ISO/IEC 14543-5-104:2024
(Main)Information technology - Home electronic system (HES) architecture - Part 5-104: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - RA server-based smart lock application
Information technology - Home electronic system (HES) architecture - Part 5-104: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - RA server-based smart lock application
ISO/IEC 14543-5-194:2024(E) specifies the remote access (RA) server-based application framework, device interaction model, flow process and interfaces, and message formats to achieve intelligent grouping, resource sharing and service collaboration among IGRS smart lock devices.
This document is applicable to smart lock devices with direct network connections or connections through an intermediary network to a server for security authentication. This server utilizes a method to minimize the possibility of unauthorized access to these smart locks, while maintaining seamless interoperability among users, smart lock devices and RA servers at home, office or other remote environments.
General Information
Buy Standard
Standards Content (Sample)
ISO/IEC 14543-5-104
Edition 1.0 2024-01
INTERNATIONAL
STANDARD
colour
inside
Information technology – Home electronic system (HES) architecture –
Part 5-104: Intelligent grouping and resource sharing for HES Class 2 and
Class 3 – RA server-based smart lock application
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
IEC or IEC's member National Committee in the country of the requester. If you have any questions about ISO/IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 500 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 25 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
ISO/IEC 14543-5-104
Edition 1.0 2024-01
INTERNATIONAL
STANDARD
colour
inside
Information technology – Home electronic system (HES) architecture –
Part 5-104: Intelligent grouping and resource sharing for HES Class 2 and
Class 3 – RA server-based smart lock application
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 35.240.67 ISBN 978-2-8322-8091-1
– 2 – ISO/IEC 14543-5-104:2024
ISO/IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviated terms . 9
3.1 Terms and definitions . 9
3.2 Abbreviated terms . 10
4 Conformance . 11
5 Overview . 11
6 Smart lock server management framework . 11
6.1 Overview. 11
6.2 Bluetooth smart lock server management framework: remote access server
(RAS). 13
6.3 Bluetooth smart lock server management framework: remote access client
(RAC) . 14
6.4 Bluetooth smart lock server management framework: Bluetooth gateway
(BGW) . 15
6.5 Bluetooth smart lock server management framework: Bluetooth smart lock
device (BSLD) . 17
6.6 Bluetooth smart lock server management framework: third party service
platform (TPSP) . 20
7 Standard interfaces between remote access client and server management
framework . 20
7.1 User registration management . 20
7.2 User authentication management . 20
7.3 Bluetooth smart lock device (BSLD) discovery . 21
7.4 Bluetooth smart lock device (BSLD) registration management . 21
7.5 Bluetooth smart lock device (BSLD) removal management . 22
7.6 Response status code . 22
7.7 Generic message format used between remote access client (RAC) and
remote access server (RAS) . 23
8 Standard data format used among remote access client (RAC), Bluetooth gateway
(BGW) and Bluetooth smart lock device (BSLD) . 23
Annex A (informative) Specific example of interfaces between remote access client
(RAC) and remote access server (RAS) . 27
Bibliography . 28
Figure 1 – Interaction models of Bluetooth smart lock device in the server management
framework . 12
Figure 2 – BSLSMF RAS components . 13
Figure 3 – BSLSMF RAC components . 14
Figure 4 – BSLSMF BGW components . 16
Figure 5 – BGW message flow process . 17
Figure 6 – BSLD registration process to RAS . 18
Figure 7 – BSLD control flow process . 19
Figure 8 – User registration request message . 20
Figure 9 – User authentication request message. 21
ISO/IEC 2024
Figure 10 – BSLD authentication request message . 21
Figure 11 – BSLD registration request message . 21
Figure 12 – BSLD removal request message . 22
Figure A.1 – User registration request message . 27
Figure A.2 – User registration response message . 27
Table 1 – Response status codes and their message contents . 22
Table 2 – Message push data format between RAS and RAC . 23
Table 3 – Write user account ID request . 24
Table 4 – Write user account ID response . 24
Table 5 – Authenticate user account ID request . 25
Table 6 – Authenticate user account ID response . 25
Table 7 – BSLD lock and unlock operation request . 26
Table 8 – BSLD lock and unlock operation response . 26
– 4 – ISO/IEC 14543-5-104:2024
ISO/IEC 2024
INFORMATION TECHNOLOGY –
HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE –
Part 5-104: Intelligent grouping and resource sharing for HES Class 2
and Class 3 – RA server-based smart lock application
FOREWORD
1) ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental,
in liaison with ISO and IEC, also take part in the work.
2) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC and ISO National bodies.
3) IEC and ISO documents have the form of recommendations for international use and are accepted by IEC and
ISO National bodies in that sense. While all reasonable efforts are made to ensure that the technical content of
IEC and ISO documents is accurate, IEC and ISO cannot be held responsible for the way in which they are used
or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC and ISO National bodies undertake to apply IEC and ISO
documents transparently to the maximum extent possible in their national and regional publications. Any
divergence between any IEC and ISO document and the corresponding national or regional publication shall be
clearly indicated in the latter.
5) IEC and ISO do not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC and ISO marks of conformity. IEC and ISO are not
responsible for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this document.
7) No liability shall attach to IEC and ISO or their directors, employees, servants or agents including individual
experts and members of its technical committees and IEC and ISO National bodies for any personal injury,
property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including
legal fees) and expenses arising out of the publication, use of, or reliance upon, this ISO/IEC document or any
other IEC and ISO documents.
8) Attention is drawn to the Normative references cited in this document. Use of the referenced publications is
indispensable for the correct application of this document.
9) IEC and ISO draw attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC and ISO take no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, IEC and ISO had not received notice of
(a) patent(s), which may be required to implement this document. However, implementers are cautioned that this
may not represent the latest information, which may be obtained from the patent database available at
https://patents.iec.ch and www.iso.org/patents. IEC and ISO shall not be held responsible for identifying any or
all such patent rights.
ISO/IEC 14543-5-104 has been prepared by subcommittee 25: Interconnection of information
technology equipment, of ISO/IEC joint technical committee 1: Information technology. It is an
International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
JTC1-SC25/3122/CDV JTC1-SC25/3171/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
ISO/IEC 2024
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1, available at www.iec.ch/members_experts/refdocs
and www.iso.org/directives.
The list of all currently available parts of the ISO/IEC 14543 series, under the general title
Information
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.