IEC PAS 63441:2022

Functional architecture of industrial internet system for industrial automation applications

IEC PAS 63441:2022 defines the functional architecture and functional model of the Industrial Internet System for industrial applications. It presents the models, structures, activities, and interaction contents between layers of the end, edge, and cloud: infrastructure as a service (IaaS), platform as a service (PaaS), and software as service (SaaS), respectively.

General Information

• Status: Published
• Publication Date: 17-Oct-2022
• ICS: 25.040 - Industrial automation systems
• Technical Committee: TC 65 - Industrial-process measurement, control and automation
• Current Stage: PPUB - Publication issued
• Start Date: 09-Aug-2022
• Completion Date: 18-Oct-2022

Standards Content (Sample)

IEC PAS 63441
®

Edition 1.0 2022-10
PUBLICLY AVAILABLE
SPECIFICATION

colour
inside


Functional architecture of industrial internet system for industrial automation
applications
IEC PAS 63441:2022-10(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2022 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].

---------------------- Page: 2 ----------------------
IEC PAS 63441

®


Edition 1.0 2022-10




PUBLICLY AVAILABLE



SPECIFICATION








colour

inside










Functional architecture of industrial internet system for industrial automation

applications


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 25.040 ISBN 978-2-8322-3964-3




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC PAS 63441:2022  IEC 2022
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, abbreviated terms, and acronyms . 7
3.1 Terms and definition . 7
4 General . 9
4.1 Function and architecture. 9
4.1.1 Hierarchy . 9
4.1.2 Activities of End Layer (Layer 0) . 10
4.1.3 Activities of Edge Layer (Layer 1) . 11
4.1.4 Activities of IaaS Layer (Layer 2) . 11
4.1.5 Activities of PaaS Layer (Layer 3) . 11
4.1.6 Activities of SaaS Layer (Layer 4) . 11
4.1.7 Security . 11
4.2 Functional Model . 11
5 End layer . 13
5.1 Overview. 13
5.2 Model and architecture . 13
5.3 Activities of End Layer . 14
5.4 End Supports to Edge . 14
6 Edge Layer . 15
6.1 Overview. 15
6.2 Model and architecture . 15
6.3 Activities of Edge Layer . 16
6.4 Edge Supports to IaaS . 16
6.5 Edge Supports to PaaS . 16
7 IaaS Layer . 17
7.1 Overview. 17
7.2 Model and architecture . 17
7.3 Activities of IaaS Layer . 18
7.4 IaaS Supports to PaaS . 18
8 PaaS Layer. 18
8.1 Overview. 18
8.2 Model and Architecture . 19
8.3 Activities of PaaS Layer . 20
8.4 PaaS Supports to SaaS . 20
9 SaaS Layer. 20
9.1 Overview. 20
9.2 Model and architecture . 21
9.3 Activities of SaaS . 21
Annex A (informative) Architecture Case of Industrial Internet System . 22
A.1 Overview. 22
A.2 Application cases . 22
A.2.1 End and Edge Layer . 22
A.2.2 IaaS Layer . 23

---------------------- Page: 4 ----------------------
IEC PAS 63441:2022  IEC 2022 – 3 –
A.2.3 PaaS Layer . 24
A.2.4 SaaS Layer . 25
A.2.5 Smart Application Implementation of SaaS Platform . 26
Annex B (informative) Architecture of Mass Customization Platform . 29
Bibliography . 31

Figure 1 – Overall architecture of industrial Internet system . 10
Figure 2 – Functional model of industrial Internet . 12
Figure 3 – Structure of end layer . 14
Figure 4 – Functional model of edge layer . 15
Figure 5 – Functional structure of IaaS . 17
Figure 6 – Functional model of PaaS layer . 19
Figure 7 – Functional model of SaaS . 21
Figure A.1 – Overall architecture of the industrial Internet system in this case . 22
Figure A.2 – Full lifecycle service framework of the end and edge layer . 23
Figure A.3 – IaaS framework . 24
Figure A.4 – PaaS service architecture . 25
Figure A.5 – Service pattern framework of SaaS . 26
Figure A.6 – Equipment management application architecture . 27
Figure A.7 – Energy management application architecture . 28
Figure B.1 – Overall technical architecture of mass customization platform . 29

---------------------- Page: 5 ----------------------
– 4 – IEC PAS 63441:2022  IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FUNCTIONAL ARCHITECTURE OF INDUSTRIAL INTERNET
SYSTEM FOR INDUSTRIAL AUTOMATION APPLICATIONS

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
A PAS is an intermediate specification made available to the public and needing a lower level
of consensus than an International Standard to be approved by vote (simple majority).
IEC PAS 63441 has been processed by IEC technical committee 65: Industrial-process
measurement, control and automation.
The text of this PAS is based on the This PAS was approved for
following document: publication by the P-members of the
committee concerned as indicated in
the following document
Draft PAS Report on voting
65/927/DPAS 65/933/RVDPAS

Following publication of this PAS, which is a pre-standard publication, the technical committee
or subcommittee concerned may transform it into an International Standard.

---------------------- Page: 6 ----------------------
IEC PAS 63441:2022  IEC 2022 – 5 –
This PAS shall remain valid for an initial maximum period of 2 years starting from the publication
date. The validity may be extended for a single period up to a maximum of 2 years, at the end
of which it shall be published as another type of normative document, or shall be withdrawn.

IMPORTANT – The "colour inside" logo on the cover page of this document indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.

---------------------- Page: 7 ----------------------
– 6 – IEC PAS 63441:2022  IEC 2022
INTRODUCTION
For traditional plants, each piece of equipment is isolated, and the production data of equipment
is collected manually, while the efficiency of manual statistics is also very low. With the
continuous development of industrial automation, digitalization, and intelligent technologies, the
intelligent and connected plant combined with "end-edge-cloud" collaboration extends the
scope of the original plant and builds close ties between people and production equipment via
data. In this way, it realizes the whole process with real-time interconnection between users,
equipment and products, achieving zero distance between them, with transparent visibility of
the whole process. In addition, the in-depth application of artificial intelligence and big data
technologies in the industrial field contributes a large number of algorithms for intelligent
optimization and decision-making, thus providing critical solutions for upgrading toward
intelligent industrial systems.

---------------------- Page: 8 ----------------------
IEC PAS 63441:2022  IEC 2022 – 7 –
FUNCTIONAL ARCHITECTURE OF INDUSTRIAL INTERNET
SYSTEM FOR INDUSTRIAL AUTOMATION APPLICATIONS



1 Scope
This document defines the functional architecture and functional model of the industrial internet
system for industrial applications. It presents the models, structures, activities, and interaction
contents between layers of the end, edge, and cloud: infrastructure as a service (IaaS), platform
as a service (PaaS), and software as service (SaaS), respectively.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 62264-1:2013, Enterprise-control system integration – Part 1: Models and terminology
IEC 62264-2:2013, Enterprise-control system integration – Part 2: Object and attributes for
enterprise-control system integration
IEC 62264-3:2016, Enterprise-control system integration – Part 3: Activity models of
manufacturing operations management
3 Terms, definitions, abbreviated terms, and acronyms
3.1 Terms and definition
For the purposes of this document, the terms and definitions given in IEC 62264-1, IEC 62264-2
and IEC 62264-3 as well as the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1.1
industrial application
software which is based on the industrial internet, carries industrial know-how and experience,
and meets specific needs
3.1.2
industrial big data
generic term of industrial data including enterprise informatization data, industrial IoT data, and
external cross-field data
3.1.3
industrial internet system
industrial cloud system that builds a service system based on massive data collection,
aggregation, and analysis, and supports the ubiquitous connection of manufacturing resources,
flexible supply, and efficient allocation

---------------------- Page: 9 ----------------------
– 8 – IEC PAS 63441:2022  IEC 2022
3.1.4
platform as a service
PaaS
business model providing the operation and development environment of application services
as a cloud service
Note 1 to entry: PaaS is located between the IaaS and SaaS models and provides the development and operating
environment for applications.
3.1.5
software as service
SaaS
model of providing software through the internet
Note 1 to entry: The vendor deploys applications on its own servers. Customers may order the required application
services from vendors via the internet according to their actual needs, pay the vendor according to the number of
services ordered and the period of services, and obtain the services through the internet.
3.1.6
infrastructure as a service
IaaS
model of utilization of all computing infrastructure as a service, including processing CPU,
memory, storage, network, and other basic computing resources
Note 1 to entry: In this model, users are able to deploy and run any software, including operating systems and
applications. Customers do not manage or control any cloud computing infrastructure, but are able to control the
choice of operating system, storage space, deployed applications, and potentially obtain the control of restricted
network components (such as routers, firewalls, and load balancers).
3.1.7
data management
process of efficiently collecting, storing, processing, and applying data using computer
hardware and software technologies
3.1.8
microservice
independently deployable artifact providing a service implementing a specific functional part of
an application
[SOURCE: ISO/IEC TS 23167:2020, 3.15]
3.1.9
microservices architecture
design approach that divides an application into a set of microservices
[SOURCE: ISO/IEC TS 23167:2020, 3.16]
3.1.10
cloud service
one or more capabilities offered via cloud computing invoked using a defined interface
[SOURCE: ISO/IEC 20924:2018, 3.1.8]
3.1.11
software defined networking
set of techniques that enables to directly program, orchestrate, control and manage network
resources, which facilitate the design, delivery and operation of network services in a dynamic
and scalable manner
[SOURCE: ISO/IEC TR 22417:2017, 3.9]

---------------------- Page: 10 ----------------------
IEC PAS 63441:2022  IEC 2022 – 9 –
3.1.12
data processing
systematic performance of operations upon data
[SOURCE: ISO/IEC 2382-1:1993]
3.2 Abbreviated terms and acronyms
For the purposes of this document, the abbreviated terms and acronyms given the following
apply.
API Application Programming Interface
DCS Distributed Control System
EAL Edge Application Layer
ECS Elastic Container Service
EFL Edge Foundation Layer
EIP Elastic IP
IaaS Infrastructure as a Service
IP Internet Protocol
LAN Local Area Network
LoP List of Properties
OPC UA OPC Unified Architecture
PaaS Platform as a Service
PLC Programmable Logic Controller
PLM Product Lifecycle Management
SaaS Software as a Service
SLB Server Load Balancer
SDN Software Defined Networking
TSD Time series data
TSN Time Sensitive Networking
VPC Virtual Private Cloud
VPN Virtual Private Network

4 General
4.1 Function and architecture
4.1.1 Hierarchy
The overall functions of the industrial internet system include:
– Synchronous collection and transmission of multi-source heterogeneous data, such as
industrial process data, video, and audio;
– Edge data processing and real-time condition perception: Use edge equipment to realize
the connection and unified management of industrial process related equipment;
– Visual analysis and know-how database construction combining industrial mechanism with
big data, so as to ensure data association analysis;
– Design, management and decision-making based on industrial data analysis to support
personalized service requirements.

---------------------- Page: 11 ----------------------
– 10 – IEC PAS 63441:2022  IEC 2022
The industrial internet system includes end, edge, and cloud architecture. It is divided into 5
layers:
– Layer 0: end layer;
– Layer 1: edge layer;
– Layer 2: IaaS layer;
– Layer 3: PaaS layer;
– Layer 4: SaaS layer.
See Figure 1.

Key
PERS persons
EQPT equipment
MATL material
Figure 1 – Overall architecture of industrial internet system
4.1.2 Activities of End Layer (Layer 0)
Main activities of end layer:
– Provide data perception, collection, and storage in the process of industrial production
activities;
– Provide equipment connection and network transmission environment in industrial
production activities;
– Perform the tasks of production units in industrial production activities.

---------------------- Page: 12 ----------------------
IEC PAS 63441:2022  IEC 2022 – 11 –
4.1.3 Activities of Edge Layer (Layer 1)
Main activities of edge layer:
– Provide pre-processing of multi-source heterogeneous industrial data and guarantee real-
time;
– Provide the functions of isolation and protection between industrial applications and
industrial internet infrastructure (such as terminal devices and servers).
4.1.4 Activities of IaaS Layer (Layer 2)
Main activities of IaaS layer:
– Provide computing resources, network resources, storage resources, and related resource
services, and serve as the basis for the operation of the industrial cloud layer.
4.1.5 Activities of PaaS Layer (Layer 3)
Main activities of PaaS layer:
– Provide the service environment and tools for the whole life cycle of industrial products;
– Provide the conversion, cleaning, hierarchical storage, analysis and mining, and visualized
processing of the industrial big data;
– Encapsulate the processes, data, and models in industrial production and IT technologies,
know-how, and methods into industrial microservices and micro-components;
– Access various industrial resources, and process, combine and optimize them to form
modular manufacturing capability.
4.1.6 Activities of SaaS Layer (Layer 4)
Main activities of SaaS layer:
– Realize the whole life cycle coordination and management of industrial products from
requirement interaction, design, manufacturing, all the way to sales;
– Realize the effective integration of industrial production resources, simplify enterprise
processes, and reduce costs;
– Enhance the utilization rate of resources and production efficiency of industrial enterprises
by offering services.
4.1.7 Security
Security requirements should be considered in the process of design, implementation, and
operation, at all levels of the industrial internet, including risk assessment and privacy
management:
– Data collection, storage, and processing;
– Network transmission;
– Data and application services.
See relevant requirements specified in IEC 62443, ISO 27000, ISO/IEC 27005:2018,
ISO/IEC 20547-4, ISO/IEC 14888-3, ISO/IEC 19944, ISO/IEC 17788, ISO/IEC 17789,
ISO/IEC 27017, ISO/IEC 27018, and ISO/IEC 27002.
4.2 Functional Model
See Figure 2 for the functional model of the industrial internet.

---------------------- Page: 13 ----------------------
– 12 – IEC PAS 63441:2022  IEC 2022

Figure 2 – Functional model of industrial internet
Service requirements of the industrial internet include:
– Realize the networking allocation, collaborative R&D, and production of resources in the
whole production process in cross-industry chains, between enterprise departments, and
between production units within enterprises;
– Meet the requirements of mass customization;
– Meet the management requirements of production efficiency, cost, product quality, safety,
and energy efficiency;
– Realize intelligent operation and maintenance management of equipment;
– Realize the interconnection of production resources (personnel, equipment, materials, etc.)
with models and services.
The hierarchical model and requirements of the industrial internet for industrial applications can
be divided into end, edge, cloud, and service requirements from the system level.
From the perspective of the whole life cycle of the plant, it can be divided into three stages
according to the construction progress of the plant:
a) plant construction;
b) plant commissioning/operation;
c) plant optimization.
In the plant construction stage, the digital model of the overall design, process flow, and layout
of the plant for service requirements based on the plant simulation and digital design system is
built; the simulation visualizes the production process data and helps to optimize the production

---------------------- Page: 14 ----------------------
IEC PAS 63441:2022  IEC 2022 – 13 –
process. This stage also creates a network architecture model for plant communication to
realize the information interconnection between various links of the manufacturing process,
such as process, production, inspection, and logistics, and between the manufacturing process
and the data collection and monitoring system, manufacturing execution system, and enterprise
resource planning system. A digital model of production planning, scheduling, and execution is
built to realize analysis and decision making, quantitative process management, dynamic cost
and quality tracking, and collaborative optimization from raw materials to finished products.
In the plant commissioning/operation stage and the optimization stage, the data about
personnel, equipment, materials, etc., are collected and related assets are managed at the end
layer. In the meantime, such data are interconnected through industrial network technologies,
passed to the edge layer for real-time data analysis and processing, and interoperated through
OPC UA, TSN, SDN, and other technical means. Moreover, data storage management and
virtualization are realized at the IaaS layer. Then, combined with industrial models such as
process model, mechanism model, and data model, big data analysis technologies are applied
to process and integrate the collected data to provide such services as production and operation
monitoring, operation process monitoring, data visualization, quality management, process
inspection ma
...