais
C O RRI G E NDUM 1
6 Constructional requirements and 6 Performances et exigences de
performance construction
6.19.1.1 General 6.19.1.1 Généralités
On page 24, instead of: En page 69, au lieu de:
Clearances through slots and openings in Les distances d’isolement à travers les
enclosures of insulating material shall fentes ou ouvertures des enveloppes du
meet the values of case A of Table F.2 of matériau isolant doivent être en accord
IEC 60664-1:2007 and/or Table 2 of IEC avec les valeurs du cas A du Tableau F.2
60664-5:2007. de la CEI 60664-1:2007 et/ou du Tableau
2 de la CEI 60664-5:2007.
read: lire:
Clearances through slots and openings in Les distances d’isolement à travers les
enclosures of insulating material shall fentes ou ouvertures des enveloppes du
meet the values of case A of IEC 60664- matériau isolant doivent être en accord
1:2007 and/or IEC 60664-5:2007. avec les valeurs du cas A de la CEI
60664-1:2007 et/ou CEI 60664-5:2007.
6.19.2.1 Généralités
6.19.2.1 General
En page 69, au lieu de:
On page 24, instead of:
Les lignes de fuite doivent être
Creepage distances shall be dimensioned
dimensionnées selon la tension assignée,
according to the rated voltage according to
conformément à la CEI 60664-1 et/ou au
IEC 60664-1 and/or Table 4 of IEC 60664-
Tableau 4 de la CEI 60664-5:2007, le
5:2007, the pollution degree and insulating
degré de pollution et le matériau isolant,
material as specified according to IEC
conformément à la CEI 60664-1 et/ou au
60664-1 and/or Table 4 of IEC 60664-
Tableau 4 de la CEI 60664-5:2007. Si la
5:2007. If the rated voltage is not derived
tension assignée n’est pas dérivée de la
from the nominal voltage of the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...