iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62674-1:2012

(Main)

High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment

High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment

IEC 62674-1:2012 applies to fixed surface mount inductors and ferrite beads. The object of this standard is to define the terms necessary to describe the inductors covered by this standard, provide recommendations for preferred characteristics, recommended performance, test methods and general guidance.

Composants inductifs à haute fréquence - Partie 1: Inductances fixes pour montage en surface utilisées dans les matériels électroniques et les équipements de télécommunications

La CEI 62674-1:2012 s'applique aux inductances fixes pour montage en surface et aux perles de ferrite. La présente norme a pour objet de définir les termes nécessaires pour décrire les inductances couvertes par la présente norme, donner les recommandations pour les caractéristiques préférentielles, les performances recommandées, les méthodes d'essai et les lignes directrices générales.

General Information

Status
Published
Publication Date
11-Oct-2012
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
29.100.10 - Magnetic components
Technical Committee
TC 51 - Magnetic components, ferrite and magnetic powder materials
Drafting Committee
WG 9 - TC 51/WG 9
Current Stage
PPUB - Publication issued
Start Date
31-Oct-2012
Completion Date
12-Oct-2012
Ref Project

Buy Standard

IEC 62674-1:2012 - High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipmentIEC 62674-1:2012 - High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment
PreviousNext
Standard
IEC 62674-1:2012 - High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment
English and French language
62 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 62674-1
®

Edition 1.0 2012-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


High frequency inductive components –
Part 1: Fixed surface mount inductors for use in electronic and
telecommunication equipment

Composants inductifs à haute fréquence –
Partie 1: Inductances fixes pour montage en surface utilisées dans les matériels
électroniques et les équipements de télécommunications

IEC 62674-1:2012

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2012 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:

IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.


A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:

Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.

---------------------- Page: 2 ----------------------
IEC 62674-1

®


Edition 1.0 2012-10




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











High frequen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 63182-2:2020(Main)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores

IEC 63182-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of ring-cores (also called toroids) made of magnetic powder, the effective parameter values to be used in calculations involving them, and gives guidelines on allowable limits of surface irregularities applicable to coated ring-cores.
The selection of core sizes for this document is based on the philosophy of including those sizes which are industrial standards, meaning that they are in broad-based use within the industry. This document is considered as a sectional specification useful in the negotiations between magnetic powder core manufacturers and users about surface irregularities.

  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 61007:2020(Main)
Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures

IEC 61007:2020 describes a number of tests for use in determining the significant parameters and performance characteristics of transformers and inductors for use in electronics and telecommunication equipment. These test methods are designed primarily for transformers and inductors used in all types of electronics applications that can be involved in any specification for such components. Even though these tests can be useful to the other types of transformers used in power distribution applications in utilities, industry, and others, the tests discussed in this document can supplement or complement the tests but are not intended to replace the tests in standards for transformers. Some of the tests described are intended for qualifying a product for a specific application, while others are test practices used for manufacturing and customer acceptance testing. The test methods described here include those parameters most commonly used in the electronics transformer and inductor industry: electric strength, resistance, power loss, inductance, impedance, balance, transformation ratio and many others used less frequently.
This edition includes the following significant technical changes with respect to the previous edition:
a) scope: the application of the scope of IEC 61007 was extended;
b) Clause 2: added new references and updated the references;
c) Clause 3: new definitions were added in 3.3, and in 3.7 the voltage-time product was redefined;
d) test procedures were updated;
e) environmental test procedures: new references were added;
f) Annexes A to G were added.
The contents of the corrigendum of June 2021 have been included in this copy.

  • Standard
    186 pages
    English and French language
    sale 15% off
IEC
IEC 63182-1:2020(Main)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification

IEC 63182-1:2020 specifies the dimensions of magnetic powder cores. This document also gives guidelines on the allowable limits of surface irregularities of magnetic powder cores. It is considered as a general specification useful in the dialogue between magnetic powder core manufacturers and users about surface irregularities.
It is intended that this document will include magnetic powder cores which are widely used and referenced in industry, either because they are included in national standards, or because they are seen to have broad-based use in industry. Where applicable, it is intended that the existing industrial name for each powder core will appear with the part within the IEC 63182 series.

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    26 pages
    English and French language
    sale 15% off
IEC
IEC 61631:2020(Main)
Test method for the mechanical strength of cores made of magnetic oxides

IEC 61631:2020 is available as IEC 61631:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61631:2020 specifies a test method for the mechanical strength of cores made of magnetic oxides. This test method is suitable for most of the E-cores, ETD-cores, I-cores and ring-cores but other core types such as U-cores could be tested according to a derived method agreed by the parties concerned. This document is also applicable to the mechanical strength measurement of magnetic powder cores. This edition includes the following significant technical changes with respect to the previous edition:
- the phrase: "This document is also applicable to the mechanical strength measurement of magnetic powder cores" has been added in the scope;
- IEC 61246 has been replaced by IEC 63093-8; EN 1002-2 has been replaced by ISO 7500-1; ISO 4677-1 and ISO 4677-2 have been withdrawn;
- dimensions D and F in Figure A.1 and Table A.1 have been changed to be consistent with Figure 1 of IEC 63093-8:2018;
- addition of the content of ring-cores test;
- addition of Annex B;
- the location of the jig is amended in Figure 3;
- in Figure 5, the roller bars are moved to the edge of the I-core, aligned with the core.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    32 pages
    English and French language
    sale 15% off
IEC
IEC 63093-9:2020(Main)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores

IEC 63093-9:2020 specifies the shapes and dimensions of ferrite cores for inductive components (transformers and chokes), whose the coil is typically made of multi-layer boards (or the coil is part of the motherboard), and the effective parameter values used in calculations. This document gives guidelines on allowable limits of surface irregularities applicable to planar-cores as well.
This document is considered as a sectional specification useful in the negotiation between ferrite core suppliers and users about surface irregularities.
This first edition cancels and replaces the first edition of IEC 60424-5 published in 2009 and first edition of IEC 62317-9 published in 2006 and its Amendment 1:2007. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous editions of IEC 60424-5 and IEC 62317-9:
a) IEC 63093-9 integrates IEC 60424-5 and IEC 62317-9;
b) Table 1, Table 2 and Table 3 in IEC 60424-5:2009 have been moved to Annex B;
c) some numbers are corrected in Table 4;
d) Table 6 is amended following IEC 60205.

  • Standard
    61 pages
    English and French language
    sale 15% off
IEC
IEC 63093-1:2020(Main)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification

IEC 63093-1:2020 specifies the dimensions and allowable limits of surface irregularities of ferrite cores.
It is intended that this document excludes ferrite cores which are specialty cores with limited use. Also, special cores which are only marginal variations upon standard cores are excluded.
IEC publishes electrical standards for families of ferrite cores, as well as this series of dimensional standards for families of ferrite cores. Modifications to the ferrite cores listed in one type of standard are reflected in the other type.
This document is considered as a general specification useful in the dialogue between ferrite core suppliers and users about surface irregularities.
This first edition cancels and replaces the second edition of IEC 60424-1 published in 2015 and the first edition of IEC 62317-1 published in 2007. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous editions of IEC 60424-1 and IEC 62317-1:
a) this document integrates IEC 60424-1 and IEC 62317-1.

  • Standard
    28 pages
    English and French language
    sale 15% off
IEC
IEC 60401-1:2020(Main)
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions

IEC 60401-1:2020 is available as IEC 60401-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60401-1:2020 provides a nomenclature of the most frequent surface, bulk and shape irregularities relevant to cores made of soft ferrites (magnetic oxides). Most irregularities are graphically exemplified as visual aids. A general recommendation is also given in Annex A for a consistent scheme for specifying the exact location of the irregularity, combining a general name for the location with more detailed qualifiers of the specified location. This document can also be useful as a terminology reference when preparing technical documentation, irregularity inspection specifications, etc. This document also presents a method for defining the designation nomenclature for the major physical attributes of soft ferrite core shapes. The purpose of this document is to facilitate uniform usage of dimensional characters by manufacturers, specifiers, and users when describing core dimensions on drawings, in tables, and on catalogue specification sheets. This second edition cancels and replaces the first edition of IEC 60401-1 published in 2002 and the second edition of IEC 60401-2 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous editions of IEC 60401-1 and IEC 60401-2:
- added the surface irregularity term “pores” in 4.3.1.6;
- added the surface irregularity term “scratch” in 4.3.6.3;
- removed the surface irregularity term “crater” in 4.1.5 of IEC 60401-1: 2002;
- removed the bulk irregularity terms “superpores” in 5.1, “inclusions” in 5.2, “internal stratification” in 5.3 and “internal crack” in 5.4 of IEC 60401-1: 2002;
- removed the contents related to “yoke ring cores” in 7.1.3 and 7.4 of IEC 60401-1:2002;
- replaced the surface irregularity term “stratification” with “lamination” in 4.3.4.7;
- replaced the location related terms “upper surface of back” with “bottom surface” and “lower surface of back” with “back surface” in Figure A.1;
- changed Clause 7 of IEC 60401-1:2002 into Annex A.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    58 pages
    English and French language
    sale 15% off
IEC
IEC 62024-2:2020(Main)
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters

IEC 62024-2:2020 is available as IEC 62024-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62024-2:2020 specifies the measuring methods of the rated direct current limits for small inductors. Standardized measuring methods for the determination of ratings enable users to accurately compare the current ratings given in various manufacturers’ data books. This document is applicable to leaded and surface mount inductors with dimensions according to IEC 62025-1 and generally with rated current less than 22 A, although inductors with rated current greater than 22 A are available that fall within the dimension restrictions of this document (no larger than a 12 mm x 12 mm footprint approximately). These inductors are typically used in DC-to-DC converters built on PCBs, for electric and telecommunication equipment, and small size switching power supply units. The measuring methods are defined by the saturation and temperature rise limitations induced solely by direct current. This edition includes the following significant technical changes with respect to the previous edition:
- addition of Table 2 and Figure 2 b).

  • Standard
    36 pages
    English and French language
    sale 15% off
IEC
IEC 63093-3:2020(Main)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches

IEC 63093-3:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of half pot-cores made of ferrite, intended to be used in inductive proximity switches. Half pot-cores for inductive proximity switches are also called PS-cores.
The selection of core sizes and shapes for this document is based on the philosophy of including those sizes and shapes which are industrial standards, either by inclusion in a national standard, or by broad-based use in industry.
This part of IEC 63093 can also be considered as a sectional specification useful in the negotiations between ferrite core manufacturers and customers about surface irregularities. It provides guidelines on the allowable limits of surface irregularities applicable to PS-cores in accordance with the relevant generic specification.
This first edition cancels and replaces the first edition of IEC 62323, published in 2005. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition of IEC 62323:
a) addition of the limits surface irregularities.

  • Standard
    28 pages
    English and French language
    sale 15% off
IEC
IEC 63093-2:2020(Main)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications

IEC 63093-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of pot-cores made of ferrite, and the dimensional limits for coil formers to be used with them, as well as the effective parameter values to be used in calculations involving them. It also gives guidelines on the allowable limits of surface irregularities applicable to pot-cores in accordance with the relevant generic specification.
The selection of core sizes and shapes for this document is based on the philosophy of including those sizes which are industrial standards, either by inclusion in a national standard, or by broad-based use in industry. See IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be included.
The general considerations upon which the design of this range of cores is based are given in Annex A.
This first edition cancels and replaces the first edition of IEC 62317-2 published in 2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition of IEC 62317-2:
a) addition of the limits of surface irregularities;
b) Table 4 and Table 5 are updated in accordance with IEC 60205:2016.

  • Standard
    42 pages
    English and French language
    sale 15% off