IEC 60034-4:2008

Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests

IEC 60034-4:2008 applies to three-phase synchronous machines of 1 kVA rating and larger with rated frequency of not greater than 500 Hz and not less than 10 Hz. The main changes with respect to the previous edition are as follows:
- removal of certain tests for lack of relevance in current practise;
- addition of provisions for tests on machines with brushless excitation;
- addition of a table of test methods indicating preferred tests and cross-references.

Machines électriques tournantes - Partie 4: Méthodes pour la détermination, à partir d'essais, des grandeurs des machines synchrones

La CEI 60034-4:2008 est applicable aux machines synchrones triphasées dont la puissance assignée est supérieure ou égale à 1 kVA et dont la fréquence assignée est comprise entre 10 Hz au moins et 500 Hz au plus. Les principales modifications apportées à l'édition précédente sont les suivantes:
- suppression de certains essais du fait d'un manque de pertinence dans la pratique;
- ajout de dispositions pour les essais sur des machines à excitation sans balais;
- ajout d'un tableau des méthodes d'essai indiquant les essais préférentiels et les références.

General Information

• Status: Replaced
• Publication Date: 12-May-2008
• ICS: 29.160.01 - Rotating machinery in general
• Technical Committee: TC 2 - Rotating machinery
• Drafting Committee: WG 28 - TC 2/WG 28
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 27-Apr-2018

Relations

• Replaced By: IEC 60034-4-1:2018 - Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60034-4
Edition 3.0 2008-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Rotating electrical machines –
Part 4: Methods for determining synchronous machine quantities from tests

Machines électriques tournantes –
Partie 4: Méthodes pour la détermination, à partir d’essais, des grandeurs des
machines synchrones
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by

any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or

IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 60034-4
Edition 3.0 2008-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Rotating electrical machines –
Part 4: Methods for determining synchronous machine quantities from tests

Machines électriques tournantes –
Partie 4: Méthodes pour la détermination, à partir d’essais, des grandeurs des
machines synchrones
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XC
CODE PRIX
ICS 29.160 ISBN 2-8318-9706-8
– 2 – 60034-4 © IEC:2008
CONTENTS
FOREWORD.7

1 Scope.9

2 Normative references .9

3 Terms and definitions .9

4 Symbols and units .14

5 Overview of tests.15

6 Test procedures .18

6.1 General .18
6.1.1 Instrumentation requirements .18
6.1.2 Excitation system requirements .18
6.1.3 Test conditions .18
6.1.4 Per unit base quantities .19
6.1.5 Conventions and assumptions .19
6.1.6 Consideration of magnetic saturation.20
6.2 Direct measurements of excitation current at rated load .21
6.3 Direct-current winding resistance measurements.21
6.4 No-load saturation test .22
6.4.1 Test procedure .22
6.4.2 No-load saturation characteristic determination .23
6.5 Sustained three-phase short-circuit test .23
6.5.1 Test procedure .23
6.5.2 Three-phase sustained short-circuit characteristic .24
6.6 Motor no-load test .24
6.7 Phase shifting test.24
6.8 Over-excitation test at zero power-factor .25
6.9 Negative excitation test .25
6.10 On-load test measuring the load angle .25
6.11 Low slip test .25
6.12 Sudden three-phase short-circuit test .26
6.13 Voltage recovery test.27
6.14 Suddenly applied short-circuit test following disconnection from line .27
6.15 Direct current decay test in the armature winding at standstill test.27

6.16 Suddenly applied excitation test with armature winding open-circuited .28
6.17 Applied voltage test with the rotor in direct and quadrature axis positions .29
6.18 Applied voltage test with the rotor in arbitrary position.29
6.19 Single phase voltage test applied to the three phases .30
6.20 Line-to-line sustained short-circuit test .30
6.21 Sudden line-to-line short-circuit .31
6.22 Line-to-line and to neutral sustained short-circuit test.31
6.23 Negative-phase sequence test .32
6.24 Field current decay test, with the armature winding open-circuited .32
6.24.1 Test at rated speed .32
6.24.2 Test at standstill .32
6.25 Field current decay test at rated speed with the armature-winding short-
circuited .32
6.26 Suddenly applied excitation with armature winding short-circuited .33

60034-4 © IEC:2008 – 3 –
6.27 Field current decay test at standstill with two phases of armature winding

short-circuited .33

6.28 Applied voltage test with rotor removed .33

6.29 No-load retardation test.34

6.30 Suspended rotor oscillation test .34

6.31 Locked rotor test .35

6.32 Over-excitation test at zero power factor and variable armature voltage .35

6.33 Asynchronous operation during the low-voltage test .35

6.34 Applied variable frequency voltage test at standstill.36

7 Determination of quantities.38

7.1 Graphic procedures and analysis of oscillographic records.38
7.1.1 No-load saturation and three-phase, sustained short-circuit curves .38
7.1.2 Sudden three-phase short-circuit test .38
7.1.3 Voltage recovery test.41
7.1.4 Direct current decay in the armature winding at standstill .41
7.1.5 Suddenly applied excitation test with armature winding open-circuited .43
7.2 Direct-axis synchronous reactance .44
7.2.1 From no-load saturation and three-phase sustained short-circuit test .44
7.2.2 From motor no-load test .44
7.2.3 From phase shifting test .44
7.2.4 From on-load test measuring the load angle .44
7.3 Direct-axis transient reactance .45
7.3.1 From sudden three-phase short-circuit test.45
7.3.2 From voltage recovery test .45
7.3.3 From d.c. decay test in the armature winding at standstill .45
7.3.4 Calculation from test values.45
7.4 Direct-axis sub-transient reactance .45
7.4.1 From sudden three-phase short-circuit test.45
7.4.2 From voltage recovery test .46
7.4.3 From applied voltage test with the rotor in direct and quadrature axis.46
7.4.4 From applied voltage test with the rotor in arbitrary position .46
7.5 Quadrature-axis synchronous reactance.47
7.5.1 From negative excitation test.47
7.5.2 From low slip test .47
7.5.3 From phase shifting test .48

7.5.4 From on-load test measuring the load angle .49
7.6 Quadrature-axis transient reactance.49
7.6.1 From direct current decay test in the armature winding at standstill .49
7.6.2 Calculation from test values.
...