iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC TR 62730:2012/AMD1:2024

(Amendment)

Amendment 1 - HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test

Amendment 1 - HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test

General Information

Status
Published
Publication Date
17-Jun-2024
ICS
29.080.10 - Insulators
Technical Committee
TC 36 - Insulators
Drafting Committee
MT 19 - TC 36/MT 19
Current Stage
PPUB - Publication issued
Start Date
14-Jun-2024
Completion Date
18-Jun-2024
Ref Project

Relations

Amends
IEC TR 62730:2012 - HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test
Effective Date
05-Sep-2023

Buy Standard

IEC TR 62730:2012/AMD1:2024 - Amendment 1 - HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test Released:6/18/2024 Isbn:9782832289372IEC TR 62730:2012/AMD1:2024 - Amendment 1 - HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test Released:6/18/2024 Isbn:9782832289372
PreviousNext
Technical report
IEC TR 62730:2012/AMD1:2024 - Amendment 1 - HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test Released:6/18/2024 Isbn:9782832289372
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC TR 62730 ®
Edition 1.0 2024-06
TECHNICAL
REPORT
colour
inside
AMENDMENT 1
HV polymeric insulators for indoor and outdoor use tracking and erosion testing
by wheel test and 5 000 h test

IEC TR 62730:2012-03/AMD1:2024-06(en)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.

IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.

Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need

further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC TR 62730 ®
Edition 1.0 2024-06
TECHNICAL
REPORT
colour
inside
AMENDMENT 1
HV polymeric insulators for indoor and outdoor use tracking and erosion testing

by wheel test and 5 000 h test

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.080.10  ISBN 978-2-8322-8937-2

– 2 – IEC TR 62730:2012/AMD1:2024
 IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HV POLYMERIC INSULATORS FOR INDOOR AND OUTDOOR USE
TRACKING AND EROSION TESTING BY WHEEL TEST AND 5 000 H TEST

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any div
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC TR 62730:2012(Main)
HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test

IEC/TR 62730:2012(E) is applicable to polymeric insulators whose insulating body consists of one or various organic materials. Polymeric insulators covered by this technical report include both solid core and hollow insulators. They are intended for use on overhead lines and in indoor and outdoor equipment with a rated voltage greater than 1 000 V. The object of this technical report is:
- to define the common terms used;
- to give the background behind the development and use of the 5 000 h multiple stress test and the tracking wheel test;
- to describe the test methods for the 5 000 h multiple stress test and the tracking wheel tests on polymeric insulators;
- to describe possible acceptance or failure criteria, if applicable. Key words: polymeric insulators, multiple stress test, 5000 h

  • Technical report
    19 pages
    English language
    sale 15% off
  • Technical report
    38 pages
    English language
    sale 15% off
IEC
IEC 62896:2024(Main)
Hybrid insulators for AC and DC for high-voltage applications greater than 1 000 V AC and 1 500 V DC - Definitions, test methods and acceptance criteria

IEC 62896:2024 applies to hybrid insulators for AC and DC applications greater than 1 000 V AC and 1 500 V DC consisting of a load-bearing insulating solid or hollow core consisting of ceramic or glass, a housing (defined geometry, outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core.
Hybrid insulators covered by this document are intended for use as suspension/tension long rod and cap and pin type insulators, line post insulators, station post insulators and hollow core insulators for apparatus.
The object of this document is to:
- define the terms used;
- prescribe test methods;
- prescribe acceptance criteria
This document does not include requirements dealing with the choice of insulators for specific operating conditions. This first edition cancels and replaces the IEC TS 62896 published in 2015. This edition includes the following significant technical changes with respect to the previous edition:
- modifications of terms and definitions;
- modifications of tests procedures included in IEC TR 62039 and IEC 62217 (Hydrophobicity transfer test);
- harmonization of Table 1 (Tests to be carried out after design and type changes) with other product standards and IEC 62217.

  • Standard
    42 pages
    English and French language
    sale 15% off
IEC
IEC 60437:2023(Main)
Radio interference test on high-voltage insulators

IEC 60437:2023 specifies the procedure for a radio interference (RI) test carried out in a laboratory on clean and dry insulators at a frequency of 0,5 MHz or 1 MHz or, alternatively, at other frequencies between 0,5 MHz and 2 MHz.
This document applies to insulators for use on AC or DC overhead power lines and overhead traction lines with a nominal voltage greater than 1 000 V.
This third edition cancels and replaces the second edition published in 1997. This third edition cancels and replaces the second edition published in 1997. This edition includes the following significant technical changes with respect to the previous edition:
a) Composite station post and composite hollow core station post insulators have been included;
b) All paragraphs of Samples test were actualized;
c) Sample test fast procedure was introduced.

  • Standard
    41 pages
    English language
    sale 15% off
  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 62772:2023(Main)
Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria

IEC 62772:2023 is available as IEC 62772:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62772:2023 applies to composite hollow core station post insulators consisting of a load-bearing insulating tube (core) made of resin impregnated fibres, insulating filler material (solid, liquid, gaseous – pressurized or unpressurized), a housing (outside the insulating tube) made of polymeric material (for example silicone or ethylene-propylene) and fixing devices at the ends of the insulating tube. Composite hollow core station post insulators as defined in this standard are intended for general use in substations in both, outdoor and indoor environments, operating with a rated AC voltage greater than 1 000 V and a frequency not greater than 100 Hz or for use in direct current systems with a rated voltage greater than 1 500 V DC. The object of this document is:
- to define the terms used;
- to specify test methods;
- to specify acceptance criteria.

  • Standard
    95 pages
    English language
    sale 15% off
  • Standard
    62 pages
    English and French language
    sale 15% off
IEC
IEC 61462:2023(Main)
Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V - Definitions, test methods, acceptance criteria and design recommendations

IEC 61462:2023 applies to composite hollow insulators consisting of a load-bearing insulating tube made of resin-impregnated fibres, a housing (outside the insulating tube) made of elastomeric material (for example silicone or ethylene-propylene) and metal fixing devices at the ends of the insulating tube (see Figure D.1 and Figure D.2 for examples). The object of this document is to define the terms used, to specify test methods; and to specify acceptance criteria. This document distinguishes between design tests and type tests because several general characteristics of a specific design and specific combinations of materials do not vary for different insulator types. This new edition cancels and replaces the previous edition published in 2007. This edition includes the following significant technical changes with respect to the previous edition:
a) modifications of terms and definitions;
b) modifications of tests procedures included in IEC TR 62039 and IEC 62217 (Hydrophobicity transfer test; Water diffusion test on the core with housing);
c) modification of Clause 8 (type tests) to reflect common practice and to also consider tapered (conical) insulators;
modification of order of the stages of mechanical sample test (9.4) by setting the tightness test as last stage;
d) harmonization of Table 3 (Tests to be carried out after design changes) with other product standards;
e) addition of a new informative Annex D: Principle sketch of hollow insulators design assembly;
f) addition of a new informative Annex E: Type tests on tapered (conical) insulators.

  • Standard
    102 pages
    English and French language
    sale 15% off
IEC
IEC 60383-1:2023(Main)
Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria

IEC 60383-1:2023 applies to insulators of ceramic material or glass for use on AC overhead power lines and overhead traction lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to insulators for use on DC overhead electric traction lines. This document applies to string insulator units, rigid overhead line insulators and to insulators of similar design when used in substations. lt does not apply to insulators forming parts of electrical apparatus or to parts used in their construction or to post insulators which are covered by IEC 60168, Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 000 V.
The object of this document is:
- to define the terms used
- to define insulator characteristics and to prescribe the conditions under which the specified values of these characteristics shall be verified
- to prescribe test methods
- to prescribe acceptance criteria.
This fifth edition cancels and replaces the fourth edition published in 1993. This edition includes the following significant technical changes with respect to the previous edition:
a) The layout of the document has been changed in order to increase readability;
b) RIV test has been added (Clause 14);
c) Impulse puncture test in air has been added (15.2);
d) Residual strength test has been added (Clause 21);
e) Zinc sleeve test has been added (Clause 28);
f) Impact test has been added (Clause 30);
g) Annex C, coatings on ceramic and glass insulators has been added;
h) Annex D, impact test has been added.

  • Standard
    125 pages
    English and French language
    sale 15% off
IEC
IEC 60433:2021(Main)
Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for AC systems - Characteristics of insulator units of the long rod type

IEC 60433:2021 is applicable to string insulator units of the long rod type with insulating parts of ceramic material intended for use in AC overhead power lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. It is also applicable to insulators of similar design, used in substations. This document is applicable to ceramic string insulator units of the long rod type, either with a clevis end fitting at both ends for coupling with a tongue, or with a socket end fitting at both ends for coupling with a pin ball. The object of this document is to prescribe specified values for electrical and mechanical characteristics, and for the principal dimensions of ceramic string insulator units of the long rod type. This fourth edition cancels and replaces the third edition published in 1998. This edition includes the following significant technical changes with respect to the previous edition:
- wording in Scope changed from "should" to "are intended to";
- new normative references added;
- title of Clause 4 amended, new Note 4 added;
- Table 1 expanded to include more specified mechanical failing loads.

  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 60305:2021(Main)
Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for AC systems - Characteristics of insulator units of the cap and pin type

IEC 60305:2021 applies to string insulator units of the cap and pin type with insulating parts of ceramic material or glass, intended for AC overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to insulators of similar design used in substations. This document applies to string insulator units of the cap and pin type either with ball and socket couplings or with clevis and tongue couplings. This document applies to string insulator units for use on overhead lines in clean areas and polluted areas. For use in areas characterized by very heavy pollution levels and for other particular or extreme environmental conditions, it may be necessary for certain dimensions to be changed and insulator units having different creepage distances, spacing and forms may be preferred (for example, flat profile, hemispherical etc.). Insulators for use on DC systems may also need different dimensions. In any case, it is applicable that the standardized mechanical characteristics of this document and coupling sizes are retained. This fifth edition cancels and replaces the fourth edition published in 1995. This edition includes the following significant technical changes with respect to the previous edition:
- wording in Scope changed from "it is recommended" to "it is applicable";
- new normative references added;
- electromechanical or mechanical failing load in Clause 4 specified;
- new figures added showing profiles.

  • Standard
    44 pages
    English language
    sale 15% off
  • Standard
    28 pages
    English and French language
    sale 15% off
IEC
IEC 60120:2020(Main)
Ball and socket couplings of string insulator units - Dimensions

IEC 60120:2020 define the dimensions of a series of standard ball and socket couplings using the standard locking devices (see IEC 60372) in order to permit the assembly of insulators or metal fittings supplied by different manufacturers. This document applies to string insulator units of the cap and pin and long rod types and their associated metal fittings. For the pin ball and the socket, dimensions apply to the finished product after any surface treatment. Extreme positions of the pin ball in the socket are given in annex. Typical examples of gauges for checking the dimensions of pin balls and sockets are given in annex.

  • Standard
    74 pages
    English and French language
    sale 15% off
IEC
IEC 60372:2020(Main)
Locking devices for ball and socket couplings of string insulator units - Dimensions and tests

IEC 60372:2020 is applicable to locking devices used with ball and socket couplings of string insulator units and used with the corresponding metal fittings standardized in IEC 60120, when they are supplied separately.The object of this document is
- to define the shapes and some standard dimensions for locking devices,
- to define the test methods for locking devices,
- to state the acceptance conditions for supply,
- to give other dimensions for guidance of manufacturing only.
This fourth edition cancels and replaces the third edition published in 1984. This edition includes the following significant technical changes with respect to the previous edition:
a. Two new designated size of couplings, 36 and 40, were introduced;
b. the relevant content of the 28B W-clip was deleted;
c. Annex A is informative, Annex B is normative, Annex C is informative.

  • Standard
    37 pages
    English and French language
    sale 15% off