IEC 61158-5-23:2019

Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements

IEC 61158-5-23:2019 defines the services provided to the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the IEC fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545).
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
•addition of an attribute for Master ID (see 3.2.10, 6.4.3, 6.4.4 and 6.4.5)

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-23 : Définition des services de la couche application - Éléments de type 23

L’IEC 61158-5-23:2019 fournit des éléments communs pour les communications de messagerie prioritaires et non prioritaires élémentaires entre les programmes d’application des environnements d’automatisation et le matériel spécifique au bus de terrain de type 12. On utilise le terme "prioritaire" pour traduire la présence d’une fenêtre temporelle, à l’intérieur de laquelle il est exigé qu'une ou plusieurs actions spécifiées soient terminées avec un niveau de certitude défini. Si les actions spécifiées ne sont pas réalisées dans la fenêtre temporelle, les applications demandant les actions risquent de connaître une défaillance, avec les risques que cela comporte pour les équipements, les installations et éventuellement la vie humaine.

General Information

• Status: Published
• Publication Date: 17-Apr-2019
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.70 - Application layer
• ICS: 35.110 - Networking
• Technical Committee: SC 65C - Industrial networks
• Drafting Committee: WG 9 - TC 65/SC 65C/WG 9
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 09-Mar-2023

Relations

• Revises: IEC 61158-5-23:2014 - Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements
• Effective Date: 05-Sep-2023
• Revised: IEC 61158-5-23:2023 - Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61158-5-23 ®
Edition 2.0 2019-04
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-23: Application layer service definition – Type 23 elements

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: [e-mail].
IEC 61158-5-23 ®
Edition 2.0 2019-04
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –

Part 5-23: Application layer service definition – Type 23 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-6766-0

– 2 – IEC 61158-5-23:2019 © IEC 2019
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
1.1 General . 8
1.2 Specifications . 9
1.3 Conformance . 9
2 Normative references . 9
3 Terms, definitions, symbols, abbreviated terms and conventions . 10
3.1 Referenced terms and definitions . 10
3.1.1 ISO/IEC 7498-1 terms. 10
3.1.2 ISO/IEC 8822 terms . 10
3.1.3 ISO/IEC 9545 terms . 10
3.1.4 ISO/IEC 8824-1 terms. 11
3.1.5 IEC 61158-1 terms. 11
3.2 Additional Type 23 terms and definitions . 11
3.3 Symbols and abbreviated terms . 13
3.4 Conventions . 14
3.4.1 General conventions . 14
3.4.2 Conventions for class definitions . 15
3.4.3 Conventions for service definitions . 16
4 Concept . 17
5 Data type ASE . 17
5.1 Overview . 17
5.2 Fixed length types . 18
5.2.1 Bitstring types . 18
5.2.2 Numeric types . 19
6 Communication model specification . 23
6.1 Communication model . 23
6.1.1 General . 23
6.1.2 Cyclic model n:n . 23
6.1.3 Cyclic model 1:n . 24
6.1.4 Transient model . 24
6.2 ASE . 25
6.2.1 Overview type C . 25
6.2.2 Overview type F. 25
6.2.3 Cyclic data ASE type C . 25
6.2.4 Cyclic data ASE type F . 32
6.2.5 Acyclic data ASE type C . 37
6.2.6 Acyclic data ASE type F . 43
6.2.7 Management ASE . 56
6.2.8 Synchronization ASE . 59
6.2.9 Measurement ASE . 60
6.3 AR type C . 61
6.3.1 Overview . 61
6.3.2 Connection Control . 62
6.3.3 Cyclic transmission type C . 66

6.3.4 Acyclic transmission type C . 68
6.3.5 Common parameter dist. 70
6.4 AR type F . 75
6.4.1 Overview . 75
6.4.2 Channel control . 75
6.4.3 Cyclic transmission type F . 82
6.4.4 Acyclic transmission type F . 84
6.4.5 Parameter dist . 87
6.4.6 Synchronous trigger . 90
6.4.7 Measurement transmission . 91
Bibliography . 94

Figure 1 – Cyclic model (n:n type distributed shared memory, unconfirmed push model) . 24
Figure 2 – Cyclic model (1:n type distributed shared memory, unconfirmed push model) . 24
Figure 3 – Transient model (Client server model) . 24
Figure 4 – Transient model (Push model). 25
Figure 5 – Structure of ASE type C of FAL type 23 . 25
Figure 6 – Structure of ASE type F of FAL Type 23 . 25
Figure 7 – Structure of AR type C . 62
Figure 8 – Structure of AR type F. 75

Table 1 – Ld service parameters . 27
Table 2 – Set service parameters . 27
Table 3 – Reset service parameters . 27
Table 4 – Read service parameters. 28
Table 5 – Write service parameters . 28
Table 6 – Ld service parameters . 29
Table 7 – Set service parameters . 30
Table 8 – Reset service parameters . 30
Table 9 – Read service parameters. 31
Table 10 – Write service parameters . 31
Table 11 – Ld service parameters . 33
Table 12 – Set service parameters . 34
Table 13 – Reset service parameters . 34
Table 14 – Read service parameters . 35
Table 15 – Write service parameters . 35
Table 16 – Get memory access info service parameters . 38
Table 17 – Run service parameters. 39
Table 18 – Stop service parameters . 40
Table 19 – Read memory service parameters . 41
Table 20 – Write memory service parameters . 42
Table 21 – Get memory access info service parameters . 44
Table 22 – Run service parameters. 45
Table 23 – Stop service parameters . 46

– 4 – IEC 61158-5-23:2019 © IEC 2019
Table 24 – Read memory service parameters . 47
Table 25 – Write memory service parameters . 48
Table 26 – Vendor command service parameters . 49
Table 27 – Distribute node info service parameters . 50
Table 28 – Get statistics service parameters . 51
Table 29 – Get node info detail service p
...

IEC 61158-5-23 ®
Edition 2.0 2019-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 5-23: Application layer service definition – Type 23 elements

Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 5-23: Définition des services de la couche application – Eléments de
type 23
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 61158-5-23 ®
Edition 2.0 2019-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –

Part 5-23: Application layer service definition – Type 23 elements

Réseaux de communication industriels – Spécifications des bus de terrain –

Partie 5-23: Définition des services de la couche application – Eléments de

type 23
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-9269-3

– 2 – IEC 61158-5-23:2019 © IEC 2019
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
1.1 General . 8
1.2 Specifications . 9
1.3 Conformance . 9
2 Normative references . 9
3 Terms, definitions, symbols, abbreviated terms and conventions . 10
3.1 Referenced terms and definitions . 10
3.1.1 ISO/IEC 7498-1 terms. 10
3.1.2 ISO/IEC 8822 terms . 10
3.1.3 ISO/IEC 9545 terms . 10
3.1.4 ISO/IEC 8824-1 terms. 11
3.1.5 IEC 61158-1 terms. 11
3.2 Additional Type 23 terms and definitions . 11
3.3 Symbols and abbreviated terms . 13
3.4 Conventions . 14
3.4.1 General conventions . 14
3.4.2 Conventions for class definitions . 15
3.4.3 Conventions for service definitions . 16
4 Concept . 17
5 Data type ASE . 17
5.1 Overview . 17
5.2 Fixed length types . 18
5.2.1 Bitstring types . 18
5.2.2 Numeric types . 19
6 Communication model specification . 23
6.1 Communication model . 23
6.1.1 General . 23
6.1.2 Cyclic model n:n . 23
6.1.3 Cyclic model 1:n . 24
6.1.4 Transient model . 24
6.2 ASE . 25
6.2.1 Overview type C . 25
6.2.2 Overview type F. 25
6.2.3 Cyclic data ASE type C . 25
6.2.4 Cyclic data ASE type F . 32
6.2.5 Acyclic data ASE type C . 37
6.2.6 Acyclic data ASE type F . 43
6.2.7 Management ASE . 56
6.2.8 Synchronization ASE . 59
6.2.9 Measurement ASE . 60
6.3 AR type C . 61
6.3.1 Overview . 61
6.3.2 Connection Control . 62
6.3.3 Cyclic transmission type C . 66

6.3.4 Acyclic transmission type C . 68
6.3.5 Common parameter dist. 70
6.4 AR type F . 75
6.4.1 Overview . 75
6.4.2 Channel control . 75
6.4.3 Cyclic transmission type F . 82
6.4.4 Acyclic transmission type F . 84
6.4.5 Parameter dist . 87
6.4.6 Synchronous trigger . 90
6.4.7 Measurement transmission . 91
Bibliography . 94

Figure 1 – Cyclic model (n:n type distributed shared memory, unconfirmed push model) . 24
Figure 2 – Cyclic model (1:n type distributed shared memory, unconfirmed push model) . 24
Figure 3 – Transient model (Client server model) . 24
Figure 4 – Transient model (Push model). 25
Figure 5 – Structure of ASE type C of FAL type 23 . 25
Figure 6 – Structure of ASE type F of FAL Type 23 . 25
Figure 7 – Structure of AR type C . 62
Figure 8 – Structure of AR type F. 75

Table 1 – Ld service parameters . 27
Table 2 – Set service parameters . 27
Table 3 – Reset service parameters . 27
Table 4 – Read service parameters. 28
Table 5 – Write service parameters . 28
Table 6 – Ld service parameters . 29
Table 7 – Set service
...