Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte

IEC 60384-15:2017 applies to through-hole/leaded polar and bipolar tantalum electrolyte capacitors with solid and non‑solid electrolyte for use in electronic equipment. It includes capacitors for long‑life applications and capacitors for general‑purpose applications.
This document prescribes preferred ratings and characteristics and to select from IEC 60384‑1:2016 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor.
This edition includes the following significant technical changes with respect to the previous edition:
a) Revision of the structure in accordance with ISO/IEC Directives, Part 2:2016 (seventh edition) to the extent practicable, and harmonization between other similar kinds of documents.
b) In addition, Clause 4 and all the tables have been reviewed in order to prevent duplications and contradictions.

Condensateurs fixes utilisés dans les équipements électroniques - Partie 15: Spécification intermédiaire - Condensateurs fixes au tantale, à électrolyte non solide ou solide

L’IEC 60384-15:2017 s’applique aux condensateurs au tantale à montage par trous/au plomb, polarisés et bipolaires, à électrolyte solide et à électrolyte non solide, utilisés dans les équipements électroniques. Elle comprend les condensateurs utilisés dans des applications de longue durée de vie et les condensateurs utilisés dans des applications d’usage général. Les condensateurs pour des applications d’usage spécial peuvent nécessiter des exigences supplémentaires.
Le présent document couvre deux sous-familles fondamentales:
- Sous-famille 1: Condensateurs fixes au tantale, à électrolyte non solide et à anode poreuse.
- Sous-famille 2: Condensateurs fixes au tantale, à électrolyte solide et à anode poreuse.
Le présent document a pour objet de spécifier les valeurs assignées et caractéristiques préférentielles, de sélectionner, en se référant à l’IEC 60384-1:2016, les procédures d’assurance de la qualité, les essais et les méthodes de mesure appropriés et de donner les exigences de performance générales pour ce type de condensateur.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) La structure a été révisée selon les Directives ISO/IEC, Partie 2:2016 (septième édition) dans la mesure du possible, et harmonisée avec d’autres types de documents similaires.
b) En outre, l'Article 4 et tous les tableaux ont été revus afin d'éviter les doubles emplois et les contradictions.

General Information

Status
Published
Publication Date
21-May-2017
Current Stage
PPUB - Publication issued
Start Date
26-May-2017
Completion Date
22-May-2017
Ref Project

Buy Standard

Standard
IEC 60384-15:2017 - Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
English language
34 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 60384-15:2017 - Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
English and French language
70 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60384-15 ®
Edition 2.0 2017-05
INTERNATIONAL
STANDARD
Fixed capacitors for use in electronic equipment –
Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or
solid electrolyte
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 60384-15 ®
Edition 2.0 2017-05
INTERNATIONAL
STANDARD
Fixed capacitors for use in electronic equipment –

Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or

solid electrolyte
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.060.40 ISBN 978-2-8322-4319-0

– 2 – IEC 60384-15:2017 © IEC 2017
CONTENTS
FOREWORD . 5
1 General . 7
1.1 Scope . 7
1.2 Object . 7
1.3 Normative references . 7
1.4 Information to be given in a detail specification . 8
1.4.1 General . 8
1.4.2 Outline drawing and dimensions . 8
1.4.3 Mounting . 8
1.4.4 Ratings and characteristics . 8
1.4.5 Marking . 9
1.5 Terms and definitions . 9
1.6 Marking . 9
1.6.1 General . 9
1.6.2 Information for marking . 10
1.6.3 Marking on capacitors . 10
1.6.4 Marking on packaging . 10
2 Preferred ratings and characteristics . 10
2.1 Preferred characteristics . 10
2.2 Preferred values of ratings . 10
2.2.1 Nominal capacitance (C ) . 10
N
2.2.2 Tolerance on nominal capacitance . 11
2.2.3 Rated voltage (U ) . 11
R
2.2.4 Category voltage (U ). 11
C
2.2.5 Reverse voltage . 11
2.2.6 Surge voltage (U or U ) . 11
RS CS
2.2.7 Ripple (if required) . 11
2.2.8 Rated temperature . 12
3 Quality assessment procedures . 12
3.1 Primary stage of manufacture . 12
3.2 Structurally similar components . 12
3.3 Certified test records of released lots . 12
3.4 Qualification approval procedures . 12
3.4.1 General . 12
3.4.2 Qualification approval on the basis of the fixed sample size procedure . 12
3.4.3 Tests . 13
3.5 Quality conformance inspection . 20
3.5.1 Formation of inspection lots . 20
3.5.2 Test schedule . 21
3.5.3 Delayed delivery . 21
3.5.4 Assessment levels . 21
4 Test and measurement procedures . 22
4.1 Visual inspection and check of dimensions . 22
4.2 Electrical tests . 22
4.2.1 Leakage current . 22
4.2.2 Capacitance . 22
4.2.3 Tangent of loss angle (tan δ) . 23

4.2.4 Impedance (if required) . 23
4.2.5 Insulation resistance of the external insulation (if required) . 24
4.2.6 Voltage proof of the external insulation (if required) . 24
4.3 Robustness of terminations . 25
4.3.1 General . 25
4.3.2 Initial inspection. 25
4.3.3 Test Ua1, Ub and Uc applicable. 25
4.3.4 Special bending test . 25
4.4 Resistance to soldering heat . 26
4.4.1 General . 26
4.4.2 Conditions . 26
4.4.3 Final inspections and requirements . 26
4.5 Solderability . 26
4.5.1 General . 26
4.5.2 Test conditions . 26
4.5.3 Final inspections and requirements . 26
4.6 Rapid change of temperature . 26
4.6.1 General . 26
4.6.2 Initial inspection. 27
4.6.3 Test conditions . 27
4.6.4 Recovery . 27
4.6.5 Final inspections and requirements . 27
4.7 Vibration . 27
4.7.1 General . 27
4.7.2 Test condition . 27
4.7.3 Final inspections and requirements . 27
4.8 Bump . 27
4.8.1 General . 27
4.8.2 Mounting . 28
4.8.3 Test conditions . 28
4.8.4 Final inspections and requirements . 28
4.9 Shock . 28
4.9.1 General . 28
4.9.2 Mounting . 28
4.9.3 Test conditions . 28
4.9.4 Final inspections and requirements . 29
4.10 Climatic sequence. 29
4.10.1 General . 29
4.10.2 Initial inspection. 29
4.10.3 Dry heat . 29
4.10.4 Damp heat, cyclic, Test Db, first cycle . 29
4.10.5 Cold. 29
4.10.6 Low air pressure (if required) . 29
4.10.7 Damp heat, cyclic, Test Db, remaining cycles . 29
4.10.8 Recovery . 29
4.10.9 Sealing (if required) .
...


IEC 60384-15 ®
Edition 2.0 2017-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –
Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or
solid electrolyte
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 15: Spécification intermédiaire: Condensateurs fixes au tantale,
à électrolyte non solide ou solide

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60384-15 ®
Edition 2.0 2017-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –

Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or

solid electrolyte
Condensateurs fixes utilisés dans les équipements électroniques –

Partie 15: Spécification intermédiaire: Condensateurs fixes au tantale,

à électrolyte non solide ou solide

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.40 ISBN 978-2-8322-9329-4

– 2 – IEC 60384-15:2017 © IEC 2017
CONTENTS
FOREWORD . 5
1 General . 7
1.1 Scope . 7
1.2 Object . 7
1.3 Normative references . 7
1.4 Information to be given in a detail specification . 8
1.4.1 General . 8
1.4.2 Outline drawing and dimensions . 8
1.4.3 Mounting . 8
1.4.4 Ratings and characteristics . 8
1.4.5 Marking . 9
1.5 Terms and definitions . 9
1.6 Marking . 9
1.6.1 General . 9
1.6.2 Information for marking . 10
1.6.3 Marking on capacitors . 10
1.6.4 Marking on packaging . 10
2 Preferred ratings and characteristics . 10
2.1 Preferred characteristics . 10
2.2 Preferred values of ratings . 10
2.2.1 Nominal capacitance (C ) . 10
N
2.2.2 Tolerance on nominal capacitance . 11
2.2.3 Rated voltage (U ) . 11
R
2.2.4 Category voltage (U ). 11
C
2.2.5 Reverse voltage . 11
2.2.6 Surge voltage (U or U ) . 11
RS CS
2.2.7 Ripple (if required) . 11
2.2.8 Rated temperature . 12
3 Quality assessment procedures . 12
3.1 Primary stage of manufacture . 12
3.2 Structurally similar components . 12
3.3 Certified test records of released lots . 12
3.4 Qualification approval procedures . 12
3.4.1 General . 12
3.4.2 Qualification approval on the basis of the fixed sample size procedure . 12
3.4.3 Tests . 13
3.5 Quality conformance inspection . 20
3.5.1 Formation of inspection lots . 20
3.5.2 Test schedule . 21
3.5.3 Delayed delivery . 21
3.5.4 Assessment levels . 21
4 Test and measurement procedures . 22
4.1 Visual inspection and check of dimensions . 22
4.2 Electrical tests . 22
4.2.1 Leakage current . 22
4.2.2 Capacitance . 22
4.2.3 Tangent of loss angle (tan δ) . 23

4.2.4 Impedance (if required) . 23
4.2.5 Insulation resistance of the external insulation (if required) . 24
4.2.6 Voltage proof of the external insulation (if required) . 24
4.3 Robustness of terminations . 25
4.3.1 General . 25
4.3.2 Initial inspection. 25
4.3.3 Test Ua1, Ub and Uc applicable. 25
4.3.4 Special bending test . 25
4.4 Resistance to soldering heat . 26
4.4.1 General . 26
4.4.2 Conditions . 26
4.4.3 Final inspections and requirements . 26
4.5 Solderability . 26
4.5.1 General . 26
4.5.2 Test conditions . 26
4.5.3 Final inspections and requirements . 26
4.6 Rapid change of temperature . 26
4.6.1 General . 26
4.6.2 Initial inspection. 27
4.6.3 Test conditions . 27
4.6.4 Recovery . 27
4.6.5 Final inspections and requirements . 27
4.7 Vibration . 27
4.7.1 General . 27
4.7.2 Test condition .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.